Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC | L1 | Accepted-AOC Awarded | |
| 2 | L2₹17.5 L+₹1.1 L (6.48%)Rejected-Finance 441 G F LIG FLATS PH 2 SEC 14 PKT 3 DWARKA NEW DELHI SECTOR 14 DWARKA DWARKA SOUTH WEST DELHI DELHI 110078 | SOUTH WEST DELHI | DELHI | 110078 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹18.7 L+₹2.3 L (14.2%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹19.9 L+₹3.5 L (21.3%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹21.2 L+₹4.8 L (29.1%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹24.3 L
EMD Value
₹48,500
Closing Date
24 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Subroto Park
GE AF Subroto Park c o 56 APO
ADDITION/ ALTERATION TO TOILET AT VARIOUS LOCATIONS AT P-83 AT CAMERO COMPLEX
2022_MES_541914_1
GE/SP/ TOKEN-27/2022-23
Open Tender
Civil Works
Item Rate
120 days
Subroto Park Delhi Cantt
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE AF Subroto Park
₹48,500
Yes
13 Oct 2022
29 Jul 2022
31 Aug 2022
29 Jul 2022
24 Aug 2022
12 Aug 2022
Amount
Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
M&L for rendering CM (1:6) 15 mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg in and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.
M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.
M & L for rendering 5mm thick on ceiling in cement mortar 1:3 finished fair and even smooth without using extra cement etc built in cement mortar and removing the debries outside the MOD land complete all as specified and directed by Engr In Charge.
Taking down Chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not n.exc 4.0 sqm (including make good with CM 1:4 and hold fast) complete all as specified and directed by Engr In Charge.
All as per sr item No 5 above but area not exc 1.5 Sqm .
S&F aluminium frame powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc. including taking down each chowkhats or frames with shutters (without taking off shutters from the frames) complete all as specified
S&F for powder coated aluminium doors shutters,( thickness of powder coating not less than 50 micron) aluminium section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing , handles 2 Nos in each door , hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by engr-In-Charge.
S&F aluminium powder coated any colour (minimum thickness of powder coating 50 micron) as in window and ventilator shutters, sliding type three track, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber packing, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engr-In-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed by Engr In Charge.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face complete all as specified and directed by Engr In Charge.
S&F 150mm long Aluminium anodised, barrel tower bolts of ex- truded section and fixed complete and specified and directed by engr-in -charge.
S&F 150mm long aluminium handle cast type polished bright complete and specified and directed by engr-in -charge.
S&F 100 mm long butt hinges medium weight, stenless steel, and fixed complete and specified and directed by engr-in -charge.
S & F aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified and directed by Engr In Charge.
Dismantling of stone slab and granite of any description or thickness in floors etc and removing the debries outside the MOD land complete all as specified and directed by Engineer-in-Charge.
M & L for 15 mm thick screed bed or bedding layer of cement mortar (1:4), for laying of granite complete all as specified and directed by Engr In Charge.
M&L for pure black Granite (of any type) tiles 20mm (+-2mm) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulded ofnedges grinding and polishing complete all as specified and directed by Engr-in-Charge.
Dismantling of loose concrete cover of RCC columns, beams, slabs chajjas and the like as directed, roughening and cleanining concrete surface with steel wire brushes, washed with water and allowed to dry, incl derusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm x 2 mm dia as reinforcement to concrete. After placing the additional reinforcement all concrete surfaces shall thoroughly scrubbed with brushes, washed with water and alloy to dry to this surfaces apply chemical polycrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mmj thick (average thickness ) gunniting/grouting mix (using 1 part of ordinary Portland cement 53 Grade and 2 parts of ghaggar sand mixed with adhessive / admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sq cm by gunniting machine and surfaces finished even and fair, incl necessary padding, shuttering / form work . 15 mm thick cement plaster in CM (1: 4 ) complete all as specified and directed by Engineer - in -charge.
Supply only liquid water proofing compound. complete all as specified and directed by Engr In Charge.
Demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge.
M&L for providing and making fillet of 75mmx75mm in size with cement concrete in 1:2:4 in sunken portion, complete all as specified and directed by Engr In Charge.
Refilling Lime concrete with brick aggregate (Course) in lime mortar1:3, in the sunken with the help of proper tools & equipments & plants complete all as specified and as directed by Engineer-in-Charge.
Providing and making cement concrete in 40mm thickness in 1:2:4 type B0 (12.5mm graded aggregate) mixing Dr Fixit Pidiproof LW+. Complete in sunken upto the below level of tiling complete all as specified and as directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed by Engr In Charge.
M&L for Glazed ceramic coloured tiles in vertical surface 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl back plaster 10 mm thick in cm 1:4 complete all as specified and directed by Engr In Charge.
M&L for Virified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) over 100mm thick plain cement concrete, type D-2, 1:4:8, complete all as specified and directed by Engr In Charge.
M&L for non skid ceramic joint free coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM(1:6) complete all as specified and directed by Engneer-in-Charge.
M&L for preparation of new plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 3mm thick elastomeric wall care putty on walls up to four storey height building complete and specified and as directed by engr-in -charge.
M&L for prepration of old plastered or unplastered surfaces of walls and applying two coat of approved shade of oil emulsion distemper, including repairing of pot holes and cracks with putty, up to four storey height building complete all as specified and directed by Engr-in-Charge.
M&L for preparation on new or previously untreated wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over putty up to four storey height building complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old plastered or previously untreated wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces over putty up to four storey height building complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new plastered or unplastered surface and applying three coats of white wash on ceiling up to four storey height building complete and all as specified and directed by engr-in -charge.
M & L for preparation of old plastered surface and applying two coats of white wash on ceiling up to four storey height buildingcomplete and all as specified and directed by Engr-in -Charge.
M&L for old surfaces and applying two coat of exterior emulsion paint over a coat of primer any tint (colour as approved by GE) including preparation of surface of wall, band/chajja/balcony up to four storey height building complete all as specified and dircted by Engineer in charge.
Taking down steel tubing or removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge.
All as above item No 37 but 20mm bore.
S&F for 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.
All as per item No 39 above but 20mm bore
Dismantling water tanks exc 500 but not exc 1000 ltrs capasity and removing to store /credit complete all as specified and directed by Engr In Charge.
S&F triple layer Rotational moulded polyethylene 1000 Ltr water storage tanks as per IS (cylindrical vertical with closed top) hoisted and fixed in position as per SSR Part-I specifications including necessary fittings complete all as specified and as directed by Engr-in-Charge.
S &F in repairs for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe orr brass errule and fixed complete all as specified and directed by Engr In Charge.
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store/ Credit (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr In Charge.
S&F 75 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engr In Charge.
S&F 110 mm dia pvc pipe Stack clamps out of 50 mm by 5mm flat iron and 16mm dia round iron stays,enlcuding bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engr In Charge.
S&F PVC SWR bends 110 mm complete all as specified and directed by Engr In Charge.
S&F PVC SWR bends 75 mm complete all as specified and directed by Engr In Charge.
S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified and directed by Engr In Charge.
All as per ser item No 49 above but 75 mm dia..
S&F PVC SWR Junction piece 75 mm double (Double T) provided with access door equal or unequal complete all as specified and directed by Engr In Charge.
S&F 110 mm PVC SWR Junction single (Single T) provided with access door complete all as specified and directed by Engr In Charge.
S&F in repair PVC SWR vent cowl of size 110 mm complete all as specified and directed by Engr In Charge.
S&F in repair PVC SWR vent cowl of size 75 mm complete all as specified and directed by Engr In Charge.
Supplying and fixing in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, excluding fixing bolts, flushing cistern and flush pipe) complete all as specified.
S&F in repair PVC SWR floor trap with grating including jointing with solvent cement 75 mm dia complete all as specified and directed by Engr In Charge.
S&F in repairs10 ltr capacity PVC flushing cistern coloured with accessories Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete and specified and directed by engr-in -charge.
M&L for 5mm thick frame less mirror with chromium plated brass clam screws and cup washers or fixing arrangement to wall in repairs complete all as specified and directed by Engr In Charge.
S & F in repairs for 125mm dia Steelness steel grating doom with waste hole for waste pipe ( minimum weight 40 gram) complete all as specified and directed by Engr In Charge.
S&F in repair gun metal globe valve or gate valve with mild steel iron wheel head, screwed both ends for iron pipe & fifed for 20 mm bore complete all as specified and directed by Engr In Charge.
S/F in repairs 15 mm Stop valves,fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and directed by Engr-in-Charge.
S & F in repairs 15mm CP bib tap fancy type copper alloy with crutch or butterfly handle , screwed down, screwed for iron pipe etc complete all as specified and directed by Engr In Charge.
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cemen complete all as specified and directed by Engr In Charge.
Material and labour for false ceilings using GI sanp grid system with rool-formed out of hot drip galvanised steel capings (Powder coated) main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceilimg board, prepainted cement fibre board size 595x595x4mm thick any texture (Lake, Hill, ocean cascade or Electra ) suspended from from RCC roof/ structural members of soofits angle cleat cut out etc to ther equired line and shape as per manufactureres recommndations at any height complete all as specified and as directed by GE, Make:- Everest ceiling and grid system Regular T-2430 or its equivalent Make of "Ramco/Charminar/Armstrong"
M & L in repairs for 15 mm dia Fancy type Chromium plated Angle valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr In Charge.
S&F in repairs CP tubular Towel rail , 20 mm dia, D Type 600mm long between flanges brass chromium plated with screws and cleats, (Minimum weight 190 gms) complete all as specified and directed by Engr In Charge.
S&F in repairs soap dish, Steelness steel approximate size 160x160x90mm fixed to plugs with chromium plated brass screws etc complete all as specified and directed by Engr In Charge.
S&F 15mm dia PVC Connection 450 mm long with nuts complete all as specified and directed by Engr In Charge.
S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting with padestal complete all as specified and directed by Engr In Charge.
S & F in repair for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr In Charge.
S&F 10mm plain toughned glass for urinal pot partition with complete fittings of SS nut bolts and clamps all as specified and as per manufacturer's instructions.
M & L for 75 mm thick PCC 1:3:6 type C2 as in Plinth Protection using 40 mm stone aggregate including making joints & filling with sand bitumen mastic as per complete all as specified and directed by Engr In Charge.
M &L for removing building materials through trolly etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork of SSR 2020) to a distance of 15km, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engineer-in-Charge.
Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power) complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.
M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling terminated in flush metal box alongwith outer cover plate for mounting modular switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 Sq mm cable including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size for one light/fan/bell point controlled by one switch.
All as per item No 75 above but for one 3 pin 5 amps socket outlet on indipendent board with other switchs.
All as per item No 75 above but for one 3 pin 5 amps socket outlet on the same board with other switchs.
All as per item No 75 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size.
S & F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S & F Modular Socket, 6A - 2/3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S&F Modular switch 1 way 16A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S & F Modular Socket, 16A - 2/3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S & F Modular bell switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fix White cover plate with frame,3 module Complete all as specified and directed by Engineer-in-Charge.
Supply and fix Metal flush box 3 module complete all as specified and directed by Engineer-in-Charge.
Supply and fix Metal flush box 6 module complete all as specified and directed by Engineer-in-Charge.
S&F Single pole and neutral enclosure with two pin and earth plug and socket compete with one SP MCB 20 Amps complete all as specified and directed by Engr-in-charge
M & L for submain wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified. Note:- 2 Runs of 4.0 Sqmm single core and one run of 4.0 sqmm single core cable as earth continuity incld PVC conduit shall be measured as one unit length.
M & L for submain wiring with two run of single core 6.0 sqmm PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified. Note: - 2 Runs of 6.0 Sqmm single core and one run of 6.0 sqmm single core cable as earth continuity incld PVC conduit shall be measured as one unit length.
S&F of LED ceiling light 34 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.
Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.
Supply and fixing MCBs 10 KA breaking capacity, single pole, 240 volts, 6 to 40 amps C Curve capacity.
Supply and fixing MCB SPN 40 Amp , 230 volt, 10 KA complete all as specified and directed by engineer-in-charge.
Supply and fixing in replacement MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge.
M&L for taking down existing exhaust fan carefully without damaging of any size from various rooms and deposit in MES store/ credit complete all as specified and as directed by Engr-in-Charge.
S&F Exhaust fan 300 mm sweep 230 Volt, 1400 RPM with louver including necessary fixing arrangement for proper fixing in wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make-Bajaj Cat No- MAXX AIR or equivalent in Havells/ Crompton Greaves
OMVIN ENTERPRISES LLP
J D ENTERPRISES
JAIPAL and BROS
Mahesh Enterprises
High Tech Metal India
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .