Petty repairs to certain building for day to day maint at Mil Station Kapurthala under GE Kapurthala

Amount

Taking down and refixing of shutter of any description area exceeding 1 Sqm but n exc 2 sqm each, after easing, tightening pins etc to ensure smooth operation of shutter complete all as specified.

Securing or easing and adjustment without taking down the shutter of any description exc 1 sqm and n exc 2 sqm each complete all as spd and directed

S&F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width 1.18mm and fixed with tinned tacks of galvanised wire stapple etc wooden/fillets complete all as specified.

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in square exc 0.50 sqm in each pane complete all as specified.

M&L for second class hard wood plain fillets square or rectangular in section, clean sawn, planed on both sides, sectional area exc 3 Sqcm and n.exc 6 Sqcm, fixed with nails including two coats of synthetic enamel paint over a coat of primer after preparation of surfaces complete all as specified.

M&L for second class hard wood plain fillets square or rectangular in section, clean sawn, planed on both sides, sectional area exc 13 Sqcm and n.exc 25 Sqcm, fixed with nails including two coats of synthetic enamel paint over a coat of primer after preparation of surfacescomplete all as specified.

S&F in replacement MS tower bolt 150mm stove enamelled black with bright bolt and fixed complete all as specified.

S&F in replacement MS tower bolt 200mm stove enamelled black with bright bolt and fixed complete all as specified.

S&F in replacement Aluminium tower bolt 150mm stove enamelled black with bright bolt and fixed complete all as specified.

S&F in replacementAluminium tower bolt 200mm stove enamelled black with bright bolt and fixed complete all as specified.

S&F in replacement MS sliding door bolts of size 250mm plate type stove enamelled black with bright bolt not less than 12mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.

S&F in replacement 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in replacement 100 mm hasp and staple aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified.

S&F in replacement 75 mm hasp and staple aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified.

S&F in replacement 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) welded to steel chowkats complete all as specified.

S&F in replacement 125mm Aluminium handles, cast type, anodised

S&F in replacement 150 mm Aluminium handles, cast type, anodised

M&L for mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved complete all as specified.

Supply, only finials superior quality suitable for 25mm dia curtain rod complete all as specified.

S&F in repair mild steel chromium plated peg set of 6 nos, 45 cm long approx complete all as specified and directed.

S&F in repair peg set , 250mm long, black japan for steel window complete all as specified.

S&F in replacement 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc complete all as specified.

All as per ser item No 24 but 6mm thick complete all as specified .

Taking up or down steel tubing incl connection, 15mm bore including cleaning of serviceable pipe for re-fixing complete all as specified.

All as per ser item No 26 here-in-before but 20mm bore.

S&F mild steel tubes, 15 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified.

All as per ser item No 28 here-in-before but except pipe.

S&F mild steel tubes, 20 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified.

All as per ser item No 30 here-in-before but except pipe.

S&F in replacement galvanized iron socket for 15mm bore pipe replaced independly as approved by Engr-in-charge complete all as specified and directed.

S&F in replacement galvanized iron socket for 20mm bore pipe replaced independly as approved by Engr-in-charge complete all as specified and directed.

S&F in replacement galvanized iron nipple 15mm bore, 50mm long replaced independently as approved by Engr-in-charge complete all as specified and directed.

S&F in replacement galvanized iron nipple 15mm bore, 100mm long replaced independently as approved by Engr-in-charge complete all as specified and directed.

S&F in replacement galvanized iron nipple 15mm bore, 150mm long replaced independently as approved by Engr-in-charge complete all as specified and directed.

S&F in replacement galvanized iron nipple 20mm bore, 50mm long replaced independently as approved by Engr-in-charge complete all as specified and directed.

S&F in replacement galvanized iron nipple 20mm bore, 100mm long replaced independently as approved by Engr-in-charge complete all as specified and directed.

S&F in replacement galvanized iron nipple 20mm bore, 150mm long replaced independently as approved by Engr-in-charge complete all as specified and directed.

S&F in replacement galvanized iron tanki nipple 20mm bore, 100mm long replaced independly complete all as specified and directed.

S&F in replacement galvanized iron tanki nipple 15mm bore, 100mm long replaced independly complete all as specified and directed.

S&F in replacement galvanized iron union 15mm bore complete all as specified and directed.

S&F in replacement galvanized iron union 20mm bore complete all as specified and directed.

S&F in replacement galvanized iron elbow 15mm bore complete all as specified and directed.

S&F in replacement galvanized iron elbow 20mm bore complete all as specified and directed.

S&F in replacement galvanized iron Tee 15mm bore complete all as specified and directed.

S&F in replacement galvanized iron Tee 20mm bore complete all as specified and directed.

S&F in replacement 20mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified. (Minimum weight - 210 gms)

S&F in replacement 15mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified. (Minimum weight - 210 gms)

S&F in replacement 10 ltrs PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, brackets for bottom support, including flush pipe 32mm bore fixing in position complete all as specified.

S&F in replacement flush handle for PVC valveless syphonic action type flushing cistern all as specified.

Petty repairs to low level flushing cistern adjustement of syphon, replacement of washer, adjustement of handle, float valve as requried for making the cistern functional complete as directed.

Removal of air lock, blocking in water pipes/bib taps/stop valve including cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified.

S&F in replacement 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trenches/ under floor complete all as specified.

S&F in replacement PVC (SWR) bend/shoe of any radius for 110mm bore pipes complete all as specified.

S&F in replacement fancy type 15mm bore bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified.

S&F in repair for CP bib cock long body 15mm fancy type complete all as specified.

S&F in replacement 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight - 90 gms)

S&F in replacement rubber washer for 15mm bore bib tap/ Pillar tap/Stop cock etc all as specified as approved by Engr-In-Charge.

S&F in repair 15 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min weight-90gm) complete all as specified.

S&F in repair 20 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min weight- 92gm) complete all as specified.

S&F in replacement fancy type pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified.

S&F in repair stop valves chromium plated with long neck and cup screwed both side for 15mm bore pipe complete all as specified.

S&F in replacement 15mm bore CP brass mixer Hot & Cold for WHB/Sink complete all as specified.

Petty repairs to leaking PVC/Brass tap/stop cock with replacement of washer jumper valve any type and size complete all as specified.

S&F in replacement flush pipe of polythene of low or high density PVC 32mm dia for low level cistern incl all joints complete all as specified.

S&F syphonic action rod with float valve (Complete kit) for flushing cistern fixed in repair complete all as specified.

S&F in replacement brass spindle, any length, for bib tap, stop cock 15mm dia complete all as specified.

S&F in replacement vitreous china wash down water closet pan ORISSA pattern size 580x 440mm white with integrated foot rest, making connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.

S&F Vitreous China wash down Water closet pan (pedestal pattern) "with plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) in repairs complete.

S&F in replacement vitreous china wash hand basin, white flat back, size 550mm x 400mm including mild steel brackets, including cutting for and pinning in ends of bracket complete all as specified.

S&F in replacement PTMT waste coupling (half or full threaded ), (minimum weight 32mm, 45 gms) complete all as specified.

All as per ser item No 72 but 40mm bore for steel sink complete all as specified.

Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats complete all as specified.

S&F in replacement towel rail 600mm long PTMT and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gm) complete all as specified.

S&F in replacement plain aluminium sheeting , alloy 31000 H 4, in ridge, hips 0.56mm thick, fixed with steel screws to door shutters or wooden frame shutters complete all as specified.

S&F in replacement MS angle iron bracket for WHB and kitchen sinks including making good to existing surface ( size of angle 35 x35 x5 mm thick ) complete all as specified.

Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all directed.

S&F in replacement steel window handle MS painted with black japan left or right side complete all as specified and directed.

S&F PVC cover of water tank cap 500/1000 ltrs complete all as specified.

S&F in replacement CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified.

S&F in replacement Swivel shower rose of PTMT of any colour for fixing with 15mm pipe (Min weightt 40 gm) complete all as specified.

S&F in repair PVC waste pipe 32mm bore, for WHB complete all as specified.

S&F in repair PVC waste pipe 40mm bore, for sink complete all as specified.

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat including raking out joints, hacking for key complete all as specified.

Racking out joints/pointing hacking for key , scrubbing down with water complete all as specified.

Cleaning of over head tank of any description and capacity, descaling, washing with detergent powder, removing vegetation around the over head tank/plate form including cleaning of incoming and out going GI tubing complete all as specified and directed.

S&F PVC connection 450mm long with brass nuts suitable for 15mm bore pipe complete all as specified.

Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water all as specified.

M&L for plastering 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified.

M&L for plaster 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement all as specified.

M&L for plaster 10 mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling, chajjas, roof projection etc complete all as specified.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces all as specified.

M&L for preparing surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over chalk whiting, on plastered surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) all as specified.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishing the surface even and smooth without using extra cement all as specified.

M&L for 38 mm wide, 3 mm thick glass dividing strips inserted in position, conforming to design complete all as specified.

S&F in replacement CP Jet for EWC including flexible pipe complete all as specified.

M&L for running welding for repair, any thickness of metal to be welded n exc 6mm complete all as specified and directed.

M&L for running welding for repair, any thickness of metal to be welded n exc 2.5cm complete all as specified and directed.

M&L for running welding for repair, any thickness of metal to be welded exc 2.5cm but n exc 5cm complete all as specified and directed.

S&F new rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position , capacity 500 litres, including 20mm bore PTMT ball valve high pressure with epoxy coated aluminum rod and high density polythene ball including dismantling of unserviceable tank and removing from site complete all as specified and directed.

S&F new rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position , capacity 1000 litres, including 20mm bore PTMT ball valve high pressure with epoxy coated aluminum rod and high density polythene ball including dismantling of unserviceable tank and removing from site complete all as specified and directed.

S&F in replacement glazed ceramic tiles white /coloured (Shade/size as per existing) in dados/floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including rendring 10mm thick in CM 1:4 complete all as specified and directed.

S&F in replacement kitchen sinks of stainless steel 1 mm thick with plugs, washers , incl bedding in cement mortar on dwraf wall or including fixing cantilever brackets and connecting union to pipe , over all size 495mmx420mm bowl size 420mmx330mmx160mm complete all as specified.

S&F in replacement stainless steel kitchen plate rack, made out 1mm thick stainless steel, size 900x600x200mm (Minimum weight 10 Kg) with shelves and plate position as approved complete all as specified and directed.

S&F in replacement PVC cabinet size 450mmx325mmx120mm with looking mirror and making good the disturbed surface complete all as specified.

S&F in replacement hand shower/ health fauset (ABS Chrome Plated) with 8mm dia, 1 metre long flaxible tube & wall hook complete all as specified.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in replacement stainless steel soap dish fixed with brass screws and rawl plugs complete all as specified.

S&F in replacement stain less steel paper holder complete all as specified.

S&F in replacement acrylic cabinet of size 450mmx100mm fixed with chromium plated brass screws and plastic gutties complete all as spd

S&F in replacement of angle cock/stop cock spindle 15mm dia and length of spindle 50mm dia complete all as specified.

S&F in replacement of angle cock/stop cock spindle 15mm dia and length of spindle 75mm dia complete all as specified.

Petty repairs to aluminium window and ventilator shutters, by making minor adjustment to hinges etc easing shutter including taking down of shutter if required and refixing in same position complete all as specified.

Petty repairs to aluminium door shutters, by making minor adjustment floor spring etc easing shutter including taking down of shutter and refixing in same position after providing new rubber beading around the glass, screws etc. complete all as specified.

Taking down Aluminium door shutter and replacement of pivot set for movement of swing door and refixing door shutter in same opening complete all as specified.

S&F mild steel 2 levers mortice lock, vertical type, size 100 mm complete all as specified.

S&F in repair replacement Cast iron body door closer hydraulically regulated, designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as specified.

M&L for 18 to 20mm thick Dholpur stone cladding in patches, to be replaced and fixed upto five storey high buildings, stone saw cut with machine cut edges, uniform colour, stone size not exceeding 0.25 Sqm, fixed with bostic no more nails constrction adhesive including making 'V' grooves at top and bottom of stones, drilling holes for fixing with and including 3 numbers of10mm dia 75/100mm long mild steel fasteners, rubbing, polishing and silicon treatment, over and including 15 mm thick screed bed in cement mortar 1:3 including taking down existing broken stone and screed bed and cleaning surfaces complete all as specified and directed.

S&F in replacement brass chromium plated shower rose with or without swivel joints, 125mm size with arm including fixing to steel pipe or union complete all as specified.

Supply and fixing double legged floor door stopper aluminium alloy body and tongue, with hard drawn steel spring overall length of cover plate 140mm complete all as specified.

S&F CP Glass corner shelf including CP railing, radius 250mm fixed in repairs complete all as specified.

Petty repairs to cup board (Kitchen) including easening of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing handle etc with drawers adjusting of ball catches etc, (One unit shall comprises one cup board irrespective in numbers of shutters and drawers) complete all as specified.

Ditto all as per ser item No 127 above but cup board (Bedroom) excluding drawers complete all as specified.

S&F in repairs continous paino hinges, mild steel bright finish or electro galvanized width of flap 40mm when open complete all as specified..

S&F mild steel strip 40mm wide 2mm to 6mm tapered rubber brush beading of length n exc 1.2 mtr fixed to door shutters with nails as in repairs complete all as specified.

M & L for block board 18/19mm thick grade 2 quality, interior grade, decorative face veneer on one face in cup board or drawers complete all as specified.

KAMAL AGGARWAL

COSMO BUILDERS