Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.7 Cr
EMD Value
₹3.4 L
Closing Date
31 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engine Division, Koraput
HINDUSTAN AERONAUTICS LIMITED Engine Division, Koraput, Sunabeda- 763002
ROOF LEAKAGE TREATMENT TO THE RESIDENTIAL QUARTERS AND PUBLIC BUILDINGS IN HAL TOWNSHIP
8265
E TENDER NOTICE W-11/23-24
Works
Mig Complex- Engine Divn-Koraput-Civil
₹0
₹3.4 L
31 Jul 2024
27 Jun 2024
27 Jun 2024
31 Jul 2024
Labour charges for dismantling/ taking out of existing old damaged concrete, PCC, tiles tarfelt layer including base plaster of any thickness / description, including haking for key, cleaning of bitumen/ primer over the surface with wire brush, scrubbing down with water etc. to receive new plaster etc. The work also includes disposal of debrises upto a lead distance of 50m or nearer etc. all complete as per specification and direction of Engineer in charge.
Labour charges for dismantling of reinforced cement concrete of any description including cutting of reinforcement and in any position as per requirement. The work also includes disposal of debrises upto a lead distance of 100m or neareretc. all complete as per specification and direction of Engineer in charge.
Supplying carring to site all approved material providing and laying PCC (1:2:4) using 20 mm and down hard granite graded stone aggregates in roof , kerbs or mud stops, rounded or chamfered on edges,over RCC roof with a proper slop towards nearest rain outlet pipe and curing etc. all complete as per specification and direction of Engineer in charge.
Supplying carring to site all approved material providing and laying 25mm thick, PCC (1:2:4) using 12.5mm down hard granite graded stone aggregates over RCC roof with a proper slope towards nearest rain outlet pipe and curing etc. all complete as per specification and direction of Engineer in charge.
Supplying and carrying to site all approved material, Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt of approved make. The work consists of applying 1st coat of bitumen primer applied @ 0.4 ltr / Sqm of the surface area. The bitumen primer for bitumen membrane manufactured by the same manufacture shall have density at 25°C in the range of 0.87 – 0.89 Kg/Ltr and viscosity 70 – 160 CPS. The primer shall confirm to the requirement laid down in IS-3384.. The second coat of bonding material of blown type bitumen 85/25 conforming to IS : 702 heated to the required temperature applied @ 1.20 kg/ smt of the surface area. The work also includes cutting grooves in brick wall of required width and depth and shapiing horizontol face of groove with cement mortar 1 :3 after laying of APP membrane into it. In the third course the APP modified membrane of specified thickness shall be laid over the blown type bitumen using buten torch and sealing all joints etc, and preparing the surface complete. Each strip of APP membrane shall overlap the preceding one by one at least 10cm at the longitudinal edges and 15cm at the ends.
All overlaps shall be firmly bonded with bitumen primer / blown grade bitumen & levelled by heating the overlaps with butane torch. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The work to be carried out through authorised applicator of manuufacturer complete all as specified and as per direction by Engineer in charge.The treated area of water proofing shall be tested for any leakages by pond test. The rates include for necessary end and side laps and work in any position and in any shape etc. all complete as per specification and direction of Engineer in charge.
Supplying, carrying to site approved materials & providing 25 mm thick cast - in - situ cement concrete tile (1:2:4) using 12.5 mm down aggregate with panel size 2400 X 2400 mm or as per requirement at site as per direction of EIC. The gap/joint of the tiles both inner / outer joints are to be filled with approved quality weather proof silicone sealant confoming to IS. The size of the gap/ joint to be filled with the silicone sealant is 10 mm X 25 mm etc. all complete as per specification and direction of Engineer in charge.
Labour charges for taking down old cement plaster on wall surface which includes raking out joints,hacking for key,scrubbing down with water of any description and any thickness. The work also includes erection of safe and rigid scaffolding and disposal of debrises upto a lead distance of 50m or nearer etc. all complete as per specification and direction of Engineer in charge.
Supplying and carrying to site all approved materials and providing 15mm thick plastering with CM (1:4) and mixing of integral water proofing compound @ 0.10 Kg per bag of cement of approved make. The work includes erection of necessary scaffolding including rendering, floating,drip couse,border in chajja finishing the surface even and neat curing etc. all complete as per specification and direction of Engineer in charge.
Supplying and carrying to site all approved material and providing, mixing and applying 12mm average thickness SBR Polymer ( of approved make) modified cement mortar in proportion of 1:4 with polymer minimum 2% by weight of cement used etc. all complete as per specification and direction of Engineer in charge.
Supplying carrying to site all approved materials & providing Brick masonry work with common burnt clay F.P.S (non-modular bricks of class designation 7.5 in super structure in CM(1:4). The work also includes erection of safe and rigid scaffolding, curing etc. all complete as per specification and direction of Engineer in charge.
Total
I / We hereby quote percentage above (+) or below (-) the Estimated cost
Sub Total Works Amount
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable
ADD CESS @ 1%
GRAND TOTAL
The defect liability period for the above contract shall be for the period of Five years for Special nature of work (Water proofing)..During this period the contractor will be responsible to rectify all the defect noticed and pointed out by the Department in respect of works executed by him against above contract. 10% of executed amount for special nature / items of Work will be considered as defect liability deposit for such items of Work . This amount will be withheld for a period of 05 years. A guarantee on non-judicial stamp paper of Rs.200/- or as specified against an item in the BOQ has to be furnished by the Contractor along with the final bill.
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST. GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
HINDUSTAN AERONAUTICS LIMITED KORAPUT DIVISION CENTRAL CONTRACT CELL
Name of the Work
Line No
Name of the Contractor
Check list and acceptance for submission of documents with tender
Constitution and Legal Status of Bidder
Submission of cost of Tender documents by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded)
Submission of EMD Amount by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded)
Submission of Banker’s Solvency certificate for an amount as mentioned in tender issued by any nationalized bank issued within a period of 12 months from the final date of submission of tender
Submission of Work order copies for having executed similar works in Govt./ Railways/PSUs/Reputed firms
Submission of Performance / Completion certificates from Govt./Railways/PSUs/Reputed Private Firms (supported with TDS certificate if from Reputed Private firms) in the last 7 years.
For Two works value
For Three works value
Submission of Contractor’s Registration Certificate with Govt./Quasi Govt./PSUs /Reputed Company
Submission of Income Tax Return for last 3 financial years.
Submission of Average Annual financial turnover during the last 5 years
Balance sheet for the last 5 years
Plant and Machinery details of work
Proposed work completion Schedule in the form of Bar Chart
Work in Hand in the required format
Bank Balance Statement for the last three months
Overdraft facilities available with the agencies
Submission of Copy of PF Registration
Submission of Copy of Labour License
Submission of Copy of PAN Card
Acceptance of “General Condition of Contract and Instruction to tenderers” and “Notice Inviting Tender” along
NEFT/RTGS Format Duly filled in (Original to be submitted in the office)
GST REGISTRATION NO:
Submission of Copy of ESI Registration
LIST OF WORK IN PROGRESS FOR THE WORK
Line No.
NAME OF THE CONTRACTOR
HINDUSTAN AERONAUTICS LIMITED KORAPUT DIVISION CENTRAL CONTRACT CELL
Name of the Work
Line No
Name of the Contractor
Check list and acceptance for submission of documents with tender
Constitution and Legal Status of Bidder
Submission of cost of Tender documents by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded)
Submission of EMD Amount by way of DD/BC drawn in favour of HAL, Engine Division, Koraput, payable at SBI, Sunabeda (Scanned image of the same in jpg format only to be uploaded)
Submission of Banker’s Solvency certificate for an amount as mentioned in tender issued by any nationalized bank issued within a period of 12 months from the final date of submission of tender
Submission of Work order copies for having executed similar works in Govt./ Railways/PSUs/Reputed firms
Submission of Performance / Completion certificates from Govt./Railways/PSUs/Reputed Private Firms (supported with TDS certificate if from Reputed Private firms) in the last 7 years.
For Two works value
For Three works value
Submission of Contractor’s Registration Certificate with Govt./Quasi Govt./PSUs /Reputed Company
Submission of Income Tax Return for last 3 financial years.
Submission of Average Annual financial turnover during the last 5 years
Balance sheet for the last 5 years
Plant and Machinery details of work
Proposed work completion Schedule in the form of Bar Chart
Work in Hand in the required format
Bank Balance Statement for the last three months
Overdraft facilities available with the agencies
Submission of Copy of PF Registration
Submission of Copy of Labour License
Submission of Copy of PAN Card
Acceptance of “General Condition of Contract and Instruction to tenderers” and “Notice Inviting Tender” along
NEFT/RTGS Format Duly filled in (Original to be submitted in the office)
GST REGISTRATION NO:
Submission of Copy of ESI Registration
LIST OF WORK IN PROGRESS FOR THE WORK
Line No.
NAME OF THE CONTRACTOR
SCHEDULE-A
HINDUSTAN AERONAUTICS LIMITED
KORAPUT DIVISION
CENTRAL CONTRACT CELL
COMMERCIAL BID
BILL OF QUANTITIES FOR THE WORK OF "WATER PROOFING TREATMENT TO 602, BMU SHOP AND ELECTRICAL SUBSTATIONS INSIDE HAL ENGINE DIVISION, KORAPUT"
LINE NO : KPTCC/W/368-1
NAME OF THE AGENCY :
Labour charges for Demolishing mud phaska in terracing and disposal of material within 50 metres lead etc. at all heights with necessary safety precautions etc. all complete as per specification and direction of Engineer in charge.
Labour charges for removal of old cement plaster / old tarfelt layar with base plaster of any thickness/ description on roof / walls etc. at all heights including cleaning of surfaces,scrubbing down with water etc. all complete as per specification and direction of Engineer in charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved etc. all complete as per specification and direction of Engineer in charge.
Supplying and carrying to site all approved material , Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre mattt..The work consists of applying 1st coat of bitumen primer applied @ 0.40Ltr. /Smt of the surface area. The bitumen primer for bitumen membrane manufactured by the same manufacture shall have density at 25°c in the range of 0.87-0.89 kg/ltr and viscosity 70-160 CPS.The primer shall conform to the requirements laid down in IS-3384.The second coat of bonding material blown bitumen 85/25 conforming to IS : 702 applied hot @ 1.20 Kg per square metre of the surface area.. In the third course the APP modified membrane of specified thickness shall be laid over the blown type bitumen using butane torch and sealing all joints etc, and preparing the surface complete.Each strip of APP membrane shall overlap the preceding one by one at least 10cm at the longitudinal edges and 15cm at the ends..
All overlaps shall be firmly bonded with bitumen primer / blown grade bitumen & levelled by heating the overlaps with butane torch. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The work to be carried out through authorised applicator of manuufacturer complete all as specified and as per direction by Engineer in charge.The treated area of water proofing shall be tested for any leakages by pond test. the rates include for necessary end and side laps and work in any position and in any shape etc. all complete as per specification and direction of Engineer in charge.
Supplying,carrying site all approved material and providing 20mm thick screed bed plaster in CM(1:4) with WPC @ 0.1kg per 50kg bag of cement in all hight with erection of necessary safe and rigid scaffolding including rendering floating, finishing the surface even, neat and curing etc. all complete as per specification and direction of Engineer in charge.
Supplying, carrying to site all approved materials providing Grading roof for water proofing treatment with cement concrete (1:2:4) using 12.5mm and down graded aggregate etc . The work includes preparation of sub grade to the required gradient/ level consolidation and curingetc. all complete as per specification and direction of Engineer in charge.
Dimolishing of of reinforced concrete work manually/ by mechanical means including staking of steel bars and disposal of unserviceable materials within 50mtr lead etc. all complete as per specification and direction of Engineer in charge.
Supplying, carrying to site all approved materials and providing 15mm thick plastering with CM (1:4) on rough side of single or half brick wall with integral water proofing compound @ 0.1kg per bag of cement(of 50kg) of approved make in all hight with erection of necessary safe and rigid scaffolding including rendering floating, finishing the surface even, neat and curing etc. all complete as per specification and direction of Engineer in charge.
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty and providing and fixing Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) etc. all complete as per specification and direction of Engineer in charge.
Supplying,carrying to site all approved material and applying two or more coat of white washing on wall or ceiling surface at all hights. The work includes prparation of surface i,e all loose particles and scales shall be scrapped off and holes in plaster as well as patches of less than 50 cm area shall be filled up with mortar of the same mix. The lime wash shall be prepared from fresh stone white lime (Narnaul or Dehradun quality). The lime shall be thoroughly slaked on the spot, mixed and stirred with sufficient water to make a thin cream. This shall be allowed to stand for a period of 24 hours and then shall be screened through a clean coarse cloth. 40 gm of gum dissolved in hot water, shall be added to each 10 cubic dicimetre of the cream. The approximate quantity of water to be added in making the cream will be 5 litres of water to one kg of lime. Indigo (Neel) upto 3 gm per kg of lime dissolved in water, shall then be added and stirred well. Water shall then be added at the rate of about 5 litres per kg. of lime to produce a milky solution.The work also includes cleaning / washing areas after white washing etc. all complete as per specification and direction of Engineer in charge.
Supplying carrying to site all approved materials and finishing wall with acrylic smooth exterior paint of required shade two or more coats applied @ 1.67ltr/10sqm over and including priming coat of exterior primer applied @ 0.9 ltr/10Sqm over plaster surface in all heights.The paint should provide good /enhanced dirt,fungal and wheather resistance to exterior works .The work shall include the preparation of wall surface by using sand paper, wire brush, removal of scales and peeled surface, filling the pits / depression, nail-holes by putty and painting uniformly without any patches and brush marks including erection of safe scaffolding, cleaning, washing the areas after painting etc. all complete as per specification and direction of Engineer in charge.
Supplying carrying to site all approved materials,providing and fixing unplasticised -PVC pipe clips 110 mm of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. all complete as per specification and direction of Engineer in charge.
Total
I / We hereby quote percentage above (+) or below (-) the Estimated cost
Sub Total Works Amount
ADD GST @ 18% (( IGST18%) or (CGST @ 9% +SGST@ 9%)), Whichever is applicable
GRAND TOTAL
The defect liability period for the above contract shall be for the period of Five years for Special nature of work (Water proofing- For item no 01 to 08) and One year for other items ..During this period the contractor will be responsible to rectify all the defect noticed and pointed out by the Department in respect of works executed by him against above contract. 10% of executed amount for special nature / items of Work will be considered as defect liability deposit for such items of Work . This amount will be withheld for a period of 05 years. A guarantee on non-judicial stamp paper of Rs.200/- or as specified against an item in the BOQ has to be furnished by the Contractor along with the final bill.
Note : (i) : It is a percentage rate tender. Hence the tenderers are required to quote rates on percentage basis i.e. above or below the estimated cost put to tender. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess, Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end.
GOODS AND SERVICE TAX (GST)
Bidder should indicate GSTIN No. (Copy of GST registration to be enclosed) and PAN No. (copy of PAN to be enclosed).
Tender will be considered/ accepted, if & only if the vendor has a valid GST Registration No
Central Tax/ State Tax/ Integrated Tax/ Union Territory tax to be quoted as per GST Law
Bidders to ensure correct applicability of Central Tax/ State Tax/ Integrated Tax/ Union Territory tax based on the Inter / Intra state movement Supply of goods and provision services or both
Bidder shall mention the SAC Code/HSN Code for goods and services in accordance with GST law in their Bid and subsequently in their tax invoice. HAL, Koraput Division shall not be responsible for any error in SAC Code/HSN Code for goods and/or services specified by supplier/contractor
The Tax Invoice for supply of Goods & Services should be raised as per the provision of GST Act & Rules and must compulsorily mention the following
a. HAL, Korpaut Division GST registration number as 21AAACH3641R1ZJ
b. Name & address of supplier / Vendor/ Contractors
c. GSTIN of Supplier / vendors / Contractors
d. Consecutive Serial Number & date of issue
e. Description of goods or services
f. Total value of supply
g. Taxable value of supply
h. Tax Rate – Central Tax & State Tax or Integrated Tax, Cess
i. Amount of Tax charged
j. Place of supply
k. Address of delivery if different from place of supply
l. Signature of authorized signatory
Reimbursement of GST to the vendor is contingent upon complying with the following condition by the service provider
i. Uploading the (invoices raised on HAL, KoraputDivision ) onward GST Return (GSTR-1) in GSTN Network portal within the statutory time period
ii. Discharging the GST tax liability to the Government.
iii. Submission of Tax Invoice to HAL, Korpaut Division.
iv. Submission of proof of payment of GST to HAL, Korpaut Division.
v. Receipt of goods / services by HAL Koraput Division.
vi. Availment of Input Tax Credit by HAL, Korpaut Division .
In case GST credit is delayed/ denied to HAL, Korpaut Division, due to non/delayed receipt of goods and/or services and/or tax invoice or expiry of timeline prescribed in GST Law for availing such ITC, or any other reason not attributable to HAL, Korpaut Division, GST amount shall be recoverable from Vendor along with interest & penalty levied/ leviable on HAL, Korpaut Division, as the case may be
In case vendor delays declaring such invoice in his return and GST credit availed by HAL, Korpaut Division is denied or reversed subsequently as per GST law, GST amount paid by HAL, Korpaut Division towards such ITC reversal as per GST law shall be recoverable from vendor/contractor along with interest & penalty levied/ leviable on HAL, Korpaut Division.
In case of discrepancy in the data uploaded by supplier in the GSTN portal or in case of any incomplete work/service, then HAL, Korpaut Division will not be able to avail the tax credit and will notify the supplier of the same. Supplier has to rectify the data discrepancy in the GSTN portal or issue credit note (details to be uploaded in GSTN portal).
For any such delay in availing of tax credit for reasons attributable to vendor (as mentioned above), interest as per the GST Act & Rules, along with penalty, if any will be deducted for the delayed period i.e. from the month of receipt till the month tax credit is availed, from the running bills.
Penalty amount so determined along with GST if applicable thereon shall be recovered from the contractor.
Any reduction in rate of Tax on any supply of goods or services or the benefit of input tax credit shall be passed on to the recipient by way of commensurate reduction in prices. Bidders have to submit declaration in their bid that they have complied with ‘Anti-profiteering clause’ under GST law.
The bidder’s quoted rates/ price should be after considering the Input Credit under GST law at their end, since GST on output (GST amount charged in Invoice) will be paid by HAL.
In case any changes in taxes and duties as per Gov. Notification (including GST), the same shall be applicable from time to time.
Quarters will be allotted to the awarded agency subject to availability & recommendation from the E-I-C/ O-I-C for which rents as applicable will be recovered from the running bills of the agency.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
3.AM.pdf
TENDER_DOCUMENT • 5.21 MB
NIT11.pdf
TENDER_DOCUMENT • 1.28 MB
2.NEWGCC2023.pdf
TENDER_DOCUMENT • 2.92 MB
NIT11_2.pdf
TENDER_DOCUMENT • 1.28 MB
PRQ.pdf
TENDER_DOCUMENT • 0.09 MB
UNDERTAKING.pdf
TENDER_DOCUMENT • 0.04 MB
UNDERTAKING_2.pdf
TENDER_DOCUMENT • 0.04 MB
15.EPS.pdf
TENDER_DOCUMENT • 0.02 MB
15.EPS_2.pdf
TENDER_DOCUMENT • 0.02 MB
PBO372-1.xlsm
TENDER_DOCUMENT • 0.04 MB
CL.xls
TENDER_DOCUMENT • 0.05 MB
WIP.xls
TENDER_DOCUMENT • 0.02 MB
PERCENTAGERATEBOQ.pdf
TENDER_DOCUMENT • 0.09 MB
368CL.xls
TENDER_DOCUMENT • 0.05 MB
368WIP.xls
TENDER_DOCUMENT • 0.02 MB
CBO368-1.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .