MISC REPAIR TO WOODEN FURNITURE UNDER GE NARANGI

Amount

REPAIR TO SIDE BOARD /BOOK CASE / BIN SOILED LINEN MULTI PURPOSE (DRG NO. FD-26/241, FD-287, FD/E6/MAP/09)

Removing the existing unsv/ broken shutter of side board and supply and fix new shutter made of 18 mm thick prelaminated particle Board Exterior Grade with 40 mm wide brass coated continious piano hinges including aluminium anodised bow handle 100 mm long, 02 Nos knob and magnet to stick the doors alongwith teakwood beading 6mm thick all around, complete all as specified and shown in drg. (Each leaf to be measured separately).

Removing the unserviceable broken back ply of side board and supply and fixing new 6 mm thick BWR grade plywood all as specified and shown on drg.

Removing the unserviceable/ broken drawers of side board and supply and fixing new drawers made of front 18 mm thick prelaminated MDF Board Exterior Grade and bottom of drawer with 6 mm thick BWR grade plywood duly fixing of 40 mm knob all as specified and shown on drg.

Material and Labour for preparation of surface and French polishing to side board inner and outer except prelaminated portion all as specified and directed.

REPAIR TO TABLE DINING 6 PERS (Drg No FD-30/239/273 & 376)

Removing the existing unsv/ broken top of Table dining 6 pers and supply and fix new top of prelaminated MDF Board exterior grade of 18 mm thick both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified and directed.

Removing the existing unsv/ broken top long rails of Table dining 6 pers and supply and fix new long rails made of 1st class hard wood of size as shown on drawing complete all as specified and directed.

Removing the existing unsv/broken top short rails of Table dining 6 pers and supply and fix new short rails made of 1st class hard wood of size as shown on drawing all as specified and directed.

Removing the existing unsv/ broken legs of Table dining 6 pers and supply and fix new legs made of first class hard wood all as specified and shown on drg.

Material and Labour for preparation of surfaces and applying French polishing to Table dining 6 pers except laminated portion all as specified and directed.

REPAIR TO TABLE DRESSING LADIES (Drg No FD-32/251 & 378/FD/MAP-II/07)

Removing the existing unsv/ broken drawers of Table dressing ladies and supply and fix new drawers front and sides made of 18 mm thick prelaminated MDF board and bottom of drawer with 6 mm thick BWR grade plywood duly fixed with aluminium anodised knobs 40 mm all as specified and shown on drg.

Removing the existing unserviceable/ broken mirror with 6mm thick back plywood of Table dressing ladies and supply and fix new mirror of 5 mm thick suitable to the existing frame alongwith 6mm thick BWR grade plywood back all as specified and shown on drg.

Material and Labour for preparation of old surface and French polishing to Table dressing ladies except laminated portion all as specified and directed.

REPAIR TO TABLE DINING 1200 x 900MM (Drg No FD-273, FD/MAP-II/03)

Removing the unserviceable /damaged top of table dining and supply and fixing new top made up of 18 mm thick pre-laminated particle Board exterior grade both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified and directed.

Removing the unserviceable /broken legs of table dining and S&F new leg made of 1st class hard wood all as specified and as shown on drg. Note: Each leg will be measured separately.

All as per item No 4.02 here-in-before but top long rails of table dining all as specified and directed. Note: Each rail will be measured separately.

All as per item No 4.02 here-in-before but top short rails of table dining all as specified and directed. Note: Each rail will be measured separately.

Preparation of old surface and french polishing to table dining complete all as specified and directed.

REPAIR TO TABLE 900x600x760 MM W/O DRAWER (Drg No FD 42/284)

Removal of unserviceable leg and S&F new leg made of 2nd class hard wood for table Size complete all as specified & shown on drg.

Removal of unserviceable long stiffener under the top & supply and fixing new long stiffener made out of first class hard wood for table Size all as per drawing and complete all as specified and directed.

Removal of u/s top & supply and fixing new top made out of 18 mm thick prelaminated particle board of size 900x600mm Exterior Grade with teakwood beading 6mm thick half round all around, complete all as specified and directed.

Material and labour for french polishing of complete table exposed to view except laminated portion complete all as specified and directed.

REPAIR TO TABLE 900x600x760 MM WITH DRAWER (Drg No FD-41,224,283)

Removal of unserviceable leg and S&F new leg made of 1st class hard wood for table Size all as per drg and complete all as specified and directed.

Removal of unserviceable top long rail and supply & fixing new front top long rail made out of first class hard wood for table Size all as per drg and complete all as specified and directed.

Removal of unserviceable long stiffener under the top and supply & fixing new long stiffener made out of first class hard wood for table size all as per drg and complete all as specified and directed.

Removal of unserviceable drawer and supply & fixing new drawer front and sides made out of 18mm thick prelaminated particle board with 6mm thick (BWR Gde) plywood at the bottom of drawer with aluminium anodised knob of approved quality all as per drg and complete all as specified and directed.

Removal of unserviceable stiffener and S&F new stiffener to accommodate drawer made out of first class hard wood for table Size all as per drg and complete all as specified and directed.

Removal of unserviceable top and S&F new top made out of 18 mm thick MDF Board exterior grade of 18mm thick both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified and directed.

Material and labour for french polishing of complete table exposed to view except laminated portion complete all as specified and directed.

REPAIR TO TABLE BED SIDE (Drg No FD-276, 248)

Removal of unserviceable plywood at back of table bed side and supply & fixing plywood 6mm thick BWR Gde as per drg and complete all as specified and directed.

Material and labour for french polishing of complete table exposed to view except laminated portion as per drg and complete all as specified and directed.

Removal of unserviceable Top and supply & fixing new top of size 230mm X 450mm made out of 18mm thick MDF board (exterior gde) with teak wood beading 6mm thick half round all around the top as per drg and complete all as specified and directed.

REPAIR TO TABLE WRITING (Drg No FD- 33, 249 & 275)

Removal of unserviceable leg and supply and fixing new leg made out of first class hard wood leg made out of 35mm x 55mm x 720mm in finished state as per drg and complete all as specified and directed.

Removal of unserviceable knob/handle of drawer and supply & fixing new aluminium anodised knob heavy duty of quality as per sample available as per drg and complete all as specified and directed.

Removal of unserviceable side of cabinet of table and supply & fixing new side of cabinet made out of Prelaminated MDF board 18mm thick ext gde as per drg and complete all as specified and directed.

Taking out unserviceable shutter of cabinet and supply & fixing new shutter made out of MDF board (Ext Gde) 18mm thick duly covered with 6mm thick teakwood beading with mild steel chromium plated piano continuous hinges through out with MS screw of appropriate size as per drg and complete all as specified and directed.

Removal of unserviceable top and supply & fixing new top of size 1145mm x 600mm made out of MDF Board exterior grade of 18mm thick both side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified and directed.

Material and labour for french polishing of complete table exposed to view except laminated portion all as specified and directed.

REPAIR TO TABLE 900x900x760 MM W/O DRAWER (Drg No FD-88M)

Removal of unserviceable leg and supply & fixing new leg made of first class hard wood (teak wood) for table size all as per drg and complete all as specified and directed.

Removal of u/s top long rail and supply & fixing new front top long rail made out of first class hard wood for table size all as per drg and complete all as specified and directed.

Supply and fixing extra H type stiffener made out of first class hard wood (teak wood) of size 30X30 mm complete all as specified and directed.

Removal of u/s top and supply & fixing new top made out of 18 mm thick MDF Board exterior grade one side laminated duly covered with teakwood beading 6mm thick half round all around, complete all as specified and directed.

Material and labour for french polishing of complete table exposed to view except laminated portion complete all as per specified and directed.

REPAIR TO CHAIR EASY (Drg No FD-17(M),202 & 229)

Removing the existing unserviceable/broken rear leg and supplying and fixing first class hard wood rear leg complete all as specified and shown on drg. Note: Each leg measured separately.

Removing the existing unserviceable/broken front leg and supplying and fixing first class hard wood front leg complete all as specified and shown on drgs. Note: Each leg measured separately.

Removing the existing unserviceable/broken arms rest and supplying and fixing first class hard wood arms rest complete all as specified and shown on drgs. Note: Each arm rest measured separately.

Material and Labour for french polishing to wooden surfaces for repaired chairs (old and new surfaces) complete all as specified and shown on drgs.

REPAIR TO CHAIR DINNING (Drg No FD-16,FD-228 & FD- 279)

Removing the existing unserviceable/Broken rear leg and supply & fixing first class hard wood rear leg complete all as specified and shown on drgs. Note: Each leg measured separately.

Removing the existing unserviceable/ broken front leg and supply & fixing first class hard wood front leg complete all as specified and shown on drgs Note: Each leg measured spearately.

Removing the existing unserviceable/ broken fillet of canning and supply & fixing first class hard wood fillet for canning including drilling holes at 12.5 mm c/c complete all as specified and shown on drgs.

Removal of unserviceable back rest batten and supply & fixing new back rest batten made out of first class hard wood of size as per drg complete all as specified and directed.

Material and Labour for french polishing to wooden surfaces for repaired chairs (old and new surfaces) complete all as specified and shown on drgs.

REPAIR TO CHAIR WRITING (Drg No FD-20, FD-250 & FD- 280)

Removing the existing unserviceable/ broken rear leg and supply and fixing first class hard wood rear leg complete all as specified and shown on drgs Note: Each leg measured separately.

Removing the existing unserviceable/ broken front leg and supply and fixing first class hard wood front leg complete all as specified and shown on drgs Note: Each leg measured separately.

Removing the existing unserviceable/broken arms rest and supply and fixing first class hard wood arms rest complete all as specified and shown on drgs. Note: Each arms rest measured separately.

Material and Labour for french polishing to wooden surfaces for repaired chairs (old and new surfaces) complete all as specified and shown on drgs.

REPAIR TO CHAIR WOODEN BOTTOM (Drg No FD-56,FD-225 & FD-285)

Removing the existing unserviceable/ broken seat ply and supply and fixing new seat made out of 6 mm ply wood commercial veneered face of both sides including drilling holes complete all as specified and shown on drgs. Note: Complete seat of one chair measured separately.

Material and Labour for french polishing to wooden surfaces for repaired chairs (old and new surfaces) complete all as specified and shown on drgs.

REAPIR TO CHAIR DINNING WITH PVC SEAT (Drg No FD/MAP-II/05)

Removing the existing unserviceable/Broken rear leg and supply and fixing first class hard wood rear leg complete all as specified and shown on drgs. Note: Each leg measured separately.

Removing the existing unserviceable/ broken front leg and supply and fixing first class hard wood front leg complete all as specified and shown on drgs. Note: Each leg measured spearately.

Removing the existing unserviceable/ broken PVC Seat of Chair Dining and supplying and fixing new PVC Seat of Make Swastic/Harmony or equivalent complete all as specified and shown on drgs.

Removal of unserviceable back rest batten and supply and fixing new back rest batten made out of first class hard wood of size as per drg complete all as specified and directed.

Material and Labour for french polishing to wooden surfaces for repaired chairs (old and new surfaces) complete all as specified and shown on drgs.

COMMON ITEMS FOR CHAIRS (Drg No (FD-17,20,250 & 280) (FD-16,228 &279) (FD-202, 229))

Removing the existing unsv/ broken plastic cane suplying and canning with new plastic cane 2 mm wide and 4 mm for borders for canning of chair of all types including couch with detachable chair, bin soiled linen, stool dressing complete as per Godrej pattern all as specified and shown on drgs.

Supply & fix stiffeners for chairs made out of 25 X 25 mm first class hard wood after removing the existing unserviceable stiffeners complete all as specified and as shown on drgs.

FRENCH POLISHING TO WOODEN FURNITURE (Drg No FD/E6/MAP/09, FD-27(M) & DB-4120)

Material and labour for smoothening surface with sand paper of bin soil linen for multipurpose for repolshing the old polished surface with one coat of french polish complete all as specified and directed.

Material and labour for smoothening surface with sand paper of stool dressing for repolshing the old polished surface with one coat of french polish complete all as specified and directed.

Material and labour for smoothening surface with sand paper of Table office clerk wooden for repolshing the old polished surface with one coat of french polish complete all as specified and directed.

REPAIR TO CHAIR DINNING CUSHIONED (Drg No FD/MAP-II/04)

Removing the existing worn out seat cushion and supply & fixing new PU foam seat foam of size 450x450x75mm thick, density 40 Kg/Cum with 12mm thick plywood BWR grade phenol bonded covered with taperstry cloth for chair dining cushioned complete all as specified and shown on drawing. Note:-Taperstry cloth shall be approved by GE

Material and labour for preparation of surfaces and french polishing to wooden surfaces for repaired chairs and applying two or more coats of French polish on new suraces and one coat on old surfaces to match uniform shade complete all as specified and shown on drawing.

REPAIR TO TABLE CENTRE/PEG TABLE/TEAPOY (Drg No FD-274, FD-277, 384, FD-382)

Removing the existing unserviceable top of table centre and supply & fixing new top made out of 18 mm thick pre laminated MDF board exterior grade duly edging with 6mm thick beading including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and shown on drawing.

All as per item Ser No 18.01 above but top of Peg Table.

All as per item Ser No 18.01 above but top of Teapoy

REPAIRS TO SOFA SET 4/5 SEATER SEAT (Drg No FD-281)

Replacement of existing foam cushions of Sofa set 04/05 seater including existing tapestry cloth of sofa set 4/5 seater and supply & fix new PU Moulded Foam 32 kg per cubic meter density of size 560 x 535 x 100mm thick, duly stitched with tapestry cloth and closed with valcrow of suitable size complete all as directed and shown on drg . Make: Sleepwell, Kurlon or equivalent as approved by GE Note: Tapestry cloth shall not be less than Rs. 400.00 Per RM.

Replacement of tapestry cloth of cushions of sofa set 4/5 seater, seat and back and supply & fix new tapestry cloth size 560 x 535 x 100mm thick on existing foam cushion with valcrow on one edge of best quality complete all as specified and directed. Note:- The cost of tapestry cloth to be not less than Rs 400/- per meter.

Removing unsv long rail of front or back side of three seater sofa set and supply and fix new long rail made out of first class Hard Wood of size 1590x100x35mm duly french polished complete all as specified and as shown on drgs.

Removing unsv short rail of any side of sofa set 4/5 seater and supply and fix new short rail made out of first class Hard Wood of size 525x100x35mm duly french polished complete all as specified and as shown on drgs.

Removing unsv wooden bearers of any side of sofa set 4/5 seater and supply and fix new wooden bearers made out of first class Hard Wood of size 525x40x40mm duly french polished complete all as specified and as shown on drgs.

Removing unsv wooden Arms of any side of sofa set 4/5 seater and supply and fix new wooden Arms made out of first class Hard Wood of size 525x40x40mm duly french polished complete all as specified and as shown on drgs.

Material and labour for smoothening surface with sand paper of Sofa set five seater for repolshing the old polished surface or unpolished surface of sofa with one coat of french polish both above and below the sofa complete all as specified and directed.

Material and labour for smoothening surface with sand paper of Sofa set four seater for repolshing the old polished surface with one coat of french polish complete all as specified and directed.

REPAIRS TO STOOL DRESSING CUSHION (Drg No FD/E6/MAP/14)

Replacement of existing foam cushions of Stool dressing cushion seat including existing tapestry cloth of Stool dressing cushion seat, and supply & fix new PU Moulded Foam 50-55 kg per cubic meter density of size 400 x 330 x 80mm thick, duly stitched with tapestry cloth and closed with valcrow of suitable size complete all as directed and shown on drg . Make: Sleepwell, Kurlon or equivalent as approved by GE Note: Tapestry cloth shall not be less than Rs. 400.00 Per RM.

REPAIR TO BED PLY WOOD TOP (Drg No FD-21/245/246)

Removing the existing unserviceable/ broken long rail and supply and fixing new first class hard wood long rail for charpoy wooden including French polishing all as specified and shown on Drg. Note:Each long rail measured separately.

Removing the existing unserviceable/broken head board including legs and supply & fixing new head board for bed ply wood top including teak wood legs and French polishing complete all as specified and shown on drg

Removing the existing unserviceable /broken foot board including legs and supply & fixing new foot board for bed plywood top including teak wood legs and French polishing complete all as specified and shown on Drgs.

Removing the existing unserviceable /broken ply wood top and supply and fixing new 12 mm thick BWR plywood exterior grade complete all as shown on Drg and as specified.

VENUS TRADING CORPORATION

M.G. ENTERPRISE

shekhar & company