Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹31.7 LAccepted-AOC | L-1 | Accepted-AOC Being lowest bidder | |
| 2 | L-2₹35.1 L+₹3.4 L (10.6%)Rejected-Finance | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹35.4 L+₹3.7 L (11.8%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹37.9 L+₹6.2 L (19.5%)Rejected-Finance PATOLI BRAHMANA WARD NO 02 PO MUTHI TEH DISTT JAMMU J K PIN 181205 | JAMMU | JAMMU AND KASHMIR | 181205 | L-4 | Rejected-Finance Other than lowest bidder | |
| 5 | L-5₹39.4 L+₹7.7 L (24.2%)Rejected-Finance 146 D POCKET B MAYUR VIHAR PHASE II DELHI 110091 EAST DELHI 110091 | EAST | DELHI | 110091 | L-5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | AKSHAY CONSTRUCTION COMPANY L5 | M/s Koul & Sons L2 | M/S VERMA ENTERPRISES L4 | Nitika electricals and engineers works L3 | M/S LANGER CONSTRUCTION CO L1 | kerni electricals L8 | Shri Karshni Builders L7 | SHARMA CONSTRUCTION COMPANY L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down shutters of any description not exceeding 1 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed. | 50 | Each | 75 ₹3,750 | 35 ₹1,750 | 50 ₹2,500 | 100 ₹5,000 | 100 ₹5,000 | 20 ₹1,000 Lowest | 50 ₹2,500 | 50 ₹2,500 |
| 2.00 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and as directed. | 130 | Each | 75 ₹9,750 | 35 ₹4,550 | 50 ₹6,500 | 50 ₹6,500 | 100 ₹13,000 | 20 ₹2,600 Lowest | 50 ₹6,500 | 50 ₹6,500 |
| 3.00 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge. | 25 | Each | 75 ₹1,875 | 45 ₹1,125 | 90 ₹2,250 | 100 ₹2,500 | 150 ₹3,750 | 20 ₹500 Lowest | 30 ₹750 | 27 ₹675 |
| 4.00 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exceeding 4 Sqm each including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge. | 25 | Each | 75 ₹1,875 | 45 ₹1,125 | 90 ₹2,250 | 100 ₹2,500 | 150 ₹3,750 | 20 ₹500 Lowest | 50 ₹1,250 | 36 ₹900 |
| 5.00 | Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed by Engineer-in-Charge. | 10 | Per leaf | 75 ₹750 | 20 ₹200 Lowest | 50 ₹500 | 50 ₹500 | 100 ₹1,000 | 20 ₹200 Lowest | 50 ₹500 | 50 ₹500 |
| 6.00 | Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-Charge. | 20 | Per leaf | 75 ₹1,500 | 22 ₹440 | 50 ₹1,000 | 50 ₹1,000 | 100 ₹2,000 | 20 ₹400 Lowest | 50 ₹1,000 | 50 ₹1,000 |
| 7.00 | Material and labour for factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm on either side including PCC (1:3:6) type C-0 in back filling of chowkhats and two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks/ concrete surface. Colour/ shade will be approved by Engineer-in-Charge complete all as specified and as directed. | 25 | Running Metre | 400 ₹10,000 | 310 ₹7,750 | 400 ₹10,000 | 300 ₹7,500 | 400 ₹10,000 | 450 ₹11,250 | 260 ₹6,500 | 200 ₹5,000 Lowest |
| 8.00 | Material and labour for factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm on either side including PCC (1:3:6) type C-0 in back filling of chowkhats and two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks/ concrete surface. Colour/ shade will be approved by Engineer-in-Charge complete all as specified and as directed. | 20 | Running Metre | 400 ₹8,000 | 340 ₹6,800 | 400 ₹8,000 | 300 ₹6,000 | 400 ₹8,000 | 500 ₹10,000 | 350 ₹7,000 | 250 ₹5,000 Lowest |
| 9.00 | Supply and fixing 35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. | 30 | Square Metre | 1,800 ₹54,000 | 1,300 ₹39,000 | 2,000 ₹60,000 | 1,800 ₹54,000 | 1,100 ₹33,000 Lowest | 1,900 ₹57,000 | 1,800 ₹54,000 | 2,200 ₹66,000 |
| 10.00 | Supply and fixing 35mm thick factory made second class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24 (b) supplied and fitted to chowkhats complete all as specified and as directed. | 20 | Square Metre | 1,800 ₹36,000 | 1,300 ₹26,000 | 2,000 ₹40,000 | 1,800 ₹36,000 | 1,100 ₹22,000 Lowest | 1,700 ₹34,000 | 1,800 ₹36,000 | 2,200 ₹44,000 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
18 Jun 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
CERTAIN B/R REPAIR TO OTM AND MD ACCN INCLUDING DAILY COMPREHENSIVE MAINTENANCE SERVICES IN ZONE A AT DAMANA UNDER GE JAMMU
2025_MES_709077_1
GEJC-26/2025-26
Open Tender
Civil Works
Item Rate
180 days
AOR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
29 Oct 2025
19 May 2025
20 Jun 2025
19 May 2025
18 Jun 2025
2 Jun 2025
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .