SPECIAL REPAIR OF OR MD ACCN FROM P-335 TO P-342 AT JOGINDER SINGH ENCLAVE NEW CANTT PRAYAGRAJ

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed.

S&F for Pressed Steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

S&F for Pressed Steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

S&F second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, complete all as specified and directed.

S&F second class hardwood Flush shutters 35mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F Factory made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC Sheet to be fitted in the M.S frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing, complete all as specified and directed.

M&L Aluminium (powder coated) Sliding Glazed Shutter with frame of suitable size of 3 track with necessary joining cleats, glazing clips, rubber gasket, aluminium snap beading and locking arrangement at both end complete all as specified and directed. Note : (i) Quotated rates are inclusive of Frame and Glass fitting in panels to windows. (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron. (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE.

S&F of powder coated aluminum windows and ventilator shutter, side hung, openable, casement type with or without sash bar, aluminum section weighing 0.55 Kg/Mtr including necessary joining cleats glazing clips, rubber packing anodised aluminum snap beading, screws anodised aluminum fitting such as peg stays 150mm long, hingus types B-21 100mm long, suitable handle complete all as specified and directed. Note : (i) Quotated rates are inclusive of Frame and Glass fitting in panels to windows. (ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron. (iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE.