Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹17.5 LAccepted-AOC | 1st | Accepted-AOC The lowest bidder M/s Jamna Constructions has been accepted. | |
| 2 | 2nd₹17.7 L+₹5,260.41 (0.30%)Rejected-Finance OFFICE 4 9 SWARG ASHRAM NANAK RAM COLONY PARMANAND CHOWK DELHI 110009 | DELHI | DELHI | DELHI | 110009 | 2nd | Rejected-Finance L2 | |
| 3 | 3rd₹19.1 L+₹1.4 L (8.08%)Rejected-Finance | 3rd | Rejected-Finance L3 | |
| 4 | 4th₹19.5 L+₹1.9 L (10.7%)Rejected-Finance | 4th | Rejected-Finance L4 | |
| 5 | 5th₹19.6 L+₹2.0 L (11.3%)Rejected-Finance | 5th | Rejected-Finance L5 |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
10 Feb 2020, 6:00 pmClosed
GE AWC MHOW
GE AWC MHOW
PROVN OF GUARD ROOM AT MAIN GATE OF DEMO BTY AND PROVN OF HARD STANDING NEAR BLDG NO CC-157 OF AWC UNDER GE AWC MHOW
2020_MES_314548_1
8384 GE(AWC) /MHOW / OF 2019-20
Open Tender
Civil Works
Item Rate
240 days
GE AWC MHOW
All as per tender documents and NIT.
7 documents required · 7 mandatory
₹500
Yes
GE AWC MHOW
₹52,000
Yes
30 May 2020
13 Jan 2020
11 Feb 2020
14 Jan 2020
10 Feb 2020
28 Jan 2020
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/loose Soil all as specified and as directed.
Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed.
Excavating over areas, not exceeding 1.5 m deep and getting out Soft / loose soil all as specified and as directed.
Excavating over areas, exc 1.5 m but not exceeding 3 m deep and getting out Soft / loose soil all as specified and as directed.
Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed.
Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exceeding 1.5m above the starting point Soils all as specified and as directed.
Removing excavated material to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5m above the starting point Soils all as specified and as directed.
M&L Sand filling and spreadng under floors (interlocking tiles) or in foundations or under & over cable including watering and consolidation with material and labour all as specified and as directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface with material and labour. Broken stone or boulders.
M&L Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, with material and labour Broken bricks.
M&L for Cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in surface channels and drains etc complete all as specified and directed.
M&L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in lintels upto 1.5 mm clear span, bends, benching and hold fasts etc complete all as specified and directed.
M&L Providing pre-cast cement concrete B1 type, 1:2:4 (using 20 mm graded aggregrate) in copings, kneelers, apex stones set in CM 1:4 all as specified and directed.
M & L 60mm thick Machine pressed precast conctete interlocking paver block fixing with grey cement and pigments of "I" shape or as approved by GE or any colour and size confirming to IS 15658-2006 of M-35 Grade, laid over 30mm (avg) thick dry sand cushioning, filling of joints with sand & compaction using surface vibrator after filling of joints lain in any pattern as decided by Engg-in-charge including packing of sides by cement concrete finishing surface even and smooth complete all as specified and as directed. NOTE:- Sand cushioning shall be measured and paid separately.
Material and labour RCC M-25 design mix in foundation footing, plinth beam, bases for column and pedestal using 20mm graded curshed aggregate complete all as specified and directed.
Material and labour RCC M-25 design mix in column, pillars, piers, post etc using 20mm graded curshed aggregate complete all as specified and directed.
Material and labour RCC M-25 design mix in beam, roof beam etc using 20mm graded curshed aggregate complete all as specified and directed.
Material and labour RCC M-25 design mix in roof slab etc using 20mm graded curshed aggregate complete all as specified and directed.
Material and labour RCC M-25 design mix in chajja etc using 20mm graded curshed aggregate complete all as specified and directed.
Formwork to sides of concrete foundations footings bases of columns raft and raft beams sides and sofits (if any) of foundation and plinth beams, and similar work vertical or to batter rough finished sufraces of concrete complete all as specified and directed.
Formwork to sides of pillars posts, struts, piers, columns and stanchions rough finished surfaces of concrete Square rectangular or polygonal complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchibngs, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc rough finished surfaces of concrete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work including attached pilasters, buttresses etc vertical or to batter all as specified and directed.
Formwork to Chajjas, troughs and similar items including edges complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.
Description same as per item No. 28.00 but 6 mm to 8 mm dia complete all as specified and directed.
Description same as per item No. 28.00 but 5 mm dia and over upto and including 8mm dia in stirrups spacers amd binders quality confirming to TMT bar complete all as specified and directed.
M&L Brickwork with fly ash bricks, modular size straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 using modular bricks complete all as specified and directed.
M&L Brickwork with fly ash bricks, modular size straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 using modular bricks complete all as specified and directed.
M&L Brickwork with fly ash bricks, modular size straight or curved on plan not exc 6 m mean radius, built in cement mortar 1:6 using modular bricks complete all as specified and directed.
M&L Brickwork with fly ash bricks in one brick thick modular size straight or curved on plan not exc 6 m mean radius, honey-comb walling,built in cement mortar 1:4 complete all as specified and directed.
M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound complete all as specified and directed. Note:- WPC shall be measured and paid separately.
M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth with using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.
Supply only integral water proofing compound complete. Make:- Water Seal rom Acro Paints, Pidlite Industries Ltd, Accorproof from ACC
M & L 12 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and directed.
M & L 5 mm thick rendering on brick work or concrete surface in cement mortar 1:3, on ceiling, below chajja and shelves complete all as specified and directed.
M & L for applying two coat of cement base paint over a coat of Birla or JK white cement primer including prepration of newely plastered surface complete all as specified and as directed. Make of cement base paint:- Super snowce, Duracem, Accrocem
M & L for applying two coat of oil bound distemper over a coat of primer including prepration of newely plastered surface as in wall including 1 mm thick Birla white / JK white putty complete all as specified and as directed. Make:- Berger, Asian Paints, Goodlass Nerolac Paints
M & L for applying three coat of white wash including prepration of surface complete on ceiling under shelves and chajja all as specified and as directed.
M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate in sub floors, sub base floors, laid over PCC sub base and paving etc complete all as specified and directed.
M&L non skid ceramic coloured tiles 300x300x 6to7 mm thick jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make:- Kajaria, Johnson, Orient
M&L glazed ceramic coloured tiles 300x200x 7mm to 8 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Make:- Kajaria, Johnson, Orient
M&L for colour non skid ceramic coloured tiles 395x395x 7 to 8 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Make:- Kajaria, Johnson, Orient
Description same as per item No. 46.00 but in skirting over 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M & L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in alternate ways, surface finished even and fair without using extra cement complete.
S&F framed work as in doors or gates and angle joint, channel, angle or other sections with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors to be prepare for hanging or sliding with and including either and hinges or steel hanging door fittings including steel sheet for door covering, hanging door fittings and hanging also fastening and fixing incl hold fast of Fe-290 (Gde E-165) complete all as specified and as directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars/ guard bars, dovetalied or welded complete all as specified and directed.
Description same as per item No. 50.00 but without glazing bars complete all as specified and directed.
S&F Steel ventilator with top hung shutter including hinges steel, peg stay complete all as specified and directed.
S&F Framed work such as grills, gratings, etc, with ends of bars shouldered and / or riveted, or forged into spikes ; framed guard bars ; barred iron doors ; ladders; framed balusters; walkways ; railings ; framework of water tanks and similar work conforming to Fe-410 complete all as specified and directed.
Supply only 3.0 mm thick Figured Glass, Pin Head Type And Glazing With Oil Putty In Squares Not Exceeding 0.5sq.M In Each Pane complete all as specified and directed.
Description same as per item No. 54.00 but plain glass complete all as specified and directed.
Supply only Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and averagewidth of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F 35 mm Supplying and fixing 35mm thick Glazed and skeleton shutter 2nd class hardwood, open rebated and prepared to receive glass, gauge etc (without sash bars ) edges of framing plain chamfered or rounded into chamfered fitted with cut and mitred beads for securing glass etc size of mambers of shutters as specified.
S&F 35mm thick 2nd class hard wood plain framed panelled shutter (any Nos of panels) with panels of timber flat on both sides (feather edged) or of vencered particle board medium density wood particle borad with commercial face veneers and fitted to chowkhat complete all as specified and directed.
M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surface any description over 10cm width or girth, complete all as specified and as directed. Make:- Asian Paint (Apcolite), Nerolac (Nerolac Full Glass), ICI Paint (Dulux Gloss)
M & L 10 mm thick rendering in CM 1:4 on concrete roof padding / wall surface, cement mortar mixed with and including WPC as per manufacturers instruction complete all as specified and directed. Note:- WPC shall be measured and paid separately.
M&L water proofing treatment on roof surface in following steps through manufacturer/ authorised applicator of the manufacturer instructions complete :- (i) Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction parapets, etc and surface painting, with a layer of blown bitumen of any preparation applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm and lightely tampered (area of flashing etc shall be added to the roof area). (ii) Laying APP based polymeric membrane minimum weighing 3 kg/sqm and min 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iii) Applying a coat of bituminious aluminium paint @200 gm/sqm (min) in two coat.
S&F M & L for preparation of new or previously untreated wood and wood based surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and as directed.
S&F brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make - Cat part No U-0911 of Plumber , Catpart No BAB-400 of Pearl, Cat part No ACN1111NM of Jaquar.
S & F in repair 20 mm dia Powder coated curtain rod fixed with modren bracket of any type or any design as approved by GE complete all as specified and directed.
M&L Providing precast cement concrete 1:2:4 type B-1 in landings cover slabs (for manholes etc.) and set in CM 1:4 complete all as specified and directed.
Material & labour cement concrete 1:4:8, type D-2 bed to drain pipes 110 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F Butt hinges, medium weight, cold rolled mild steel and fixed size of hinges 100mm complete all as specified and directed.
S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises
S&F 150 mm long Aluminium handles, cast type anodised 'D' shaped , 150mm long ISI marked all as specified. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises
S&F 300 mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
Supply only 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S&F vitreous China Orrissa pan with integral foot rest size 580xmmx440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rests any pattern fixed in repair all as spfd including concrete bedding complete all as spfd and direrected. Make Parryware, Cera, Hindware as approved by GE.
S & F Vitreous China Wash hand basin white, flat back, size 550 x 400 mm excluding taps but including brackets and waste fitting and pipe complete all as specified. Make Parryware, Cera, Hindware as approved by GE.
M & L for PVC (SWR) Multi Floor trap of 75 mm outlet with grating including jointing with solvent cement.
S & F 75 mm bore PVC (SWR) pipes single socketed in any length laid in trenches or floors.
Description same as per item No. 75.00 but fixed on wall complete all as specified and directed.
S&F PVC SWR vent cowl 75mm dia bore complete all as specified and directed.
S&F 150x150mm salt glazed stone ware gully graps square or round mouthed type P all as specified.
S&F 110mm bore PVC (SWR) pipes single socketed in any lenth with rubber ring joints,laid in trenches or in floor, complete all as spfd and direrected.
S&F PVC (SWR) bends any radius 110mm dia complete all as spfd and direrected.
S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with asses door complete all as spfd and direrected.
S&F 10 Ltrs capacity PVC flushing cistern of PVC complete all as spfd and direrected.
S&F 15 mm bore steel water tubing med grade galvanised fixed to wall roof floors ceiling etc incl all fittings and fixtures complete all as specified and directed.
S&F 20 mm bore steel water tubing med grade galvanised fixed to wall roof floors ceiling etc incl all fittings and fixtures complete all as specified and directed.
S&F 20mm stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union all as specified.
S&F 15mm angle stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type chromium plated screwed ends for iron pipe or for union all as specified.
S&F 15mm stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type chromium plated with long sank and cup (concealed type) screwed both ends for iron pipe or for union all as specified.
S&F bib tap 15mm cast copper alloy bright clutch or butterfly handlw fancy type chromium plated screwed down for iron pipes all as specified and directed.
S&F pvc connection 15mm size pipe 450mm long with PTMT nuts complete all as spefied and directed.
Supply only 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
S&F swivel shower of PTMT any colour for fixing to steel pipe of 15mm bore all as spfd and directed. Make: Symet(minimum weight 40gms) or equivalent make as approved by GE.
S & F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
S&F 20mm Tubes, 'Light Grade', Galvabused, With All Fitting, Laid In Trenches complete all as specified and directed.
Supply and fix valve, stop valve, screwed , chormium plated fancy type for 15mm dia pipe complete all as specified and as directed.
Supply and fix bib cock chromium plated fancy type, screwed for 15mm dia pipe complete all as specified and as directed.
Solid PVC Door framed of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per speceification & drawings
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top raik & bottom rail. Panelling of plain coloujr PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, all as per specified and directed by Engineer-in -Charge
M&L Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly complete all as specified and directed for one light / fan/ bell controlled by one ,one way switch 5/6 Amps. Make :- V Marc, Polycab, Havell's, RR Kabel
Description same all as per item No 99.00 here in before but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch
Description same all as per item No 99.00 here in before but One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch
M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FRLS copper conductor cable in and including rigid non- metallic PVC concealed / surface conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FRLS copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board complete complete all as specified and directed . Make :- V Marc, Polycab, Havell's, RR Kabel
Supply and fixing modular metal flush box 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)
Supply and fixing modular metal flush box 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)
Supply and fixing modular metal flush box 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)
Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)
Supply and fixing modular white cover plate with frame 6 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)
Supply and fixing modular white cover plate with frame 8 module complete all as specified and as directed. Make:- Anchor , Legrand,Crabtree (Havell's)
S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V . Make:- Anchor , Legrand,Crabtree (Havell's)
S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)
S & F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)
S&F switch socket combination modular type multipurposes 6/16 A, 3 module complete all as specified and directed. Make:- Anchor , Legrand,Crabtree (Havell's)
S & F wall mounted LED batten ,extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 W LED fitting 4 feet long complete all as specified and directed. Make:-Havells cat part No- cat No :-LUMILINEPLUSBS 20WLED865SPCSS / WIPRO cat part No :- D532065 /Bajaj Cat part No:-112785
S & F LED street light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete all as specified and directed. Make:- Havells Cat No. ENDURACITYLITEPLATPLUSSL 30WLED757SASYBOPC / WIPRO cat part No :-LR02-291-XXX-57-XX / Bajaj Cat part No:-169887
Supply and fixing MCB DB, SPN, double door 8 ways, 240 volts capacity complete all as specified. Make : L&T Cat No :-DBSPN008DD HPL Cat pt No- DBECOTDD08 / Indo Asian Cat No-811806
Supply and fixing MCB DP 40 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB20400C HPL Cat pt No- TSPNC40 / Indo Asian Cat No-811152
Supply only MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T Cat No :-BB10320C HPL Cat pt No- TSPC6-32 / Indo Asian Cat No-811129
S&F exhaust fan AC single phase 230 volt 300 mm sweep, 900 RPM with louver complete all as specified and directed. Make:- Bajaj Model Supreme Plus Cat No.-70069 / Havells model Turbo Force SP / Usha Model Turbo Heavy Duty
Supply and fixing ceiling fan complete with electronic type regulators and accessories 230 volt, 1200 mm sweep , 50watt, 340 RPM Air delivery 210 CMM ,5 star rated complete all as specified Make:- Bajaj model speed star Cat No:- 250917, Havells model Velocity HS, Crompton model Aura Prime.
Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to 32 x 6mm GI earth strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.
S & laying reinforced precast concrete cable cover class LV, type 1 flat, size 250x150mmx40mm.
Supply, laying or fixing, jointing and testing LT under ground electric power cable of size 10 sqmm, 2 core. Crossed linked polyethylene (XLPE Cable ) insulated, galvanised steel strip or wire armoured, ISI -7098 Marked. With aluminium conductor multi stranded , heavy duty 1100 Volts grade complete all as specified laid in tenches / laid under floor or fixed with walls/ on poles/ in ducts/ in GI pipes etc including taking down existing complete all as directed at site. Make:- Finolex,RPG(Asian),RR Kable, Universal
S & F sheet metal enclosure with two pin and earth plug with one single pole MCB 20 amps, 240 volts complete all as specified and directed. Make:- Havell's, HPL, L&T
Supply and fix water heater storage type ,electric , capacity 25 liters ,2000 Watt, powder coated metal body , adjustable themostat , magnesium anode of extra ptotection from corrosion and lekage and unique temperature indicator dial including PTMT connections 15 mm size with nuts and length of 450 mm complete all as directed. Make:- Bajaj model New shakti Cat No:-150743, Havells Model Monza DX cat no:- GHWAMGTWH025, Crompton Greaves model Arno Dlx Cat no:- ASWH1425
M/s Himgiri construction
M/s Gupta Constructions
ms shrilaxminarayan and sons
Goyal Construction
M/S UnitedConstruction
KAILASH CHANDRA KHANDELWAL
yash enterprises
Bharadwaj Builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .