SPECIAL REPAIR TO LT OVER HEAD ELECTRIC DISTRIBUTION LINES WITH UG CABLE AT HAJIPIR LINE AND FCSR KLP AREAS UNDER GE SHILLONG

Amount

Dismantling of ACSR conductor any size or any type from poles / structure etc complete all as specified and directed by Engr-in-Charge.

Dismantling cross-arms of mild steel channel or angle sections etc. complete any size or any type from poles/ structure etc complete all as specified and directed by Engr-in-Charge.

Dismantling insulators of any size or any type from poles / structure etc complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in hard/dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc. and for foundation of poles, stays etc. n exceeding 10 sqm on plan and n exceeding 1.5 in depth and getting out complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick of soft/loose soil in trenches/pit complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 m and depositing where directed not exceeding 1.5 m above the starting point complete all as specified and directed.

M & L for sand cushioning to underground cable for protection with fine river sand over, under ground cable laid in trenches and gently punned to cushioning to cable complete all as specified and directed.(Note: Thickness of sand cushion after punning down will be measured and paid.)

M & L for Sub class 'B' old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed.

Supply, laying, connecting and testing XLPE LT insulated armoured with aluminium stranded conductor under ground cable of size 185 sqmm 3.5 core laid in trenches/or fixed on pole with suitable size cable glands crimping type cable lugs etc complete all as specified and directed. Note: Excavation & earth work will be measured and paid separately.

All as per Item No 9.00 here in before but size of cable 70 sqmm, 3.5 core

All as per Item No 9.00 here in before but size of cable 50 sqmm, 3.5 core

All as per Item No 9.00 here in before but size of cable 35 sqmm, 3.5 core

All as per Item No 9.00 here in before but size of cable 25 sqmm, 4 core

All as per Item No 9.00 here in before but size of cable 16 sqmm, 4 core

All as per Item No 9.00 here in before but size of cable 10 sqmm, 4 core

All as per Item No 9.00 here in before but size of cable 16 sqmm, 2 core

M&L for making cutting / demolition on existing road for laying various size of cables under road and making good with PCC 1:3:6 type C1 using 20 mm graded stone aggregate to match with the adjustant surface complete all as directed.

Supply, laying or fixing 100 mm bore galvanised iron tubing, light grade, with all fittings for passing of cables laid in trenches or fixed to walls/poles complete all as specified and as directed.

Supply, laying or fixing 50 mm bore galvanised iron tubing, light grade, with all fittings for passing of cables laid in trenches or fixed to walls/poles complete all as specified and as directed.

Supply, laying or fixing 40 mm bore galvanised iron tubing, light grade, with all fittings for passing of cables laid in trenches or fixed to walls/poles complete all as specified and as directed.

Supply, laying, testing and commissioning of CPRI approved factory made outdoor feeder pillar box IP-65 dust and vermin proof, free standing, outer body/ outer door/roof/mounting channel fabricated with 3.15 mm thick CRCA sheet and compartment door with 2mm thick CRCA sheet chemically treated, powder coated with suitable size of treated insulated compartment of busbar MCCB's, MCB's overall front and rear door with locking arrangement , air vent minimum 2 Nos, suitable channel (minimum 75mmx40mmx5mm), internal copper wiring and gland of suitable size including excavation and PCC work around and the panel board within 1 mtr all around area complete all as specified and directed by Engr-in-Charge with the following accessories. INCOMING:- (a) Bus bar chamber with aluminium strip busbar of suitable size, 3 phase 4 wire system capacity 300 Amps including all fixing accessories-01 Set. (b) CTs - 100/5 Amps - Set of three. (c ) 630 A, 4 pole 50 KA Thermal Magnetic release type MCCB ( Incomer ) -01 No (d) LCD Multi function meter -01 No (e) Phase indicator Lamps (RYB phase) -01 Set (Set of three) LED Cluster type . OUTGOING: (a) 250 A, 4 pole 25 KA Thermal Magnetic release type MCCB - 02 Nos. (b) 125 A, 4 pole 25 KA Thermal Magnetic release type MCCB - 05 Nos (c) Timer and connector for street light 63 Amps - 01 No

Supply, laying, testing and commissioning of CPRI approved factory made outdoor feeder pillar box IP-65 dust and vermin proof, free standing, outer body/ outer door/roof/mounting channel fabricated with 3.15 mm thick CRCA sheet and compartment door with 2mm thick CRCA sheet chemically treated, powder coated with suitable size of treated insulated compartment of busbar MCCB's, MCB's overall front and rear door with locking arrangement , air vent minimum 2 Nos, suitable channel (minimum 75mmx40mmx5mm), internal copper wiring and gland of suitable size including excavation and PCC work around and the panel board within 1 mtr all around area complete all as specified and directed by Engr-in-Charge with the following accessories. INCOMING:- (a) Bus bar chamber with aluminium strip busbar of suitable size, 3 phase 4 wire system capacity 300 Amps including all fixing accessories-01 Set. (b) CTs - 100/5 Amps - Set of three. (c ) 400 A, 4 pole 36 KA Thermal Magnetic release type MCCB ( Incomer ) -01 No (d) LED Multi function meter -01 No. (e) Phase indicator Lamps (RYB phase) -01 Set (Set of three) LED Cluster type. OUTGOING: (a) 250 A, 4 pole 25 KA Thermal Magnetic release type MCCB - 02 Nos. (b) MCCB 4 Pole, 100 Amps, 415V 25 KA - 02 Nos (c) MCCB 4 Pole, 63 Amps, 415V 25 KA - 02 (d) Timer and connector for street light 63 Amps - 01 No (e) Space for MCCB 4 pole 100 Amps 415V, 25 KA-01 No.

Supply, laying, testing and commissioning of CPRI approved factory made outdoor feeder pillar box IP-65 dust and vermin proof, free standing, outer body/ outer door/roof/mounting channel fabricated with 3.15 mm thick CRCA sheet and compartment door with 2mm thick CRCA sheet chemically treated, powder coated with suitable size of treated insulated compartment of busbar MCCB's, MCB's overall front and rear door with locking arrangement , air vent minimum 2 Nos, suitable channel (minimum 75mmx40mmx5mm), internal copper wiring and gland of suitable size including excavation and PCC work around and the panel board within 1 mtr all around area complete all as specified and directed by Engr-in-Charge with the following accessories. INCOMING:- (a) Bus bar chamber with aluminium strip busbar of suitable size, 3 phase 4 wire system capacity 300 Amps including all fixing accessories-01 Set. (b) CTs - 100/5 Amps - Set of three. (c ) 160 A, 4 pole 36 KA Thermal Magnetic release type MCCB ( Incomer ) -01 No (d) LED Multi function meter -01 No. (e) Phase indicator Lamps (RYB phase) -01 Set (Set of three) LED Cluster type. OUTGOING: (a) 63 A, 4 pole 25 KA Thermal Magnetic release type MCCB - 04 Nos. (b) Space for MCCB 4 pole 63 Amps ,415 V ,25 KA - 02 Nos

Supply, laying, testing and commissioning of CPRI approved factory made outdoor feeder pillar box IP-65 dust and vermin proof, free standing, outer body/ outer door/roof/mounting channel fabricated with 3.15 mm thick CRCA sheet and compartment door with 2mm thick CRCA sheet chemically treated, powder coated with suitable size of treated insulated compartment of busbar MCCB's, MCB's overall front and rear door with locking arrangement , air vent minimum 2 Nos, suitable channel (minimum 75mmx40mmx5mm), internal copper wiring and gland of suitable size including excavation and PCC work around and the panel board within 1 mtr all around area complete all as specified and directed by Engr-in-Charge with the following accessories. INCOMING:- (a) Bus bar chamber with aluminium strip busbar of suitable size, 3 phase 4 wire system capacity 300 Amps including all fixing accessories-01 Set. (b) CTs - 100/5 Amps - Set of three. (c ) 250 A, 4 pole 36 KA Thermal Magnetic release type MCCB ( Incomer ) -01 No (d) LED Multi function meter -01 No. (e) Phase indicator Lamps (RYB phase) -01 Set (Set of three) LED Cluster type. OUTGOING: (a) 100 A, 4 pole 25 KA Thermal Magnetic release type MCCB - 06 Nos. (b) MCCB 4 pole 63 Amps ,415 V ,25 KA - 02 Nos (c) Space for MCCB 4 pole 100 A - 02 Nos

Supply, laying, testing and commissioning of CPRI approved factory made outdoor feeder pillar box IP-65 dust and vermin proof, free standing, outer body/ outer door/roof/mounting channel fabricated with 3.15 mm thick CRCA sheet and compartment door with 2mm thick CRCA sheet chemically treated, powder coated with suitable size of treated insulated compartment of busbar MCCB's, MCB's overall front and rear door with locking arrangement , air vent minimum 2 Nos, suitable channel (minimum 75mmx40mmx5mm), internal copper wiring and gland of suitable size including excavation and PCC work around and the panel board within 1 mtr all around area complete all as specified and directed by Engr-in-Charge with the following accessories. INCOMING:- (a) Bus bar chamber with aluminium strip busbar of suitable size, 3 phase 4 wire system capacity 300 Amps including all fixing accessories-01 Set. (b) CTs - 100/5 Amps - Set of three. (c ) 250 A, 4 pole 36 KA Thermal Magnetic release type MCCB ( Incomer ) -01 No (d) LED Multi function meter -01 No. (e) Phase indicator Lamps (RYB phase) -01 Set (Set of three) LED Cluster type. OUTGOING: (a) 160 A, 4 pole 25 KA Thermal Magnetic release type MCCB - 02 Nos. (b) MCCB 4 pole 100 Amps ,415 V ,25 KA - 02 Nos (c) Space for MCCB 4 pole 63 A - 03 Nos

Supply and fix Factory made street light junction box of size 340x160x90mm made of high quality polycarbonate with IP-65 protection (Dust and vermin proof according to IEC-60529) Totally insulated made of halogen and silica free recyclable material having high quality gasket made out of polyurethane with and including 01 No MCB, SP, 10KA, 6 Amps for control street light with two cable gland for cable size 10/16 sqmm etc and fixing on pole with fixing arrangements such as clamps, nuts, bolts etc duly two coat of synthetic enamelled paint over a coat of red oxide primer on steel surfaces all as specified & directed by Engr-in-Charge. Make : Hensel/Sintex/Bentex.

Supply and fixing three single core multi stranded copper conductor cable of size 2.5 sqmm FRLS for phase neutral and earth continually drawn through steel tubular pole with both side connection street light and pole mounted street light junction box inclusive of copper terminals complete all as specified & directed. Note: Three runs of cable will be measured and paid as one run.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 m deep below normal ground level, connected to GI earth strip 32 x 5 mm by means of nuts, bolts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point protected by and including GI pipe 40 mm bore (light grade) and connected to main test point as directed and including concrete pit in PCC (1:3:6) type C-1,pre cast RCC (1:1½:3) type A-1 cover slab 54cm x 54cm x 5 cm, reinforced with 8mm dia TMT bars @ 150 mm C/C both ways with one handle for lifting, made out of 8mm dia TMT bar embedded in pre cast cover slab , funnel, wire mesh, 20 mm bore GI pipe (medium grade) for watering, charcoal and salt in alternate layers, including necessary excavation and earth work in any type of soil complete all as shown on electrical Plate No 3 of SSR Part-I, and testing complete all as specified and as directed .

M/S D.R enterprise

M/S AKC ENTERPRISE

DWEL ENTERPRISE

M/s Nishi Kumar Das

HAMZA CONSTRUCTION CO

Arbind Enterprise