RE-APPROPRIATION AND ADDN/ALTN OF BLDG NO 1 WEATHER SHELTER AT DIPAC INTO TEMPORARY OFFICE SPACE FOR DEFENCE SPACE AGENCY CVD COMPLEX DELHI CANTT-10

Amount

Demolition of Brick masonry built in cement mortar including all quions, arches, pillar etc but excluding ashlar facings, complete all as specified and as directed.

M&L for bricks work with fly ash bricks, Modular in cement mortar 1:4, staight or curved on plan exc 6m mean radius, built in complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surface of walls & apply two coat of cement base paint over a coat of chalk whiting complete all as specified and as directed

M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings n.exc 15cm thick (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate) as in flooring complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing), removing tiles and rubbish off the premises complete all as specified and as directed.

M&L for vitrified ceramic coloured tiles 10 mm thick (square/rectangular) area of each tile n.exceeding 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Dismantaling plain or corrugated / profile steel sheeting any gauge, thickness including nainital or similar pattern roof covering complete all as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified and directed.

Dismantling of wall/ceiling board, any description, including fillets in any position, complete all as specified and as directed.

S&F of Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanger 4mm dia (upto 1200mm lenth)made out of GI flat 40x3mm size of 60cm long with expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed.

S&F of 10mm thick PVC insulation panels with EPS stuck to 1mm printer PVC sheet suitably placed in false ceiling grid made of Aluminium/GI/MS complete all as specified and directed.

S&F of 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work, complete all as specified and as directed.

S&F of moulding as in cornices, picture rails and the like area exc. 6 sqcm & n.exc 13 sqcm for 1st class hardwood, complete all as specified and as directed.

S&F for factory made uPVC white colour three track track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of big series frame 116x45 mm & sash 46x62 mm both having wall thickness of 1.3+ 0.20 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.20 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profiles), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hooks, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G I fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixixng frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engr-in-charge.( Glass or wiremesh shall be paid separetely) Note: For uPVC frame and sash extruded profiles minus 5% tolearnce in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F for 5.50mm thick sheet glass ordinary quality square exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F for stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire complete all as specified and directed.

S&F of Powder coated aluminium doors using 96.6 mm X 44.8 mm X 1.60 mm aluminium chowkhat, with 84 mm X 44.7 mm X 1.60 mm section vertical stile, with 101.60 mm X 44.8 mm X 1.60 mm rail mounted on floor spring with mortice lock (Make- Harrison), with aluminium tower bolts 150 mm long (02 nos), sliding bolt 300 mm long (01 no), door handle 150 mm long (02 nos) and fittings all as directed by Engr-in-Charge. Bottom panel with 12 mm thick laminated nova pan and top panel with 5.5 mm thick plain/froasted sheet glass with rubber beading of suitable size, complete all as specified and as directed.

S&F of aluminium anodised powder coated partition as all of aluminium section 100mm X 44mm X 2mm thick frame rectangular section & panel of 5mm thick PVC sheet in top & bottom pannel & 5.5mm thick pin headed sheet glass in middle panel with rubber linning & aluminium beading around length necessary fixing arrangements for bottom & top member of aluminium frame in floor / PCC /brickwork as per site requirement with rawl plug etc including chromium plated steel screws 60cm c/c including taking down old aluminium partition, complete all as specified and as directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.

All as per Srl item 25 here-in-before but 5mm dia and over and upto and incl 10mm dia in stirupps spacers and binders complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams , beam haunching girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed

M&L for RCC nominal mix concrete using 20 mm graded stone aggregate type B1 1:2:4 as in beams, lintel complete all as specified and dirceted

M&L for RCC nominal mix concrete using 20 mm graded stone aggregate type B1 1:2:4 as in Chajja complete all as specified and dirceted

M&L for marble of any shade 18 to 20mm thick table rubbed and polished as in skirkting/dado/window cill/jambs, vertical surface over cement rendering and jointed with grey cement over and including screed bed of 15mm thick in CM 1:4, including pointing in white cement (1:2) using marble dust admixture of pigment to match with the shade of marble and making nosing at right angle corner complete all as specified and directed.

E/M PORTION

M&L for point wiring with single core PVC sheathed 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with GI saddles GI screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof ) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size on terminal boxes with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly for one light/Fan/exhaust fan point controlled by one Switch complete all as specified and as directed.

All as per Srl item No 33 here-in-before but for 3 pin 5 Amps socket out let on independent board and different wall controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 33 here-in-before but for one 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and directed

All as per Srl item No 33 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified & directed by-in-Charge. Make of cable: Finolex, Make of Conduit Plaza

S&F of modular switch flush type, 6 Amps one way, Single pole, 230 volts AC complete all as speicified and directed

S&F of modular switch flush type, 16 Amps one way, Single pole, 230 volts AC complete all as speicified and directed

S&F of modular socket outlet 6 Amps 2&3 pin combined, 230 volts AC complete all as specified and directed

S&F of multi purpose modular socket outlet 16 Amps, 6 pin combined, 230 volts AC complete all as specified and directed

S&F of ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed

Supply and fixing of LED recessed mounting square slim LED down lighter 36 Watt for AS/GB/POP ceiling 2'x2' size complete with internally prewired and connecting up with twin core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and Fixing of flush mounting factory made TPN DB's MCCBs as incomer and SP/TP MCBs as outgoing ,IP-43 Protection -IK 09 with metal double door with with 200 Amps copper busbar with 2 neutral bas bar ,earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing for provision of 100 Amp MCCB as incomer and SP/TP MCB;s as out going 4 way complete all as specified and as directed.

Supply and Fixing of flush mounting factory made TPN DB's MCBs as incomer and SP/TP MCBs as outgoing ,IP-43 Protection -IK 09 with metal double door with with 200 Amps copper busbar with 2 neutral bas bar ,earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing for provision of 63 Amp MCB as incomer and SP/TP MCB;s as out going 4 way complete all as specified and as directed.

S&F of MCCB 4 pole 415 volt, 50 HZ,100Amps ,25 KA. complete all as specified and as directed.

Supply & Fixing of MCB TPN, 10 KA, 40 to 100 Amps 50 Hz complete all as specified and as directed.

Supply and fixing of MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series complete all as specified and as directed.

Material and Labour for sub main wiring complete with 4 single core multi stranded copper conductor 10 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 10 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia PGI funnel and wire mesh all as shown in electrical plate No 5 of SSR Part-I connected to ear thing test point all as specified or indicated including testing on completion complete all as specified and as directed.

Supply and laying or fixing or passing through existing duct/pipe, 1100 Volts grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed 70 Sq mm 3.5 core nominal cross section stranded conductor complete all as specified and as directed.

AIR CONDITIONING

Supply, Installation, commissioning and testing of Inverter Technology Hot & Cold Split Type wall mounted Air Conditioner (indoor & outdoor unit with cordless remote control unit) of Capacity not less than 1.5 TR, minimum BEE 3 Star rating, fitted with rotary compressor, Refrigerant type R-410A/R-32, Rated cooling capacity rated (6450/7033 Watts) including PVC FRLS grade multi stranded copper conductor cable 4 core 2.5 Sqmm for connections with outdoor unit, powder coated brackets/Chowki stand for outdoor unit, clamps, nuts, bolts washers drilling holes on walls/ceiling for connection/drain pipes and making good the disturbed surfaces of wall/ ceiling with cement mortar, white cement and painting work to match the existing surfaces of walls complete all as specified and as directed.

Supply, Installation, testing and Commissioning of voltage stabilizer for automatic operation single phase, wall mounted ,Copper wounded ,Air cooled with digital display designed for input variation between 160 Volt to 260 Volt with output voltage 220 + 9% Volt with Calibration accuracy + 3% with high low cutoff , Intelligent time delay facility and of capacity 4.0 KVA complete all as specified and as directed.

Supply & fixing of heavy duty copper pipe of size 1/2" dia/ bore complete including insulation brazing, welding, nuts, bolts and screws of required size complete all as specified and as directed.

Supply & fixing of heavy duty copper pipe of size 1/4" dia/ bore complete including insulation brazing, welding, nuts, bolts and screws of required size complete all as specified and as directed.

S&F of PVC drain pipes of suitable size 20 mm complete all as specified and as directed.

Supply and fixing of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket with one single pole MCB 20 amps complete all as specified and as directed.

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 4.0 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 4.0 sqmm size as earth wire drawn in same conduit complete all as specified and as directed.

SURESH KUMAR SHARMA & CO (BID ID -3264701)

M/S Hind Constructions (BID ID -3259786)

M/s Vijay Enterprises (BID ID -3264982)

HANUMAN BUILDERS (BID ID -3259184)