SPECIAL REPAIR TO BLDG NO P-131 UNDER GE(CENTRAL) KHADKI

Amount

Dismantling Single or double layer Mangalore pattern or similar tiles on ridge/roofing at any height complete all as specified and as directed.

M & L for roof tiles, mangalore pattern, interlocking at side joints laid dry single layer or similar tiles in roof coverings complete all as directed.

M & L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as directed.

S & F for second class hard wood clean sawn battens at 30 cm centre to centre and sectional area exceeding 15 Sqcm and not exceeding 25 Sqcm including creosote oiling two coats including dismantling Battens for tiles ,singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed.

S & F 2nd class H/W plain fillets, rails, rafters, purlins, square, rectangular in section clean sawn secured with nails brads exc 13 sqcm but n exc 25 sqcm including creoste oiling two coats including dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section (Unframed work) in any position complete all as specified and as directed.

Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description framed work or unframed work.

M & L at any height for timber fixing second class hardwood clean swan in scantlings unframed work necessary fittings complete all as directed.

Ditto- all as per item 07 above but except scantlings

S&F 2nd class hard wood 20mm thick, Boarding in roofs, ceilings, partitions, fascia barge, soffits (except flooring and skirting) planned one side, and similar work including dismantling complete all as specified and directed by Engr In charge.

S & F 0.63mm thickness Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 etc complete all as specified and directed by Engr In charge.

S & F for plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) by using 0.80mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar in including all quoins, arches, pillars, walls, water staging etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-In-charge.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in, built in in CM 1:4 complete all as specified and directed by Engr In charge.

M & L for rendering 15 mm thick on fair faces on stone/ block masonry surfaces on walls in CM 1:4 finished even and smooth complete all as spd and directed.

M & L for rendering 15 mm thick on fair faces on stone/ block masonry surfaces on walls in CM 1:6 finished even and smooth complete all as specified and directed by Engr In charge.

M & L preparation of new plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over a coat primer complete all as specified and directed by Engr In charge.

M & L preparation of new plastered wall surfaces applying two coats of cement based paint over coat of alkali resistant priming paint complete all as specified and directed by Engr In charge.

M & L for preparation of new or previously untreated wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr In charge.

AMW Construction and developers

V.R.PRAJAPATI AND CO.

M/S JAYCONSTRUCTION CO

Aishwarya Constructions

MANIYA CONSTRUCTION CO

MAHESH DADAJI BACHHAV

bhardwaj enterprises