REPAIR, REPLACEMENT AND MAINTENANCE OF INTERNAL ELECTRICAL WIRING ALONG WITH FITTINGS, FIXTURES, AT OTM ACCN AND LOW TENSION SWITCH GEARS ,UG CABLES, TERMINATION BOX AND OTHER CONNECTED FITTINGS FIXTURES ETC AT MD ACCN MINNIE BAY UNDER AGE E/M NO-I A

Amount

Taking down carefully aluminum/copper point wiring complete including all connected fittings & fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors etc complete all as required complete all as specified and as directed by Engineer-in -charge.

M&L Point wiring with 2 runs of 1.5 Sqmm (nominal area) PVC FRLSH insulated 1100 volts grade, multi stranded, copper conductor, single core cables unsheathed cable drawn through and including PVC casing capping of size not less than 20mm in width, 1.2mm thick with all fittings and accessories including mild steel sunken terminal boxes or PVC termination board/boxes with 3mm thick plastic laminated sheet top cover for mounting switches, sockets, regulators etc. including PVC FRLSH insulated and unsheathed, multi-stranded single core copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light/fan point controlled by one 5 Amps one way switch complete all as specified and as directed by Engineer-in -charge.

All as per item No 2 above but one fan point controlled by one 5 Amps one way switch complete all as specified and as directed by Engineer-in -charge.

All as per item No 2 above but one 3 pin socket outlet 5 Amps, on independent boardcomplete all as specified and as directed by Engineer-in -charge.

All as per item No 2 above for call bell point controlled by push bottomcomplete all as specified and as directed by Engineer-in -charge.

All as per item No 2 above but one 3 pin socket outlet 5 Amps, on the same board with other switches complete all as specified and as directed by Engineer-in -charge.

All as per item no 02 above but one light point controlled by two way switch complete all as specified and as directed by Engineer-in -charge.

All as per item No 2 here-in-before but point wiring for one 3 pin 15 Amps socket point on independent board with 2.5 Sqmm size PVC FRLSH insulated, unsheathed, multi stranded, copper conductor cables and with 2.5 Sqmm PVC FRLSH insulated unsheathed, single core, multistranded copper conductor cable as earth wire complete all as specified and as directed by Engineer-in -charge.

M&L Point wiring with 2 runs of 1.5 Sqmm (nominal area) PVC FRLSH insulated 1100 volts grade, multi stranded, copper conductor, single core cables unsheathed cable drawn through and including PVC casing capping of size but not less than 20mm in width, factory made PVC sheet terminal box modular flush type, for mounting fittings such as modular switches, sockets, fan regulators, bell push etc and including all other fixing accessiories for one light point/fan point controlled by one way modular switch complete all as specified and as directed by Engineer-in -charge. Note:- Cost of PVC/ Metal Modular flush Box and necessary cover plates with frame included in this item and contractor shall deemed to be included in this quoted rate.

All as per item No 9 above but one fan point controlled by one 5 Amps one way modular switch complete all as specified and as directed by Engineer-in -charge.

All as per item No 9 above but one call bell point controlled by push button complete all as specified and as directed by Engineer-in -charge.

All as per item No 9 above but one 5 /6 amps socket controlled by one way switch on Independent board complete all as specified and as directed by Engineer-in -charge.

All as per item No 9 above but one 5/6 amp socket controlled by one way switch on same board complete all as specified and as directed by Engineer-in -charge.

All as per item no 9 above but one light point controlled by two-way switches, with cables 1.5 sqmm size complete all as specified and as directed by Engineer-in -charge.

All as per item No 9 above but one 3 pin 15/16 amps switch socket out let on independent board but using PVC FRLSH insulated, unsheathed multi stranded copper conductor cable of size 4 Sqmm and 4.0sqmm for earth continuity conductor (Power circuit to be taken from MCB DB)complete all as specified and as directed by Engineer-in -charge.

Taking down old unserviceable aluminium sub main wiring any size complete with PVC conduit/ casing capping and removing materials from site and making the disturbed surfaces of walls good matching the existing finish, etc complete all as specified and as directed by Engineer-in -charge.

M&L Sub main wiring with 4 runs of 6 Sqmm single core, PVC FRLSH insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables drawn through PVC casing caping/Conduit with fitting/accessories, fixed on, walls, ceiling etc. as required including one run of 6 Sqmm PVC FRLSH insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete as specified and directed. