SPL REPAIR TO BLDG NO P-118, P-02 AND BCD-23 (OR BATHROOM) UNDER AGE B/R I, UNDER GE JHANSI

Amount

Demolition of cement concrete including terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar & removing rubbish from site complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection and path laid in panels, not more than 3 RM in length or change in direction, laid to slope 1:30 including forming joints 10mm wide and duly filled with mastic bitumen (One part bitumen mixed with three parts of sand) surface, complete all as specified and as directed. Note : Quoted rates are deemed to be inclusive of jointing material against form work and joint fillings.)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing complete rubbish off the premises/site, complete all as specified and directed.

M&L for Non skid ceramic colored tiles 7-8 mm thick (square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for ceramic colour tiles in vertical surface of size 350 X 250 x 6-7mm / 450x300x6-7 mm thick, joint-less type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed.

M&L for Vitrified colour tiles 8-10 mm thick (square/rectangular) area of each tile not exceeding 0.`38 Sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:6 over brushing neat cement slurry @ 3Kg/Sqm complete all as speciefied and directed.

All as per item number 06 here-in-above but on vertical surfaces such as skirting / dado over and including 10mm thick CM rendering (backing coat) in CM 1:4, complete all as specified and as directed.

Dismantling stone slabs of any description or thickness laid, bedded and pointed in any mortar as in floors, aprons & removing rubbish from site complete all as specified and directed.

Material & Labour for machine cut kota stone slab flooring 20-25mm thick (of size 550x550mm) over cement screed base laid and jointed with grey cement slurry mixed with colouring pigment to match the colour or shade of the stone slab including rubbing and polishing (mirror) over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Material & Labour for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the stone slab including rubbing and polishing including 10 mm thick rendering as backing coat in CM 1:4 complete all as specified and directed. Note : Kota stone in Step will be placed in single piece with groove lines at edge.

Material & Labour 18-20 mm thick granite stone slab of any type or shade, tabled rubbed, machine cut, duly grinding, polishing, moulding on outer exposed edge on all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking plat forms and like in laid over & including 15mm thick cement sand mortar (1:4), including pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the colour or shade of stone slab, complete all specified and directed.

Material & Labour 18-20 mm thick granite stone slab (of any type) machine cut, fixed as in skirting/ dado/riser laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding & polishing complete including 10 mm thick backing coat in CM 1:4 complete all as specified & directed.

Dismantling timber scantling 40 Sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.

Material & Labour 18-19 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class-A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk Steel screws, including dismantling of old boarding, cupborad any description, fixed in any position including fittings complete all as per direction of GE. Note : stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately)

Material & laour for 2mm thick 18 to 25 mm wide PVC edge binding tape of approved quality for cupboard / wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc complete all as per direction of GE.

S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flap (when open) is 30mm fixed with steel screws complete all as specified & directed.

Supply & Fixing steel knob drawer/ cup board shutter handles, projection drop (50mm to 65mm) on screwed fancy type complete all as specified & directed.

Supply & Fixing 100 mm hasp and staple, safety type, aluminium anodised with hinge pin hinge including bolt to hinge plate and fixed with steel screw complete all as specified and directed.

Supply & Fixing stainless steel magnetic catcher fancy type for kitchen cabinet / drawer complete all as specified and directed.

S&F Rubber bush (door seal) of 25mm wide (length of door 0.9 to 1.2 RM each) fixed to door with nails or screws complete all as specified & directed

M&L for 10 mm thick rendering in CM (1:6) on fair faces of brick work/concrete surfaces finish the surface even & fair (without using extra cement) including taking down cement plaster on brick or stone wall, dado and skirting etc including racking out joints hacking for key scrubbing down with water & removingrubbish from site complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 (mixed with WPC) on fair faces of brick work/ concrete surfaces, finished even & fair (without using extra cement) including taking down old cement plaster on brick or stone wall, dado and skirting etc including racking out joints hacking for key scrubbing down with water & removing rubish from site complete all as specified & directed.

M&L for 10 mm thick rendering in CM (1:3) on fair faces of concrete surfaces in ceiling finished even & smooth (without using extra cement) including taking down old cement plaster on brick or stone wall, dado and skirting etc including racking out joints hacking for key scrubbing down with water including removing rubish from site complete all as specified & directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper (Acrylic) over one coat of cement primer over 1 mm thick wall care putty, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS: 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof) of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over one mm thick wall care putty complete all as specified & directed. Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer's drums with seal intact.

M&L for preparation of existing surface of walls by complete removal of existing treatment and applying one mm thick wall care putty & two coats of Oil bound distemper (Acrylic) with roller complete smooth finish of surfaces complete all as specified & directed.

M&L for preparation of old steel or iron surfaces of any description, not otherwise described width over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed

M&L for preparation of new steel or iron surfaces of any description, not otherwise described width over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed

M&L for preparation of old painted surfaces of wood of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed

Taking down chowkhats with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exceeding half brick but not exceeding one brick thick wall for inserting hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as specified & directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm & not exceeding 4 Sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exceeding half brick but not exceeding one brick thick wall for inserting hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as specified & directed.

Taking down shutters of any description not exceeding 01 Sqm each, complete all as specified and directed.

Supply & Fixing for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class-A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of GE. (MS hold fast/ lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames ±5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.

Supply & Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick pre-laminated colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed.

Supply & Fixing 30 mm thick Factory made extruded WPC (Wood Polymer Composite) solid moulded flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class-A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as per direction of GE.

M&L 30mm thick factory made solid WPC (Wood plastic composit) moulded wire gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire mesh shall be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fire again of the shall be as per manufacture instruction complete all as specified & directed.

S &F Factory Made Solid PVC Moulded Door Shutter, 28-30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelaminated colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply & Fixing powder coated aluminium sliding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium setion not less than 0.55Kg/RM of three track frame, including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 4-5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement, aluminium handles, including aluminium grill of aperature size 50x50mm x 4mm dia complete all as specified & directed.

M&L for powder coated aluminium partition wall, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/RM including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, steel screws complete all as directed.

Material & Labour Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars dovetailed and welded joints complete all as specified as directed. Note :- The sheet Glass / wire gauze shall be measured & paid separately.

Material & Labour for Framed work (Fe-290W, Gde 150) as in doors frame or gates fabricated with angle or other section with gusset plates, rails, braces complete drilled for fixing of steel sheeting or other covering materials Doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges weld etc complete all as specified and directed .

Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tacks or galvanized steel wire staples complete all as specified and directed.

Supply & Fixing aluminium alloy anodized sliding door bolt 300mm (aldrop bolt) length with hasp staple and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed with complete all as specified and directed.

Supply & Fixing aluminium alloy anodized sliding door bolt 200mm (aldrop bolt) length with hasp staple and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed with complete all as specified and directed.

Supply & Fixing 100 mm size butt hinges, extruded aluminum alloy with galvanized steel pin type B-21 anodized fixed with steel screw complete all as specified and directed.

Supply & Fixed 150mm long barrel tower bolt aluminum anodized extruded section fixed with steel screw complete all as specified and directed.

Supply & Fixing 150mm aluminum handle cast type anodized fixed with steel screw complete all as specified & directed.

Supply & Fixing mild steel ordinary rat tail rod pattern springs of size 300mm including roller & roller plate complete all as specified and directed.

Supply & Fixing aluminium door stopper of size 140 mm aluminium body and tongue anodized with hard drawn steel spring fixed in door shutter with steel srew complete all as specified and directed.

Supply & Fixing in repair/replacement stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and including SS end caps / knobs and SS wall mounting brackets fixed with steel screw complete all as specified and directed.

Supply & Fixng of ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type-A in any length single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and including rubber tighten gaskets, ringfit sockets etc complete pipe duly fixed to wall with MS clamps, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified & directed.

Supply & Fixng of ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type-A in any length single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and including rubber tighten gaskets, ringfit sockets etc complete pipes laid in trenches, including taking down of old rain / waste water pipes including all fittings any size and pattern complete all as specified & directed.

Supply & Fixng of ringfit PVC (SWR) pipe of 75mm nominal dia size, wall thickness of 3.5 mm, Type-A in any length single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and including rubber tighten gaskets, ringfit sockets etc complete pipe duly fixed to wall with MS clamps, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified & directed.

Supply & Fixng of ringfit PVC (SWR) pipe of 75mm nominal dia size, wall thickness of 3.5 mm, Type-A in any length single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and including rubber tighten gaskets, ringfit sockets etc complete pipes laid in trenches, including taking down of old rain / waste water pipes including all fittings any size and pattern complete all as specified & directed.

Supply & Fixing 75 mm bore PVC (SWR) bends of any radius jointed with rubber adhesive complete all as specified and directed.

Supply & Fixing 110 mm bore PVC (SWR) bends of any radius jointed with rubber adhesive complete all as specified and directed.

Supply & Fixing 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

Supply & Fixing 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

Supply & Fixing PVC (SWR) vent cowl 75mm bore jointing to waste pipe, complete all as specified and directed.

Supply & Fixing PVC (SWR) vent cowl 75mm bore jointing to waste pipe, complete all as specified and directed.

Supply & Fixing PVC floor trap of 75 mm outlet, jointing to waste pipe with rubber adhesive complete all as specified and directed.

M&L for PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement or adhesive grouted in PCC 1:2:4 complete all as specified & directed.

Supply & Fixing 15 mm bore Galvanized Steel water tubing medium grade fixed to walls and ceilings or laid in floors with steel clamp or hooks concealed or open including cutting of grooves & making good including taking up or down with connections and fittings complete all as specified and directed.

Supply & Fixing 20 mm bore Galvanized Steel water tubing medium grade fixed to walls and ceilings or laid in floors with steel clamp or hooks concealed or open including cutting of grooves & making good including taking up or down with connections and fittings complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and including disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs & removing from site complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and including disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs & removing from site complete all as specified and directed.

S&F of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in GI pipes complete all as specified and directed.

S&F of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) complete all as specified & directed.

Supply & Fixing kitchen sinks with drainage board made of stainless steel one mm thick kitchen or laboratory with plugs, washers and waste couplings; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

Supply & Fixing sinks made of stainless steel one mm thick kitchen or laboratory with plugs, washers and waste couplings; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

Supply & Fixing in replacement of stainless steel kitchen plate rack made out of 1 mm thick steel sheet of size 765x920mm and 220mm deep, weight not less than 7 Kg each fixed or hang on walls with suitable size nut bolts complete all as specified and directed.

Supply & Fixing in replacement of pillar tap swan neck 15 mm dia cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with long screwed shanks and fly-nuts complete all specified and directed.

Supply & Fixing in repair CP wash basin mixer swan neck type with out popup waste system, 15 mm dia with flange made of cast copper alloy complete all as specified and directed.

Supply & Fixing in replacement of angle valve / stop cock with long shank and cup (concealed type) 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with capstan head handle, screwed both ends for iron pipe / unions complete all as specified and directed.

Supply & Fixing in replacement of overhead shower rose of dia 125 mm round shape single flow, brass chrome plated fancy type, with or without swivel type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type complete all specified and directed.

Supply & Fixing in replair long body bib tap/cock 15 mm dia with wall flange made of cast copper alloy, chromium plated complete all specified & directed.

Supply & Fixing in replair of angle stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all specified & directed.

Supply & Fixing SS grating of squre or round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and including fixing with adhesive or cement mortar to floor/nahani traps complete all specified & directed.

Supply & Fixing in repair towel rail 600 mm long D type between flange and wall bracket made of cast copper alloy chromium plated complete all specified & directed.

Supply & Fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600mm long complete all as specified & directed.

Supply & Fixing in repair PVC multi-purpose cabinet mirror with front openable door of overall size 350 x 450 mm fixed or hang on walls with steel screws complete all as specified and directed.

Supply & Fixing in repair of Brass CP connection 15mm dia and 450mm long with 2 Nos brass check nuts with washers for geyser, complete all as specified & directed.

Supply & Fixing in replacement of PVC waste pipe 32 mm dia 750 mm long for wash hand basin or for kitchen sink complete all as specified and directed.

Supply & Fixing in replacement of PVC connection 600 x 15mm dia PTMT (PVC) complete all as specified & directed.

Supply & Fixing in replacement 10 ltr capacity PVC valve less symphonic action type flushing cistern, white colour, with inlet ball valve, float and handle with and including fixing with steel screws or MS wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall complete all as specified and directed.

Supply & Fixing table top white colour Vitreous China wash hand basin of oval type size not less than 500mm bowl type, 32mm CP brass waste coupling, CP brass pillar cock swan neck type 15mm size having long neck and Aerator, CP brass bottle trap 32 mm size, extension pipes, wall flanges and concealed GI clamps complete including 18mm granite stone of black colour, making necessary holes and other cutting in the counter top and fixing the wash hand basin, pillar cock rigidily including making good the walls wherever required complete all as specified and directed by GE.

Supply & Fixing in replacement ceramic One Piece Water Closet with in built flushing cistern including slow falling seat cover with floor mounted with all necessary fittings of suitable size complete all as approved by the GE complete all as directed.

Supply & Fixing in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rest water closet including flush pipe P Trap and connecting cone but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as specified & directed.

Supply & Fixing in repair Vitreous China wash down water closet pan (pedestal pattern) EWC whilte colour including provide PVC white colour seat cover & SS Jet system fixed on EWC complete all as specified & directed.

Supply & Fixing in repair Vitreous China urinals half turn bowl type (flat back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long steel screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified & directed.

Supply & Fixing in replacement of 1st quality vitreous china wash hand basin, white flat back of size 550x400mm complete including necessary cutting for and pinning in ends of brackets with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size complete all as specified and directed.

Supply & Fixing in replacement of corner glass shelf 300 mm with Chromium plated bracket guard and railing and fixed wit hsteel screws accessories, complete all as specified & directed.

M&L for RCC 1:2:4 (Nominal Mix) type B-1 using 20 mm crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete including demolition of old RCC work & removing from site complete all as specified & directed.

M&L for mild steel deformed TMT bars 6-10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition of cement concrete of any description and in any position inside of WC’s or Bathroom etc in sunken portion area above ground floor, removing demolished material completely removed and old waste pipe from sunken portion and cleaning the sides & bottom surface of sunken floor with wire brush, complete all as specified & directed.

Material & Labour PCC 1:3:6 type C-2 using 40mm crushed stone aggregate as in mass filling in sunken portion of toilets & grouting / fixing of fencing posts complete all as specified and directed.

Mateial & Labour for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm crushed stone aggregate as in padding / levelling course / roof kerbs or bedding below tiles etc and roof kerbs mixed with water proofing compound finished even and fair with proper slope as prepratory works to water proofing treatment complete all as specified and directed. Note :-WPC measured and paid seperately

Material & Labour for 15 mm thick rendering or plastering in CM 1:3 along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for bitumen blown 80/100 grade applied hot, two coats on plastered surfaces of any description at the rate of 1.5 kg per sqm per coat inside bathroom sunken portion complete all as specified and directed.

M&L for Polythene film black colour having 50 micron thick laid in floor complete all as specified and directed.

M&L for 50mm dia GI pipe light grade as in spout to drain out if any leakage occures in the sunken portion complete all as specified & directed.

Supply only liquid water proofing compound mixed in CM as per manufacturer instruction (200 gm per bag of 50 Kg cement) complete all as specified and directed.

Supply & fixing 100 mm long stainless steel handle fancy type fixed with SS screws complete all as directed.

Supply & fixing stainless steel soft closing heavy type telescopic drawer channels of approved make long fixed with steel screws complete all as directed.

Supply & fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen food grain basket, Multi-purpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel screws & telescopic channel as per directed. Note : For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement sand mortar 1:6 including demolition of old brick work in any postion & removing rubish from site complete all as specified & directed.

M&L for Brick work with fly ash bricks, straight or curved on plan to any radius radius in half brick thick wall built in cement mortar 1:4 complete all as specified & directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS: 15658-2006 of 60mm thickness, M-35 Grade with colored pigment including laid over 50 mm thick (average) sand coushioing bed complete all as specified & directed.

Surface excavation not excavation (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil & reubish removed from site complete all as specified & directed.

M&L Hard core (crushed stone) of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified & directed.

Excavation in post holes (for similar holes) each not exceeding 0.5 Cum getting out, returning filling in and ramming earth or broken rubbed mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface in hard/dense soil complete all as specified & directed.

Supply & Fixing mild steel work as in tubular trusses, vertical post, struts, purlins including special hollow shaped sections washer etc complete using ERW including induction butt welded tubes conforming to IS: 1161-1998 complete all as specified & directed.

Supply & Fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified & directed.

Supply & Fixing Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified & directed.

M&L of water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3Kg/Sqm as per manufacturer’s Instructions with torch application joints complete including taking down old treatment any type & removing robish from site complete all as specified & directed with following course of action / description below:-

(a) 10 mm thick plaster in CM 1:4 with WPC will be applied over the roof slab when concrete is green. After the plaster is cured the roof will be tested for water tightness by ponding test with water for seven days for any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/Sqcm using cement based cement grout. After the surface is repair the slab will be tested for water tightness again before proceeding with further treatment. (b) the surface of roof, parapet and gutters, drain mouths over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting For cast iron drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimney stacks and other similar situation to ease up about corners.

(c) Bitumious based primer confiorming to IS: 3384 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly dried impregnated. (d) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer's Instruction. The overlap while toching shall be 100mm (minimum) in longitudinal & transverse direction both. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. (e) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.

Taking down old damaged copper / aluminium point wiring (light, fan, socket or power point) complete, including fixture and fittings such as switches, ceiling rose, pendant, regulator, socket, light fitting etc and removing materials from site for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Material & Labour point wiring for modular fittings complete with 1.5 Sqmm FRLSH Insulated, unsheathed, multi-stranded 1100 Volts grade copper conductor cable / wires single core conforming to IS: 694 along with two run of 1.5 Sqmm FRLSH insulated copper conductor cable & one run green colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS: 9537 (Pt-III) and its all necessary accessories / junction boxes / inspection covers of suitable size but not less than 20mm (OD), concealed in wall / floor including provision of modular cover plates with frames and 1.5 Sqmm PVC insulated unsheathed stranded copper conductor (FRLSH) cable for common earth and connecting to earth dolly complete all as specified & directed. Note :- Cutting / chasing in walls & making good shall be included in Quoted rates.

One light point / ceiling fan / exhaust fan point controlled by one switch

One Bell point controlled by one switch

One 6Amp socket point controlled by one switch on Independent board

One 6Amp socket point controlled by one switch on same board

One light point controlled by two 2 - way switches

Ditto all as per srl item No. 119 here-in-before but with 2.5 Sqmm FRLSH copper wire with 2.5 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board ----- ditto --- complete all as specifeid & directed.

M&L for submain wiring alongwith earth wire 2 runs x 6 Sqmm + 1 run x 6 Sqmm with FRLSH Insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit ISI Marked conforming to IS: 9537 (Pt-III) and its all accessories/junction boxes/ inspection covers of suitable size but not less than 20mm concealed in wall/ floor etc including taking down old submain wiring alongwith conduit complete all as specified & directed. Note : Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

Ditto all as per srl item No. 121 here-in-above but 2 runs X 2.5 Sqmm + 1 run X 2.5 Sqmm copper conductor FRLSH wire complete all as specified & directed. Note : Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

Supply & fixing Modular switch 1 way 6Amp 1 module 240Volt complete all as specified and directed.

Supply & fixing Modular switch 1 way 16Amp 1 module 240Volt complete all as specified and directed.

Supply & fixing Modular fan regulator electronic type in 5 steps, 240Volt complete all as specified and directed.

Supply & fixing Modular Socket 6Amp, 2/3 pin combined 2 module 240Volt complete all as specified and directed.

Supply & fixing Modular Socket 16Amp, 2/3 pin combined 2 module 240Volt complete all as specified and directed.

Supply & fixing blanking plate 1 module for modular type fixed in modular blank space complete all as specified and directed.

Supply & Fixing electric bell of DINGDONG type 240 volts, single pole, marked with valid CML and making all necessary electric connections complete all as specified and directed.

Supply & fixing Modular switch 2 way 10Amp 1 module 240Volt complete all as specified and directed.

Supply & Fixing Lamp holder angle type with metal ring, PVC/Polycarbonate body modular type with & including 9 Watt LED bulb complete all as specified and directed.

Supply & Fixing Ceiling rose, three terminals, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed.

Supply & fixing 10 watt LED light decorative type wall light fittings/fixture mirror type made up of Poly carbonate body and including necessary electric connecting with 2 core twisted flexible copper conductor cable of suitable size from celling rose complete all as specified and directed.

Supply & fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230Volt, 50HZ, RPM 1200, Copper winding of sweep 250 mm including connection with 1.5 Sqmm three core copper conductor wire from ceiling rose to exhaust fan upto 1 RM length including fixing on ventilator complete all as specified and directed.

Supply & fixing of exhaust fan with steel body 300mm sweep with blade with louvers shutter, voltage 230Volt, 50HZ, RPM 1200, Copper winding including connection with 1.5 Sqmm, three core copper conductor wire from ceiling rose to exhaust fan upto 1 RM length including fixing on ventilator complete all as specified and directed.

S&F LED Tube light fitting 20 watt batten type 230Volt efficiency 120 Lumens per watt, colour temperature 6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CPRI-80, IP Rating, IP-20, THDV with in 5 % and THDi (8-10%) and integrated Electronic driver complete with all accessories internally Pre-wired and including connecting with 2 Core twisted flexible copper conductor cable of suitable size from celling rose to light fitings complete all as specified and directed. Notes:- (i) The rate of two core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account. (ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase. (iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits.

S&F LED Tube light fitting batten type 10Watt, 230Volt efficiency 120 Lumens per watt, colour temperature 6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) complete with all accessories internally Pre-wired and including connecting Up with 3 Core twisted flexible copper conductor cable of suitable size from celling rose all as specified and directed. Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account. (ii) Contractor shall be bound for warranty for replacement of LED light fittings for the period of 2 years from the date of completion. (iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits.

