REPAIRS TO FENCING HARDSTANDING SEWAGE LINE MANHOLE SWR PIPES AND CLEANING OF SEWAGE LINE IN ZONE B AREA AT NDA KHADAKWASLA

Amount

Attending to blockage of WHB, WC, sinks, urinals, floor, Nahani traps, gully trap, vertical CI pipe/PVC pipes of any dia (upto double story bldg),Taking out (desludge) silt brick bats, debris,liquid waste sludge in solid semi-solid state from manhloles incl pumping the flow in the drain if necessary plugging, diverting the flow in the drain if necessary and stacking the removed slit away from the edges of manholes as directed incl use of safety belts dry cell tourch for lighting inside the manholes and taking precautionarty measure and removing the sludge to a distance exceeding 50m and not exceeding 250m and leaving the manhloles cleaned and flushed with water etc incl taking out and refixing the manholes covers etc in any depth and Removing of blockage in sewage lines in any length and systematically cleaning the same using necessary tools, mechanically and /or manually such as passing rope knots, bamboo kasui and disc of required size by one safaiwala and one helper per day including Sunday & holiday i.e from 0900 hrs to 1700 hrs all as specified and directed by Engineer-in-charge. (a) Safaiwala incl necessary T&P

Ditto all as per item No 1 above but helper

Taking out (desilting) silt brick bats, debris,liquid waste sludge in solid semi-solid state from septic tanks using mechanical means and stacking the removed slit away from the edges of tank as directed and removing the sludge to a distance exceeding 1.0 Km and leaving the septic tanks cleaned and flushed with water etc incl taking out and refixing the septic tank covers etc.

Excavation in trenches n. exe 1.5m wide & n. exe 1.5m depth for foundation etc and getting out in dense soil.

Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above ground level complete all as directed & cleaning premises.

Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillers etc..

Demolition and breacking up 150 mm bore drain pipes (SWG,AC or RCC pipes) set in CM

Demolition and breacking up 200 mm bore drain pipes (SWG,AC or RCC pipes) set in CM

Demolition and breacking up 300 mm bore drain pipes (SWG,AC or RCC pipes) set in CM

M&L for providing plain cement concrete (1:4:8) type D2 (Using 40mm grade stone agg. As in foundation filling and mass concrete

M&L for precast cement concrete block walling exc. 10 cm width with solid block C-5 grade design mix and setting in cement mortar (1:6) complete all as specified and as directed by the Engineer-in-Charge.

M&L for providing rendering 15mm thick on other than fair faces & brick or concrete surfaces in CM (1:4) finishing even without using exta cement fair

M&L for preparation of newly plastered/concrete wall surface and applying two coats of cement base paint.

Cutting into existing manholes for connecting new drains internal dia of pipe 150mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering

Cutting into existing manholes for connecting new drains internal dia of pipe 200mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smoothcutting out existing benching for forming branch channel (1/2) rendering

Extra for forming fair finished drain or channel girth not exc 30cm in cement concrete using extra cement including form mounds etc all as specified.

M&L for provided reinforced cement concrete pipe 150mm bore class NP-2 with collars laid and jointed with cement all as directed and specifed

M&L for provided reinforced cement concrete pipe 200mm bore class NP-2 with collars laid and jointed with cement all as directed and specifed

M&L for provided reinforced cement concrete pipe 300mm bore class NP-2 with collars laid and jointed with cement all as directed and specifed

M & L for providing bed to drain pipes 150 mm dia in cement concrete (1:3:6) type C2 using 40 mm stone aggregate including packing under and haunching against the sides of pipe after they are laid & tested

Ditto all as per item No 20 above but for 200 mm dia pipes

Ditto all as per item No 20 above but for 300 mm dia pipes

Returning filling in soil including spreading levelling, watering & well ramming in layers n. exe 25cm (Soft /disintregated rock)

Removing excavated material not exc 50mtr and depositing where directed at a level not exc 1.50mtr above the starting points in any type soil

Dismantling of cast iron/RCC pipes jointed in cement mortor and taking out of trenches if required for 100mm pipe (Excavation & earth work will be measured and paid separately)

Dismantling of cast iron/RCC pipes jointed in cement mortor and taking out of trenches if required for 75mm pipe (Excavation & earth work will be measured and paid separately)

M&L for providing cast iron, soil & waste and vent pipes in any length, with or without ears with cement joints fixed to walls using pipes 75 mm bore.

M&L for providing cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls using pipes 100 mm bore.

M&L for providing cast iron soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor using pipes 100 mm bore.

S&F of CI bends (any radius) diminishing pieces or taper,100mm bore in repairs.

S&F of CI bends (any radius) diminishing pieces or taper fitted with oval access doors 100 mm bore in repairs.

S&F of CI bends (any radius) diminishing pieces or taper,75 mm bore in repairs.

S&F of CI bends (any radius) diminishing pieces or taper fitted with oval access doors 75 mm dia, in repairs

S&F of CI branch pieces single (equal or unequal) ordinary or inverted (Spigot or socket type) or with parallel branches 100 mm bore.

S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed by Engineer -in-charge

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed by Engineer -in-charge

S&F for 75mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer -in-charge

S&F for 75mm dia PVC (SWR) junction single(single T) complete all as specified and directed by Engineer -in-charge

S&F for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal complete all as specified and directed by Engineer -in-charge

S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer -in-charge

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer -in-charge

S&F for 110mm dia PVC (SWR) junction single(single T) complete all as specified and directed by Engineer -in-charge

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer -in-charge

S & F precast RCC medium duty manhole covers of size 45cm x 90cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed by engr in charge.

S&F precast RCC medium duty manhole covers of size 60cm x 90cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed by engr in charge.

S & F precast RCC medium duty manhole covers of size 60cm x 60cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed by engr in charge.

S & F precast RCC medium duty manhole covers of size 90cm x 90cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed by engr in charge.

S & F precast RCC medium duty manhole covers of size 30cm x 30cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed by engr in charge.

S & F precast RCC medium duty manhole covers of size 45cm x 60cm x 50 mm thick incl handle , 50 x 50 mm sqaure welded at corner and reinforced with 6 mm dia TMT bar at 150 mm centre to centre on both ways and including cover frame, complete all as specified and directed by engr in charge.

Cutting holes into or through brick/stone walls in any width with core cutter machine or manially built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required ( exc 400 Sqcm but not exc .10 Sqm)

S&F vitreous china wash down Cascade water closet pan (Paddestal pattern) coloured incl 10 Ltr vitreous china valveless syphonic action type flushing cistern low level colour match (EWC with inlet ball valve float and handle incl bracket seat cover and 32 mm dia flushing pipe (Cera and Equivalent) incl taking down old u/s EWC complete.

S & F cast iron work Gd FG-150 unmachined as in brackets,gratings,gully traps, manhole covers etc in articles exc exceeding 5 Kg each.

Ditto all as per item No 52 above but n exc 5 Kg

Road cutting and repair to disturbed road with PCC (1:2:4) type B2 100 m thick over 150 mm hard core of broken stone of gauge n exc 63 mm over rammed earth etc complete all incl cutting of road portion as directed by Engineer-in-charge.

M & L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs set in cement mortar (1:4) complete all as dspecified and as directed by the Engineer-in-Charge. (Note : Reinforcement to be measured and paid separately).

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Vitreous China urinals,half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe (excluding flushing cistern, flush pipe and waste pipe) Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) including all fitting.

S&F for fixing in repairs Vitreous china wash down water closet (Pedestal pattern) , white in colour including fixing bolts, connection to drain and to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as spd and directed by Engg In Charge.

S&F for fixing in repairs vitreous china ware wash basin white, flate back size 550 X 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections of 450mm length complete all as spd and directed by Engg In Charge.

S&F fixing in repairs for vitreous china squatting Pan Orrisa pattern of size 580 x 440mm white with integral foot rests and provn of lime concrete with high level PVC valve less symphonic action type flushing cistern of 10ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32mm dia pipe etc complete all as specified and directed by Engg In Charge.

Dismantling stone slab of any description or thickness in floors, approns etc

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for

M&L for PCC (1:4:8) type D-2 (using 40mm graded aggregates) as in sub base 75mm thick

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx25mm/20 x 20 x25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors

M&L for 30mm to 25mm thick rough dressed sahabad stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in CM (1:3)

Ditto all as per item No 64 above but except sahabad stone

M&L for PCC(1:2:4) type B-1 (20 mm graded aggregate) 75.00 mm thick as in floor with even and smooth finishing without using extra cement complete.

Dismantling interlocking tiles/paver blocks of any specifications and thickness, removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers, pattern as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all manufacturer's instruction complete all as directed by Engineer-in-Charge

M & L for (except paver blocks) 60 mm thick, machine made ,(glossy/rubber moulded type) 1st quality, precast cement concrete interlocking paver blocks / tiles , M-35 (Grade of concrete), of triangular / Zigzag / Haxagone/ I , in shape or shap and design as approved by GE, with grey cement and pigment and conforming to IS 15658-2006, laid over and including a layer of 50 mm thick sand cushion including filling the joints with sand , as in floors/ paths/ pavings etc, complete all as specified and directed. (Note: Old paver blocks in good condition as retrived from respective item herein before shall be used.)

Dismantling mild steel work of any description not otherwise provided for any position complete all specified by Engineer-in-Charge.

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

M&L for PCC (1:3:6) Type C-2 (40mm greaded aggregate) as in foundation filling and mass concrete complete all as specified.

Dismantling fencing wire mesh, any type

S & F galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galvanized mild steel wire , staple or steel pins etc; as directed (Each line of wire to be measured )

Ditto all as per item No 75 above but fixing only

Supply only Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F MS flat iron including fixing clamps or support to chain link fencing posts,wind tie for roof etc complete all as specified and as directed.

S&F MS screw bolts machine made of shank 11 to 15mm screwed both ends length of bolt exc 10cm and not exc 15cm long including fixing to RCC fencing posts with chain link fencing complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any n exc 4kg per sqm

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members n exc 4 kg per sqm

ELIEYAS TRADERS

Tejas Enterprises

Sparkh Electricals & Works

Aim Enterprises

M/S Eagle Electricals And Rewinding Works

Deccan Enterprises

M/S JEELANI ELECTRICALS