Bembali K.T.W. No.2 Repair Ta.Dharashiv

Part A Item No.1: Excavation in all kinds of soil and soft murum including boulders upto 0.6 m. diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road/ embankment as directed including cost of all materials, macinery, labour, dressing bed and sides to required level and profile etc. complete with lead upto 15 m. and all lifts as directed.

Item No.1.2: Excavation for Nalla Deepening

Item No.2: Excavation in hard murum including boulders upto 0.6 m. diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment including cost of all materials, machinery,labour, dressing bed and sides to required level and profile etc. complete with lead upto 15m. and all lifts as directed

Item No.3: Excavation in soft rock without blasting including boulders upto 0.6 m. diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. complete with leads upto 15 m.and all lifts as directed

Item No.4: Providing and laying in situ cement concrete of grade M-15 of trap / granite/ gneiss / quartzite/ graded metal for PCC with or without surface reinforcement / RCC concreting for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with concrete Mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km. and all lifts etc, cinokete as durected, (A) M-15 (20MSA) (Cement 5.64 bags/ cum)

Item No.5: Providing, fabricating and placing in position reinforcement steel for RCC works including cutting, bending, hooking, laying in position and tying M.S./ HYSD / TMT bars for reinforcement of R.C.C. work as per detailed drawing etc. complete as directed

Item No.6: Back filling upto ground level behind the canal structures etc. complete with suitable material ofapproved quality in layers not exceeding 20cm. without disturbing the structure etc. complete as directed.

Item No.7: Providing and constructing 230mm. thick dry rubble stone pitching using stones and stone chips from approved source from borrow area including cost of all materials, labour, hand packing/ wedging stone chips, finishing etc. complete with lead upto 50m. and all lifts.

Item No.8: Providing structrual Steel (ISWB 166 x 108 x 8 mm. ) in rolled seciton like joints angle etc. as detailed design and drawing including fixing in position with hold fasts, including oil paint with two coat including one coat anticorrosive paint etc.complete (For channel 166 x 108 x 8mm.)

Item No.9: Providing structural steel (ISWB 150 x 100 mm.) in Rolled section like joints, angles etc. as per detailed design and drawing including fixing in position with hold fasts, including oil paint with two coats including one coat anticorrosive paint etc complete (For sill beam 150 x 100)

Item No.10: Dismantling the stone masonry in cement mortar including stacking the material with 15m. lead and all lifts etc. complete as directed

Item No.11: Providing and fixing Canal information baord of 1.2 x 0.75 m. prepared on 16 guage M.S.sheet with angle iron frame of size 35 x 35 x 3mm. with cross bracing of size 25 x 25 x 3 mm. including painting with one coat of zinc chromate storing primer and two coats each of green / white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numberal / arrows coated with non-peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5mm. of 3.65 m. long inflated at bottom drilled on top and painted in white and black bonds of 30cm. with four numbers high strength of G.I. bolts and nuts of size 10 mm. dia. and 20 mm. long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75cm. as directed.

Part A Total

Part B __ 1 % Insurance

GST Charges

Royalty Charges

10% For Jilha Khanij on Royalty

part B Total

Please Enable Macros to View BoQ information