WELCOME MAINTENANCE B/R WORKS REPAIR / REPLACEMENT OF OLD UNSERVICABLE FITTINGS AND DBS REMOVAL OF EARTHING ETC AT A ZONE MD ACCN AND VARIOUS LOCATION UNDER AGE B/R I AND AGE E/M OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' (B/R Works)

Dismantling of plain or corrugated steel sheets any gauge, thickness including Nanital or similar pattern in roof coverings including ridges, hips and valley gutter all as directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws (12-14 x 55 with EPDM seals) complete all as specified and directed.

S & F of thickness 0.56mm Plain, Aluminium sheeting, alloy as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, cover fillets etc including old decayed water proofing treatment of any type all as directed

M&L for 25mm thick cement concrete 1:2:4, type B-0(using 12.5mm graded crushed stone aggregate) as leveling course of roof and finished the surface even and smooth without using extra cement with mixing of liquid water proofing compound as per manufacurere instructions complete all as specified. (Note:- water proofing compound shall be measured and paid seperately.

M&L for surface painted with one coat bituminous primer @ 0.40 Kg per Sqm confirming to IS158, a layer APP based polymeric membrane minimum weighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) laid over a coat of bitumen @ 1.20 kg per sqm on primed surface by torced application side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints and manufacturer's instructions and provided upto a height of 60cm in the parapets by cutting a groove and finished by membrane flashing painted with bitumen @1.2 kg per sqm before application of aluminium paint complete all as specified and directed.

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and as directed.(Pidiproof of Dr.fixit or equivalent)

M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25mm thick as in roof kerbs, coved fillet etc complete all as specified and directed.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar all as ditected.

M&L for brick work with old size fly ash bricks with sub class 'B' built in CM 1:6 straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for old size brickwork, old size fly ash bricks with sub class 'B', straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick on over/soffits of chajjas in cement mortar (1:3) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer and appying with 1mm thick wall care putty complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper preparing surface of wall even and smooth over and appying with 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat white wash complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(But not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over and including 20mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and directed.

M&L for glazed ceramic tiles coloured of size 300x450x7mm thick as in dado, skirting, riser to steps, over and including 10mm plastering in CM (1:4) set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles complete all as specified and as directed.

Taking down steel tubing & connections of 15 mm dia bore complete all as specified and directed.

Ditto all as per item No. 25.00 here-in-before but 20 mm dia bore.

Ditto all as per item No. 25.00 here-in-before but 25 mm dia bore.

Supplying and fixing of CPVC pipes of 16mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling ( patrially concealed/Surface) including all fittings complete all as specified and directed.

Supplying and fixing of CPVC pipes of 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling including all fittingscomplete all as specified and directed.

Supplying and fixing of CPVC pipes of 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings in wall/ceiling including all fittingscomplete all as specified and directed.

S&F in repair 75mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 110mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 75mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) rain water pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F stack clamps made out of 50x5 mm flat iron and 16 mm dia round stays incl bolt and nuts and securing ends of stays to wall or rod for 75 mm bore Cast iron pipe complete all as specified and directed.

S&F stack clamps made out of 50x5 mm flat iron and 16 mm dia round stays incl bolt and nuts and securing ends of stays to wall or rod for 110 mm bore Cast iron pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl bore of pipe 110mm, complete all as specified.

S&F in repair PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified.

S&F in repair PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified.

S&F in repair PVC (SWR) branch pieces, single (single Y), bore of pipe 110mm, complete all as specified.

S&F in repair PVC (SWR) branch pieces, single (single T), bore of pipe 75mm, complete all as specified.

S&F in repair PVC (SWR) branch pieces, single (single T), bore of pipe 110mm, complete all as specified.

S&F 110mm bore PVC (SWR) 'P' or 'S' trap complete all as specified.

S&F 110mm bore PVC (SWR) WC connector with lip ring complete all as specified.

S&F in repair for 75mm bore out let cast floor trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

Dismantling water tanks and removing to site exc 500 and not exc 1000 ltr capacity complete all as specified and as directed.

S&F rotational moulded PVC water storage tank 500 ltr capacity conforming to IS 12701 (1989) cylindrical vertical type multi layered with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed.

S&F 20mm brass ball valve high pressure of with polythene float and flynut complete,screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed as in repair complete all as specified and directed.

S&F bib tap, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F 15mm brass CP mixer for Mixing HOT & COLD water, screwed down for iron pipe and fixed complete all as specified and as directed.

S&F angle stop cock 15mm bore, cast copper alloy with chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed

S&F in repair Vitreous China wash down water closet pan european type (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and also including cast iron S trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve,float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed.

S&F in repairs vitreous china wash hand basin flat back basin white size 510x410mm (Oval shape) excluding taps but including CP waste coupling 32mm bore, wase pipe 610 long etc a pair of MS bracket and cutting for pinning in ends of brackets complete all as specified and directed.

S&F in repairs PVC connection 15mm bore with 2 nos PTMT nuts 60cm long fixed with all as directed.

S&F CP tubular towel rail 600 mm long and 20mm dia icluding brackets etc complete all as specified and as directed.

S&F CP soap dish complete all as specified and as directed.

S&F in repairs 0.5 mm thick stainless steel double bowl Sinks with plugs (size of bowl 750 mm x 750mm x 250mm), washers and wastes; including fixing contilever brackets and connecting union to pipe complete all as specified.

S&F in repair sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed.

Taking down chowkats or frames exc 1.5 and n exc 4.0 Sqm each (with out taking off shutter from the frame) and removing material from the site of work complete all as directed.

S&F pressed steel frame door 105 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F pressed steel frame door 165 X 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete etc complete all as specified and as directed

S&F of 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class HW glazed and skeleton 30mm thick door shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sites of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F in repairs steel windows with side hung shutter including projection type hinghs with steel handle, and steel pag stay, complete with glazing bars, dovetailed or welder all as specified.

S&F in repairs steel windows with side hung shutter including projection type hinghs with steel handle, and steel pag stay, complete without glazing bars, dovetailed or welder all as specified.

S&F in repairs steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 100 mm thick butt hinges, medium weight, mild steel and fixed etc complete all as specified and directed.

S&F 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 150 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 150 mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed.

S&F 4.00 mm thick frosted glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint (any tint) on walls complete all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (any tint) on walls complete all as specified and directed.

M&L for preparation of old pained wooden surfaes of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old pained wooden surfaes of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparation of old pained steel surfaes of any description not exceeding 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

M&L for preparing plastered or unplastered old surface of walls including brooming down or scrapping down with steel wire brushes, smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying one coat of white (Lime) wash on wall complete all as specified and directed.

Ditto all as per item No. 97.00 hee-in -before but applying one coat of white (Lime) wash on ceiling.

Rewriting repainting existing writing letters or figures (block roma, roman, italic, Indian n exc 30 cm height)

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate landings, cover slabs (for man holes etc.) chullah hoods, chajjas, complete all as specified.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 8 mm dia, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Coved filets in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate of redius 75mm shall be provided at the junctions of roof slab and adjoining walls complete all as specified and directed.

S&F 15mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, Cooking Platfarms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S & F for 2nd class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L for 18/19mm thick Pre laminated partilcle board, interior grade, prelaminated one side with decorative choice laminations & otherside balacing white lamination, fixed with screw to timber frame complete all as specified and as directed.

M&L 30mm continuous (pino) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F in repair brass handle 100 mm size complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level complete all as directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L for precast cement concrete Type C-1 (1;3;6) using 20mm graded aggregate as in man hole cover set in CM 1:6

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets and frame work.

Providing and fixing PVC false ceiling consisting of 600 x 600mm, 5mm (+0.25) thick plain ambossed PVC sheet of 600Kg/Cbm Dwensity manufactured by ISO 9001-2008, certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1"x1" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2'x2'(600x600mm) the aluminium frame work is supported from the ceiling with the help of "j" hook and GI wire/6mm MS rods of require sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminium L-section of size 1"x1" (25x25mm) angles etc. complete as specified by manufacturer & drawing and directed by Engr-in-Charge.

SCHEDULE 'A' (E/M Works)

Taking down carefully existing copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed.

M&L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

All as per item No 115.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 115.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

All as per item No 115.00 here-in-before but one light point controlled by 2-way switch all as specified and directed.

All as per item No 115.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

M&L for point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc complete all as specified abd directed.

All as per item No 120.00 here-in-before but one light point controlled by 2-way switch all as specified and directed.

All as per item No 120.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 120.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

S&F Switch piano, flush button type, single pole, one way 6 Amp, 230 volt complete all as specified and directed.

S&F switch socket outlet 5 pin 6 amp, 2 in 1 flush type all as specified and directed.

S&F switch socket outlet combination 2 in 1, 5 amp, flush piano universal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F switch socket outlet multipurpose 6 pin 5/15 amp, flush type controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and as directed.

S&F ceiling fan regulator electronic stepping type and socket type, SP 230 Volts including necessary electric connection complete all as specified and directed.

S&F ceiling fan regulator electronic stepping type and switch type, SP 230 Volts including necessary electric connection complete all as specified and directed.

S&F in replacement of LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete all as specified and directed . Make Havells cat part no. LUMILINEBS18WLED865SPWH OR EQUIVALENT MODEL OF CG /Philips.

S&F in replacement LED Tube Light luminaries with high performance LED with driver 1 x 9W (2 Feet long, Cool day/Warm white) complete all as specified and directed. (Make: Havells CAT PART NO.LUMILINEBS9WLED865SPCWH or equivalent model of Philips/CG)

S&F Lamp holder , PVC / Polycarbonate type with back plate suitable for B22 lamp including 9Watt LED Bulb complete all as specified and directed. (Make: Havells/ Philips / Bajaj /Surya)

Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 12 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 8 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 4 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, single door single pole & Neutral 2 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

Refixing of MCBs any type and size complete all as directed.

Taking down of old Submain wiring any size any type including batten/ conduit/ casing at any indicated situation and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and directed.

S&F MCB single pole and neutral, 415 volts, 40-63 Amps, breaking capacity 10KA complete all as specified and directed. Make:- Legrand /Havells/L&T/ ABB

S&F MCB single pole and neutral 240 volts, 06 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed. Make:- Legrand /Havells/L&T/ ABB

S&F MCB single pole 240 volts, 06 to 32 Amps, breaking capacity 10KA, 240 Volts 'C' curve all as specified and directed. Make:- Legrand /Havells/L&T/ ABB

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6 sqmm as earth continuity conductor drawn through PVC conduit 25mm bore ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor drawn through PVC conduit 25mm bore ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

S&F in replacement MS Box in concealed of any type and any size complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 300 x 250 x 3 mm complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 250 x 150 x 3 mm complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 100 x 100 x 3 mm complete all as specified and directed.

S&F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 250 x 200 x 50 mm deep.

S&F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 200 x 150 x 50 mm deep.

S&F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep.

S&F in replacement single pole and neutral enclosure with a two pin and earth plug socket with one single pole one MCB of 16/25 amp complete all as specified and directed.

S&F switch piano flush button, 5/6 amps, single pole, two way 230 volts complete all as specified and directed.

S&F bell push flush type 5 ampscomplete all as directed.

S&F bell, AC, 230 volts, single pole complete all as directed.

Refixing of MCB DB any type and size complete all as directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 99221.00 (refer Tender Srl Page No 46). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

J T ENTERPRISE

SRI A B SEN

M/S DUTTA CONSTRUCTION CO

M/S Joy Construction

GURUNG CONSTRUCTION

M/S R. K. INDUSTRIES

PRADIP KUMAR BOSE