SMART PERIODICAL AND CONNECTED MISC B/R WORKS AT PINTO PARK AREA AND CAMP AREA AT AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT-10

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 12 mm thick rendering using polymer modified ready-mix cement based mortar conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio (1:3) as per manufacturer's instruction on brick or concrete surfaces of walls including finishing surface even and fair without using extra cement complete all as specified and as directed. Make : Ultratech/Dr. Fixit/Fosroc

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering using polymer modified ready-mix cement based mortar conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio (1:4) as per manufacturer's instruction on brick or concrete surfaces of walls including finishing surface even and fair without using extra cement complete including necessary scaffolding up to (G+3 storey) complete all as specified and as directed. Make:- Ultratech/Dr. Fixit/Fosroc.

M&L for washed stone grit plaster (of any colour/ pattern) on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 coloured stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engr-in-Charge. Note :- Payment for providing grooves shall be measured and paid seperately.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

M & L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, slab, chhajja, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix welded wire mesh of size 100 x 100 mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar 1:3, average 30mm to 50mm thickness and thereafter rendering 10 mm thick plaster in cement mortar (1:3), mixed with water proofing compound @2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour for necessary scaffolding and formwork (G+3 storeys) and safety arrangement for guniting work complete all as specified and as directed. Note:- The finish of the surfaces shall be matched with the existing surface. WPC shall be measured & paid separately under respective item as supply only.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending separately for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Descrciption all as per ser Item No. 8.00 above but 5 to 10 mm dia TMT bars as in stirrup complete all as specified and as directed.

Supply only Integral Water Proofing compound complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.

M&L for preparing old surfaces on ceilings including brooming down, mechanically scraping down and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over one coat of alkalic resistant primer over 3mm thick (average) cement base wall care putty complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from external surfaces of walls & ceilings by mechanicaly and washing, rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of (1:3) to obtain smooth regular/even finish using sand paper and incuding applying two coats of oil bound distemper over one coat of alkalic resistant primer over 3 mm average thickness cement base wall care putty on wall etc. complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plaster surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43 ltr/10sqm over a coat of exterior primer 2.20 kg/sqm over 3mm thick (average) cement base wall care putty complete all as specified and as directed.

M&L for complete removal of existing surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43ltr/10sqm over a coat of exterior primer 2.20kg/sqm over 3 mm thick (average) wall care putty complete all as specified and as directed.

M&L for prepration of old decorated plastered surfaces of walls and ceilings, removal of nails etc & filling cracks/hole by applying cement base wall care putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of oil bound distemper white or coloured complete all as specified and as directed.

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls and ceilings by removal of nails etc & filling cracks/hole with putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil bound distemper white or coloured by roller complete all as specified and as directed.

M&L for applying 3 mm thick (average) cement base wall care putty on wall complete all as specified and as directed.

M&L for preparation of plastered or un plastered old decorated surfaces of walls, removal of nails etc & filling cracks/hole by applying cement base wall care putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of exterior emulsion paint 100% acrylic of approved white or coloured complete all as specified and as directed. Note:- The work shall be carried out upto four storey building. Necessary scafolding upto four storey bldg shall be deemed to be included in unit rates.

M&L for preparation of plastered or un plastered old decorated surfaces of walls, removal of nails etc & filling cracks/hole by applying cement base wall care putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion paint 100% acrylic of approved white or coloured complete all as specified and as directed. Note:- The work shall be carried out upto four storey building. Necessary scafolding upto four storey bldg shall be deemed to be included in unit rates.

M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for writing stops, commas, short lines, dashes, hypens, brackets etc using synthetic enamel paint complete all as specified and as directed.

Disconnecting existing water tank of any description n exc 500 litres capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position with and including 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod complete all as specified and directed by Engineer-in-charge.

Disconnecting existing water tank of any description exc 500 litres but n exc 1000 litres capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position with and including 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod complete all as specified and directed by Engineer-in-charge.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty / wooden beads in square or rectangular in section n exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking down old steel wire cloth complete all as specified and as directed.

S&F figured glass pin head type 4mm thick n exc 0.5 sqm each and glazing with oil putty, including hacking out old broken glass complete all as specified and as directed.

M&L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages:- Stage 1: Providing 15mm thick plaster in CM (1:3) mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM (1:3) mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :- (i) Mode of measurement shall be actual area treated (floor and adjoining walls).

Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n. exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces with and including over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300x200)mm x7mm thick/ (450x300)mm x7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match with and including over 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.

Taking down AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Taking down CI pipes of 75/80mm dia of any description including all fittings complete all as specified and as directed.

Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.

S&F PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes complete all as specified and as directed.

S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to floor/ walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.

S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls/floor etc with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and directed.

S&F CI 100mm bends with door complete all as specified and as directed.

S&F cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) of size 100 mm including jointing with solvent cement complete all as specified and as directed.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and as directed.

Taking up or down 15 to 25 mm steel tubing and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

S&F tubes, medium gade 15mm dia, galvanized with all fittings and fixed complete to walls and ceiling or laid in foors. (concealed type) complete all as specified and as directed.

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for GI tubing, 25mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Dismantling water tanks exc 250 & n exc 500 capacity in litres and removing to store complete all as specified and as directed.

S&F 500 ltr rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top), white colour, hoisted and fixed in position complete all as specified and as directed.

S&F ball brass valves, 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-Charge.

S&F gunmetal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F gunmetal globe or gate valves, 25 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless syphonic action type flushing cistern (Economy dual flush) low level, white, with inlet, ball valve, float and handle including brackets and brass C.P. flush pipe long band complete all as specified and as directed.

S&F in repair WC Orissa pattern white with integral foot rest (580x440)mm including trap set, PCC bed and making good disturbed floor connecting to flush pipe complete all as specified and as directed.

S&F in repairs 15 mm dia long body bib taps fancy type cast copper alloy chromium plated handle, screwed down, screwed for iron pipe or for brass fernile complete all as specified and as directed.

S& F in repairs 15 mm dia pillar taps swan neck fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore CP Angular valve ( fancy type), screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs 15mm bore concealed stop cock long shank and long threading chromium plated of screwed down to iron pipes, high pressure complete all as specified and as directed.

S&F CI 100mm single branch piece with door complete all as specified and as directed.

S&F for CI 75mm bends with door complete all as specified and as directed.

S&F for cast iron cowls 100 mm size complete all as specified and as directed.

Supply and Fixing in repairs, salt glazed stone ware gulley traps (150x150)mm size square mouthed type ‘P’ including CI cover complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F 1mm thick stainless steel plate rack of overall size 600 mmx900 mm and weight not less than 6 Kgs as approved complete all as specified and directed.

S&F in repair 25 mm dia aluminium Drapery rod, coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and as directed.

Please Enable Macros to View BoQ information