Re-organization of 33KV OHTL feeder no 1,2,3 and 4 at 132KV Substation for making arrangement for charging/energize newly erected DCDS transmission line for providing power supply to under construction 2 X 10MVA, 33/6.6KV Substation under Dipka Area.

Erection of 13/16 mtr. long steel tubular poles including excavation of pole pit as per site conditions and grouting by cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) etc (0.38 cum each pole)

Supplying & erection of galvanised stay set for 33 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Stringing of Panther conductor (all 3 Nos. conductor), including un-coiling from drum at stockyard, loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding on insulators and jumpering etc. as required. Route length about 80 mtr x 4 feeder + sag

Anti climbing device and danger board

Laying & stringing of rabbit conductor as earth continuity wire.

Painting & numbering etc (pole & brackets with Red oxide & aluminium paint)

Fabrication & erection of MS Channel/Angle/Flat for bracket or clamp as per requirement.

Supplying and fixing of MS nut, bolt of different size as required

Erection of cradle guarding wire between the span including binding of guard wire.

Supplying & erection of 11 KV disc insulator for 33 KV overhead lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required