CERTAIN REPAIR TO PLASTER FLOORING TILING JOINERY ETC AND PERIODICAL SERVICES AT HQ PUPSA OFFICERS MESS AND APPT HOUSES DSOI COMPLEX UNDER AGE BRI OF GE NORTH MEERUT CANTT

Amount

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc and precast concrete articles built in cement mortar complete all as specified and as directed.

M&L for Brickwork with sub class 'B' old size bricks, (Clay burnt bricks) straight or curved on plan exceeding 6m mean radius, built in Cement mortar 1:6 complete all as specified and as directed.

All as per Srl item No 2.00 here-in-before but except bricks complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris and rubbish from the site complete all as specified and as directed.

M&L for 15 mm thick plastering in cement mortar 1:6 on brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick plastering using ready mix plaster bags in cement mortar 1:4 on brick / concrete surfaces of external walls finished even and fair, using integral water proofing compound @ 3% by weight of cement or as per manufacturer instructions, including provision of Integral water proofing Compound complete all as specified and as directed. Note: Cost of Integral waterproofing compound shall deemed to be included in quoted rate.

M&L 5 mm thick plastering on ceiling concrete surfaces, in cement mortar 1:3, finished even and smooth complete all as specified and as directed.

M&L complete removal of existing treatment from wall surface using mechanical Scrubber complete all as specified and as directed.

M&L for applying one coat of alkali resistant priming paint using roller complete all as specified and as directed.

M&L for applying 2mm thick cement based wall care putty and making smooth surface complete all as specified and as directed.

M&L for Two coat of oil bound distemper using roller complete all as specified and as directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 Sqm over new surfaces using roller for painting complete all as specified and as directed.

M&L for preparation of Old wall surfaces and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparation of Old wall surfaces and apply one coat of cement base paint complete all as specified and as directed.

M&L preparing plastered Old surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for Preparing old Plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

Preparing old Plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for Preparing old Plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion over and including 2mm thick cement based wall care putty to match with the existing finish or as approved complete all as specified and as directed.

M&L Preparation of old painted wood and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and as directed.

Dismantling structural/framed steel work of any description as in purlin, rafter, grills, grating doors etc. complete all as specified and as directed.

M&L for Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats similar work conforming to Fe 410 -W (Gde E- 250) quality A etc complete all as specified and as directed.

M & L in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F MS angle iron as in door framed work conforming to Fe 290 (Gde E-165) including hold fast tie rod, hinges with one shop of red oxide primer etc complete as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint, over and including a coat of red oxide premier complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and as directed. Note :- Quoted Rate shall also deemed to be inclusive of necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces and repair to match with existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 Sqm each, complete all as specified and as directed. Note :- Quoted Rate shall also deemed to be inclusive of necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces and repair to match with existing surfaces.

Taking down shutters of any description exceeding 1.00 but not exceeding 2.00 Sqm each leaf, including builders hard ware fittings complete all as specified and as directed.

M&L for aluminium Powder Coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/RM (minimum) including stainless steel mosquito proofing wire mesh fixed with clips, frame, necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black plain glass complete all as specified and as directed.

M&L for aluminium Powder Coated of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminium sections weighing 0.55 Kg/RM including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, anodised aluminium Complete fittings including S&F 5.50 mm thick black plain glass complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) not exceeding 0.5 Sqm from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F Glazing with sheet Glass, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed.

All as per Srl item No 39.00 here-in-before but fixed in repairs complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed.

S&F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Molded WPC door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg / Cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and as directed. Note:- stainless steel butt hinges and necessary screws shall be paid separately

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg / Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or stainless steel dash fasteners shall be paid for separately). Note :- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

M&L for 1st class wood hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F Decorative laminate of choice color & Pattern to flush door etc and pasting with synthetic adhesive complete all as specified and as directed.

S&F 30 mm thick, 2nd class hard wood, Glazed and Skelton shutters, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing wire mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) complete all as specified and as directed.

S&F butt hinges, 100 mm size, stainless steel, Medium weight complete all as specified and as directed.

S&F 200 mm long, stainless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolt length of bolt 200mm with dia of shoot / bolt 12mm complete all as specified and as directed.

S&F 300 mm long stainless steel, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed. complete all as specified and as directed.

S&F 125mm size extruded, stainless steel handles, fabricated type polished , complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panilling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing shown on page 178 of SSR Part-II complete all as specified and as directed.

S&F in repair 5 mm thick, sandwich pattern, PVC Wall lining, consisting of wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm PVC fillets complete all as specified and as directed.

Dismantling floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L Non skid colored ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or colored cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for light shade, vitrified tiles, 8 to10 mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tiles and over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

M&L for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tiles and over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic colored tiles of size 350X250X7mm/450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or colored cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar 1:4, complete all as specified and as directed.

S&F in repair 18/19mm thick Solid WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with SS screws to WPC frame work, as in cup boards, rebated or flat edged including S&F fancy handle, Magnate catcher, locking arrangement etc complete all as specified and as directed.

S&F in repair Maple wood flooring using 21 mm thick Prime Grade Hevea Floorboard with German Polish, Mix Grade, North American Hard Maple wood Floorboard, Rubber Pad 18mm - EPDM, SPF Runners 45mm x 70mm, European Floorboard 21mm and Finishing Imported Water based Lacquer, all as per WSF Specifications and manufacturer's specification complete all as specified and as directed.

M&L for applying 15 mm thick cement based Hard Plaster system confirming the requirement of WSF consisting of a Base Coat and a Finish Coat of a total 15 mm thickness and coated with imported washable paint system all as per WSF Specifications and manufacturer's specification complete all as specified and as directed.

S&F in repairs Tin sheet of 21 SWG being fitted on the bottom side of Front Wall of Squash Court, total height 480mm inclusive of wooden frame, all as per WSF Specifications and manufacturer's specification complete all as specified and as directed.

GAME LINE MARKING: M&L for Game Line Marking for squash Court, in Red Colour all as per WSF Specifications and manufacturer's specification complete all as specified and as directed.

S&F in repairs GLASS WALL "Clear Tough” free standing and maintenance free glass back wall system confirming the WSF requirement made of 12 mm micron clear toughened glass with 4 panels 1 door, 4 fins, fixtures & fittings and all other materials for erecting the glass wall system. The height of the glass wall shall be 2130 mm above the finish floor level all as per WSF Specifications and manufacturer's specification complete all as specified and as directed.

Note for item No 61.00 to 65.00: All work of Squash Court shall be carried out by Specialized firm as approved by the GE. All material to be incorporated in the work shall also be as per specialized firm and as approved by the GE.

S&F in repair plastic seat cover black / white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F in repair vitreous China wash hand basin, white, flat back, size 580x450mm, including waste pipe, chromium plated brass waste coupling 32mm dia, CI bracket etc complete all as specified and as directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Syphonic action type, low level flushing cistern of capacity 10 liters, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and as directed.

S&F in repair 20 mm gun-metal globe or gate valves, with iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe complete all as specified and as directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 including necessary Plain CPVC SDR 11 fittings, laid in trenches and wall including taking up or down old unserviceable water tubing and connection complete all as specified and as directed.

S&F in repair 15mm, cast copper alloy, chromium plated, bib cock, fancy type, with wall flange, with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe complete all as specified and as directed.

S&F in repair 15mm, cast copper alloy, chromium plated, Angular stop cock, with wall flange, with crutch or butterfly handle, screwed down, screwed both ends for 15mm bore iron pipe complete all as specified and as directed.

S&F in repair 15mm, cast copper alloy, chromium plated, stop cock, fancy type, with long shank and cup (Concealed type), with wall flange, with crutch or butterfly handle, screwed down, screwed both ends for 15mm bore iron pipe complete all as specified and as directed.

S&F 15mm dia brass chromium plated central hole wash basin mixer for mixing Hot & Cold water, with or without lettered 'HOT' or 'Cold' screwed down, screwed for 15mm bore iron pipe complete all as specified and as directed.

S&F 15mm dia brass, chromium plated, fancy type, wall mixer with over head shower for mixing hot and cold water, screwed down, fixing and connection to pipes complete all as specified and as directed. Make Cera Cat Part No F-1017401, Hindware Cat Part No. F740022 or equivalent model of Make mentioned in PS.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair vitreous China ware EWC combined pattern complete with internal fittings complete all as specified and as directed. Make : Cera Cat Part No S101314L or equivalent Model of Parryware / Hindware or equivalent model of Make mentioned in PS.

S&F in repair CP Health Faucet, brass body, with wall hook and one meter stainless steel braided rubber hose pipe complete all as specified and as directed.

S&F in repair super special colors vitreous China wash hand basin, flat back, size 580x430mm including waster pipe, chromium plated waste coupling 32mm dia , with pedestal / bracket etc complete all as specified and as directed. Make: CERA Cat Part No: S2040113 Wash basin S2090106 Pedestal or equivalent model of Make mentioned in PS.

S&F in repair 20 mm dia, stainless steel, fancy type curtain rod, fixed with bracket including S&F SS Bracket & end cap complete all as specified and as directed.

Dismantling of wall or ceiling board (fiber, pulp, insulation etc) any thickness including cover fillets and removal from the site complete all as specified and as directed.

S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed.

S&F 4mm thick asbestos cement texture building boards, fixed to timber framework or steel frame work with screw or J hooks complete all as specified and as directed.

M&L For Providing and fixing 10mm thick plaster of Paris sunk or raised molding ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately complete all as specified and as directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

Taking down aluminium windows (with frame & shutters) for servicing by tightening loose fittings & aluminium sections by tightening existing screws or providing new screws/aluminium cleats of appropriate size, cleaning, greasing/oiling (where required), easing & making functional and refixing in same opening complete all as specified and as directed.

M&L for 18 mm thick GREEN/BLACK/RED(LAKHA) granite stone, factory made bull nosed, polished (table rubbed and polished) as in jambs, wall, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe etc including demolition of old sotne slab complete all as specified and as directed.

M&L for stainless steel silver and black name plate, for office wall mounted (size 300mmx200m) complete all as specified and as directed.

Manglam Engineers and Construction Co

AEGIS INTERNATIONAL

MOHAN LAL GUPTA

High Tech Metal India

SA construction co.

Shri Kanchan Engineers