Electrification for Oxygen plant at CHC Khaltsi. ( Under Covid -19)

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6/16 Amp

Single pole and neutral

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25mm

Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE at Power Cable of following sizes on surface/surface cable tray,0.50 mtr bleow ground level etc. as required including carriage upto site of work. (Make as per annexure enclosed) 50 Sqmm 3.5 Core Armoured

150 sq.mm 1 core un-Armored

Supply and fixing 20 watt LED tube light fittibg preffered make:-Havells Endura Linear Neo or equivalent make and model Philips/Crompton Greaves.

Supply and fixing of following electrical items suitable for operating on 240/230 volts AC,50 Hz supply including connection etc as required.Exhaust fan 300 mm size (Heavyduty) approved make

Supplying and fixing of LED type 600 mm x 600 mm rexessed mounted fixture that delivers at least 3600 lumans and wattage noy more than 36 watt.The luminars shall have CRCA powder coated body and a higjh efficiency diffuser.The powder factor > 0.09 and a THD < 10% RC 380B LED 36 s - 6500 G4 L 60 W 60 nISU OD of philips,Wipro CRCO 10 RO 38 HP%& GL or equivalent approved make.

Supplying and fixing of 70 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall. Wipro LR02 -501-XXX-57-G2 or equivalent approved make

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia GI pipe ISI marked and 3 meter length, with 40mm x 5mm thick electrode, the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.200 A,36KA,FPMCCB

Change Over Switch 200 Amp (onload)

Fabrication ,supplying ,installation testing and commisssioning of following pannel made out of 2mm thick M.S sheet, wall mounted ,vermin & dust proof ,outdoor type with lockable type hinged doors,duly painted with provision for fixing of 1 no incomer MCCB,MCCB type change over switch -1 No including supply and fixing 2 set of Aluminium Bus bar ,and strip for housing MCB,s 24 Nos , MF Digital Meter and and other allied accessories as required .(Make as per annexure)

M/S TASHI PHUNTSOG GOVT CONTRACTOR