Supply & fixing of LED bulkhead luminaire 10Watt in die-cast PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP-55 degree of protection complete all as specified and directed.

Supply & fixing LED building security light fitting 35 watts, Luman efficacy of LED 140 lm/W, PF>0.95 THD<10%, colour temperature 6500K CRI > 7, system luman not less then 2600 lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lence with toughed glass having bottom separate driver compartment with IP-65 protection and impact resistant of IK-07 complete with all accessories previewed complete including mounting bracket of GI Pipe 40mm inner dia light grade of reqd length (upto 600mm) and shape including bending, forging or welding and clamping with suitable bolts and nuts with washers, including connecting with PVC insulated multi-standered cooper conductor flexible cable of size 1 Sqmm 3 core form celling rose to light fittings complete all as specified and directed. Notes:- (i) The rate of two core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account. (ii) Warranty for replacement of each LED light fitting shall not be less than 2 years from the date of purchase. (iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits.

Supply & fixing Electric Water Heater storage type, vertical, 25 Ltrs capacity 5 Star rated, with heating element, PUF insulation, multifunction safety valve, adjustable knob for temperature setting and steel inner tank and outer body suitable for operating on 230Volt, 50 Hz, single phase AC supply including hot & cold water PVC connection and mounting on wall with suitable size & No. of anchor bolts or fasteners including taking out old geyser & depositing to EM store yard complete all as specified and directed.

Supply & fixin modular MCB protected plug and socket board in sheet metal enclosure with 20Amp rated mini MCB and 20Amp rated 3 pin plug, 240 Volt, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

Supply & Fixing ceiling fans complete with blades, down rods, (with remote) and accessories, 230 Volt, 1200 mm sweep Min air delivery 210 CFM with service value more than 6.00 BEE Five star rated with brushless direct current motor (BLDC) including taking out old fan & depositing to store yard of AGE EM complete all as specified and directed.

Supply & fixing MCB distribution board, VTPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP-43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, finshed with wall care putty and paint to match with the existing surface complete all as specified and directed. Note : MCBs shall be measured and paid separately.

Taking down old U/S distribution board any type alongwith MCBs and Supply & Fixing MCB distribution board, SPN 8 way 230 Volt in sheet steel powder painted enclosure double door type with IP-43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, finshed with wall putty and paint to match with the existing surface complete all as specified and directed. Note : MCBs shall be measured and paid separately.

Dittoo all as per serial item No. 144 here-in-before but SPN 4 way, 230 Volt single phase AC ditto ---- complete all as specifeid & directed. Note : MCBs shall be measured and paid separately.

S&F MCCB Four Pole 63Amp, with breaking capacity 16 KA, adjustable thermal and fixed magnetic type, ics=100%icu, 415 volt including connection with suitable size copper lugs complete all as specified and directed.

Supply & Fixing MCB SPN 40-63 Amp, 240 Volt with breaking capacity 10 KA, 'C' series complete all as specified and directed.

Supply & Fixing MCB SP 6-32 Amp, 240 Volt with breaking capacity 10 KA, 'C' series complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for laying of cable or GI Pipe and getting out in soft loose soil complete all as specified and directed.

Returning, filling in, including leveling, watering and well ramming in layers not exceeding 25 cm depth complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply & laying or fixing or passing through pipes 1100 volts grade heavy duty XLPE cable with Insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed 10 Sq mm 2 core in service connections as per IS: 7098 (Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down old existing service cable of any type & description complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends for protection of LT cable grade 1100 volts complete all as specified and directed.

Taking down old U/S damaged earthing and M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connecting to GI wire 4 mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board / earthing test point complete all as shown in electircal plate No. 3 of SSR Part-I (2009) and testing on completion complete all as specified and directed. Note :- Unit rate quoted by bidder shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, type C-1 pit, 40mm thick RCC 1:2:4 mix type B-1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe 20 mm dia protection pipe, wire mesh, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

ADARSH ENTERPRISES (BID ID -3460615)

m/s ramesh saran agarwal (BID ID -3460176)

FTH TRADERS (BID ID -3460225)

M/S SHIVA TRADERS (BID ID -3460795)

HARNAM SINGH ANIL SINGH (BID ID -3460648)

M/s Jagdish Chandra Arora (BID ID -3459670)

S GOURAV PRAKASH ENTERPRISES (BID ID -3460748)