CERTAIN BR REPAIRS AND WELCOME MAINT TO OFFRS MD ACCN IN SITE 3 AND 4 UNDER AGE BR I OF GE (WEST) FEROZEPUR CANTT

Amount

Demolition brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and directed.

All as per Srl item No 2 here-in-before but using old bricks retrieved from item No 1 demolition including cleaning and removal of mortar from old bricks complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

M&L non-skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L non-skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sqm in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L non-skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sqm as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with and including10 mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L glazed coloured and cereamic tiles in vertical surfaces 300mmX200mm or 450mmX300mm and7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed.

M&L green marble slab, 16-18mm thick of size not less than 1 Sqm each, machine cut as cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar 1:4 and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified & directed.

M&L granite (of any type) tiles 16- 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Dark Shade)cement to match over and including 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L light shade vitrified tile 10mm thick polished, area of tile not exceeding 0.36 sqm as in skirting set and jointed in cement slurry over and including 15mm thick screed in cement mortar 1:6 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L hardcore of broken bricks of gauge not exceeding 63mm, deposited spread and leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L 40mm thick cement concrete 1:2:4, type B-1(using 20mm graded stone aggregate) as in floor topping surfaces finished even and smooth without using extra cement complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L machine pressed precast conctete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade including laying of sand cushioning, etc, complete all as specified and as directed. Note:- Sand shall be measured and paid for seperately.

M&L 75mm thick cement concrete 1:4:8, type D-2 (using 20mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in filling of steel chowkhats,bed blocks, coping etc including necessary form work complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed.

All as per Srl item No 23 here-in-before but size exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

Taking down shutters of any description and refixing in the same opening exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

M&L cutting holes in brick wall built in cement mortar for fixing hold fasts and making good dismantled portion in cement mortar 1:3 or in cement concrete 1:2:4, type B-1(using 20mm graded stone aggregate) ,depth of embedded portion of hold fasts measured from the face of jamb into wall exceeding half brick but next one brick complete all as specified and directed.

M&L pressed steel frames made of 1.25mm thick MS sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed.

All as per Srl item No 27 here-in-before but size 125mmx60mm with double rebate complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed. Make: Rajshri or equivalent in approved makes.

S&F second class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good disturbed surfaces of wall complete all as specified and directed.

S&F 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

Demolition of boarding of any description and in any position complete all as specified and directed.

S&F 20mm thick boarding second class hard wood & fixed with nails in any situation clean sawn with butt joints fixed in shelves partitions and shelves of built in cup boards almirahs book cases toilet boxes racks, pelments and similar work complete all as specified and directed.

S&F 14-16 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters complete all as specified and directed. Makes : Rajshree/ Echon or equivalent in approved makes.

M&L 2nd class HW plain fillets square, rectangular in section clean swan, secured with nail or band including two coats of paint over a coat of primer not exceeding 13 Sqm complete all as specified and directed.

S&F 18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in pelmet box or cup board shelf including 6 mm thick teak wood leaping on three sides and 20mm thich on hanging side & french polishing to edging,fixed in repair complete all as specified and directed.

S&F 3.00mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares not exceeding 0.50 Sqm complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F in repair 300mm mild steel helical door spring including roller and roller plate complete all as specified and directed.

S&F in repair to 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares not exceeding 0.50 Sqm including hacking out old broken glass and putty/beading complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm Extruded aluminium alloy handle complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B21 complete all as specified and directed.

S&F butt hinges 125mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and directed.

S&F in repair 4 lever aluminium mortice lock,vertical type size 100 mm complete all as specified and directed.

S&F hydraulically extruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as specified and directed.

S&F in repair Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified and directed.

S&F in repair continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified and directed.

Taking down cement plaster inlcuding racking out joints, hacking for keys, scrubing down with water complete all as specified and directed.

M&L 10 mm thick rendering in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth with out using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4 on any face of brick walls or conrete surfaces, surfaces finished even and fair complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc complete all as specified & directred.

M&L Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and directed.

M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and directed.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed.

S&F in repairs15mm bore fancy type, chromium plated, with long shank and cup (concealed type) stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle,fixed in repairs complete all as specified and directed.

Supply & fixing in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs PVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 15mm bore CP Bib tap, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed..

S&F 15mm bore chromium plated, Fancy type pillar tap, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified and directed.

S&F in repair of CP WHB mixer 15mm bore mixing and hot and cold water scrwed down for iron pipe and fixed. and waste system with 450mm long braided hoses complete all as specified and directed.

S&F chromium plated fancy type15mm bore dia hot and cold wall mixer with provision forover head with 115mm long bend pipe one upper side connecting legs and wall flanges complete all as specified and directed. Makes: -Model No FLR 5219 N of make "Jaquar" or techno-commercially equivalent in approved makes.

S&F in repair stop cock Cast copper alloy screwed down, high pressure with with fancy type chromium plated screwed both ends for iron pipe or union of 15 mm bore fixed in repairs complete all as specified and directed.

S&F aluminium CP 20mm dia towel rail of 60cm long fixed with brackets at its ends as fixed in repairs complete all as specified and directed.

S&F CP Soapdish Oval /squaretype as fixed in repairs complete all as specified and directed.

S&F CP Toilet Paper Holder with Flap as fixed in repairs complete all as specified and directed.

S&F 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall , overall size of sink 495mmx420mm, bowl size 410mmx330mmx 160mm as in repair complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs complete all as specified and directed.

S&F in replacement of pressure JET for EWC including PVC connection and CP fitting as fixed in repairs complete all as specified and directed.

S&F in repair to CP towel ring square/round complete all as specified and directed.

S&F Health faucet (Jaquar model No: ALD-CHR-585)(ABS Body) with 8mm dia 1.00 m long easy flexible tube chormium coated finish and wall hook complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white/coloured cascade type 640X360X690 (monolithic flush cistern type) Make: Jaquare Model NO:SLS WHT-6853S/CERA Cat No: s1013132 s single picece wc with PP seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm complete all as specified and directed.

S&F Syphon Kit including EPDM rubber washer for Monolithic or Cascade type of flush cistern for vitreous china 10 ltr capacity as fixed in repairs complete all as specified and directed.

S&F vitreous china wash hand basin size 550mmx400mm (pedestal pattern) including necessary fittings to fixed with wall complete set and brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F in repair Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and directed.

S&F in repair Rotational moulded Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank complete all as specified and as directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440mm with integral foot rests including necessary cement concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair complete all as specified and directed.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair complete all as specified and directed.

S&F as in repair toilet seat cover plastic for wahdwon water closet with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F 1.00mm thick stainless steel plate racks of size 750mmX600mmX250mm complete all as specified and directed.

S&F vitreous China WHB white flat back size of 550mmX400mm excluding taps waste chain and plug and porcelien stopper but including brakets 32mm dia Waste pipe as fixed in repairs complete all as specified and directed. Makes : Parryware/Cera or equivalent in approved makes.

S&F 20mm dia mild steel PVC colour powder coated curtain rod with fancy type brackets including with all fittings as fixed in repairs complete all as specified and directed.

Taking down eaves gutters and rain water pipes( any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) with access door bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) with access door bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 15mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed.

S&F, in repair, Gypsum Board 6 to 7 mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) including aluminium anodised/powder coated snap grid frame 605mmX605 mm for false ceiling including hanging arrangement complete all as specified and directed. Note:-The hanging stay wire shall not be less than 4.00mm thick and the quoted rates shall deemed inclusive of hanging arrangment.

Dismantling of steel work including doors ,gates but excluding framed truss complete all as specified and directed.

S&F Rolled section as in post /pillars where connected with angle cleat or other connecting plate etc of fe 410-W(grade E-250)quality 'B' including fabrication , erection and fixing complete all as specified and directed.

S&F rolled mild steel plates Fe 410 -W (Gde-E- 250) quality- A(plain or chequered) channels, square cut or notched (ordinary and counter sunk ) forming holes without any attachment complete all as specified and directed.

S&F Mild steel screw bolts of 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exceeding 15cm and not exceeding 22.5cm long complete all as specified and directed.

Dismantling plain or corrugated sheet on roof covering complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J- type or L- type hook bolts complete all as specified and directed.

S&F Powder coated of ( any colour ) aluminium door window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size, including necessary joining cleats, glazing clips,powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc including taking down complete all as specified and directed. Note: EPDM Rubber beading/gasket measured and paid for seperately.

S&F Aluminium decogrill 10 mm thick with necessary chanels and clips DG 104 complete all as specified and directed.

S&F solar control film 25 micron reflective sticked to glass panes as per manufacturers instruction complete all as specified and directed.

Supply only EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L brushing neat cement slurry with 3 kg of cement per square meter complete all as specified and directed.

M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane complete all as specified and directed. Note: WPC shall be measured and paid for separately

M&L 10mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 mixed with water profing comund @3% by weight of cement content as in verticle surfaces and finished even and smooth without using extra cement complete all as specified and directed. Note: WPC measured and paid for seperately.

Supply only water proofing compound complete all as specified and directed.

M&L Tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per square metre including preparation of roof surfaces complete all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Laid on primed surface by forced application including bitumen primer complete all as specified and directed.

M&L 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and directed.

S&F 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar 1:3 mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as per Srl item No 134 here in before but except tiles.

M&L Plain cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in , kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices upto double/single storey incl cleaning to paint patchs from window glass, floors & doors complete all as specified and directed..

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling upto double/single storey incl cleaning to paint patchs from window glass, floors & doors complete all as specified and directed.

M&L preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of Colour wash on walls including cornices complete all as specified and directed.

M&L washing rubbing down and stopping of distempered and painted surfaces incl preparation and applying one coat of oil bound distemper upto double/single storey including cleaning to paint patchs from window glass, floors & doors complete all as specified and directed.

All as per Srl item No 140 here-in-before but on Ceiling including cleaning to paint patchs from window glass, floors & doors comlete all as specified and directed.

M&L complete removal of existing treatment of wall suface and applying two coats of oil bound distemper, over a coat of primer on a coat of wall care putty, complete upto double/single storey incl cleaning to paint patchs from window glass, floors & doors comlete all as specified and directed.

M&L washing rubbing down and stopping of distempered and painted surfaces incl preparation and applying one coat of cement based paint on wall surfaces including proper curing upto double/single storey incl cleaning to paint patchs from window glass, floors & doors complete all as specified and directed.

M&L complete removal of existing treatment of walls applying two coats of cement based paint over one coat of cement primer on plastered surfaces upto single/double storey incl cleaning to paint patchs from window glass, floors & doors complete all as specified and directed.

M&L preparation of old wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old decorative steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint incl cleaning to paint patchs from window glass, floors & doors complete all as specified and directed.

M&L complete removal of existing treatment on terra- cotta floor surfaces like a pathway pavers , Chequered, inlerlocking tile, roof tiles surfaces etc including necessary preparation of surfaces and applying two coats of expoxy exterior emulsion paint over a coat of primer complete all as specified and directed.

M&L writing letters or figures (Block Roman Italic and Indian ) 15 cm High on wall surfaces, so that the stand out boldly and solidly without showing signs of brush marks complete all as specified and directed. Note :- The letters to be write with in the black synthetic enamel painted back ground, it is measured and paid for seperately

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide zink primer on steel surfaces complete all as specified and directed.

M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L cleaning and removing all scale and dirt, etc, from 500 Ltr tanks and from mouths of circulating pipes, etc incl Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L cleaning and removing all scale and dirt, etc, from 1000 Ltr tanks and from mouths of circulating pipes, etc incl Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Easing of wooden window shutters/CB shutters (One unit shall comprise of one window/ CB/ Showcase irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt including necessary nail and screws etc complete all as specified and directed.

Easing of wooden door shutters (One unit shall comprise of one Panelled or skeltion door shutter irrespective of number of leaves) for properly closing/opening, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt including necessary nail and screws etc complete all as specified and directed.

Taking down and refixing of Gypsum Board 6 to 7 mm thick in ceiling fixed with screw 60cmx60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) including aluminium anodised/powder coated snap grid frame 605mmX605 mm for false ceiling including hanging arrangement complete all as specified and directed.

M&L welding in repairs exceeding 6mm but not exceeding 9 cm in length, thickness of metal to be welded complete all as specified and welding exc 2.5cm but not exceeding 5cm in length complete all as specified and directed.

Refixing shutters in same opening exceeding 1.5 Sqm but not exceeding 4.0Sqm each complete all as specified and directed.

Refixing shutters in same opening not exceeding 1.5Sqm each complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keetping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors ,etc complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceablein all respects complete for reuse) complete all as specified and directed.

M&L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories if require such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and new MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole one way switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Srl Item No 161 here-in-before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

All as per Srl item No 161 here-in-before but existing conduit and existing Ms pressed steel/ cast iron box complete all as speicifed and directed. (a) One light point/fan/bell point controlled by one single pole one way switch.

(b) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Srl item No 165 here-in-before but existing conduit and existing Ms pressed steel/ cast iron box complete all as speicifed and directed.

S&F new MS pressed steel/cast iron sunken boxes rectangular block in relacement of old rusted sunken box. The MS Pressed Steel/ CI Box shall be galvanised or painted black with two coats of black bituminous paints or any other paint as indicated .The MS pressed steel/cast iron sunken boxes should be suitable for mounting of normal/modular switches, sockets, fan regulator etc and the item rate quoted also including making good the disturbed surfaces to match with the existing surface. The new MS pressed steel/cast iron sunken boxes suold be of following sizes with suitable thickness as per IS Code complete all as specified and directed. (a) 8" x 10" and Suitable for Main switch board

(b) All as per Srl item No 168 here-in-before but of size 7"x4" and Suitable for 15 Amp Independent board complete all as specified and directed.

(c) All as per Srl item No 168 here-in-before but of size 4"x4" and Suitable for 05 Amp Independent board.

S&F bakelite sheet hylam 3mm thick of white top fixed with cup washers, machine screws on new/existing MS Shuken box including removing existing switch/ switch sockets/ bell push etc and refixing the only servicable switchs/socket by making slots on new sheet complete all as specified & directed (a) Min approx size 9"x11" and Suitable for Main switch board

(b) All as per Srl item No 171 here-in-before but of Min size 8'' x 5" and Suitable for 15 Amp Independent board complete all as specified and directed.

(c) All as per Srl item No 171 here-in-before but of Min size 5'' x 5" and Suitable for 05 Amp Independent board complete all as specified and directed.

Supply & Fixing in repair Switch piano flush type single pole one way 5/6 Amp complete all as specified and directed.

Supply & Fixing in repair Switch piano flush type 15 amps, single pole one way duly ISI marked complete all as speicifed and directed.

Supply & Fixing in repair Socket outlet 2 in one , 5/6 Amps flush type ISI marked complete all as speicifed and directed.

Supply & Fixing in repair complete all as speicifed and directed. air Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked complete all as specified and directed.

Fixing only servicable Switch piano flush type single pole one way 5/6 Amp obained from Item srl No 160 complete all as specified and directed.

Fixing only servicable Switch piano flush type 15 amps, single pole one way duly ISI marked obained from Item srl No 160 complete all as specified and directed.

Fixing only servicable Socket outlet 2 in one , 5/6 Amps flush type ISI marked obained from Item srl No 160 complete all as specified and directed.

Fixing only servicable Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked obained from Item srl No 160 Note for Srl item No 178 to 181: Only Servicable Item should be fixed at site and rate for taking down of item is included in srl item No 160.

S&F in repair Ceiling rose surface type, PVC/polycarbonate , isolated, bakelite 65mm x 50mm, 3 terminals ISI marked complete all as specified and directed.

S&F in repair Lamp holder insulated body threaded dome pattern, suitable for bracket / batten fitting complete all as specified and directed.

S&F in repair stepped type electronic fan regulater flush, socket type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S&F in repair bell push piano flush type 5 Amps single pole duly ISI marked complete all as specified and directed.

S&F in repair bell ding dong AC 230 volts single pole complete all as specified and directe complete all as specified and directed.

S&F in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Make:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified and directed. Make:- Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame , 1 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 2 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 3 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 4 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 6 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular white cover plate with frame, 8 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 1/2 module , complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 3 module , complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 4 module , complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 6 module , complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Metal flush box 8 module , complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular Bell push 6A, 1 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

S&F in repair Modular step type regulator,120 W - 2 module complete all as per specified and directed. Makes:- Precision/Anchor/Havells/Legrand

Supply and fixing in repair LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as per specified and directed.

Supply & Fix in repair LED tube light fitting 9 watts batten type fixed on wall/ ceiling etc. including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as per specified and directed.

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as per specified and directed.

S&F decorative gate light/garden light made up of high grade unbreakable polycarbonate material suitable for LED Lamp (B22) - Moon 200 base suitable for mounting Pole Dia - 60 mm (max) OD. Dimension: Width: 200 mm & Height: 227 mm for Moon 200 decorative gate light complete all as per specified and directed.

S&F LED Driver for LED Bldg security light/ceiling light upto 45 W including all connection and suitable size of copper wire complete all as specifed and directed. Makes:- Cat part No S0DQL-65-700-45W of Crompton or techno-commercially equivalent in approved makes.

Supply & Fix in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as per specified and directed.

All as per Srl item No 210 here-in-before but SPN DB's 4 way complete all as per specified and directed.

S&F in repair sheet metal enclouser DB's TPN 4 way double door (Vertical Type) factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as per specified and directed.

S&F MCCB 63 Amps 415 Volts 16KA breaking capacity complete all as per specified and directed.

S&F MCB TPN 415 volts 63 Amps, 10 KA breaking capacity complete all as per specified and directed.

S&F MCB single pole neutral(SPN) 240 volts, 40 Amps, 10 KA complete all as per specified and directed.

S&F MCB single pole (SP) 240 volts, 6 to 32 Amps, 10 KA complete all as per specified and directed.

Supply & Fix in repair sub main wiring of 6 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia complete all as per specified and directed. Note:-Two run of single core 6 sqmm cable and one run single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

B.L. Chaudhri and Co. (BID ID -3396829)

Vee Vee Enterprises (BID ID -3396704)

M/S N Maini Constrution (BID ID -3400544)

JAWAHAR CONSTRUCTION COMPANY (BID ID -3399434)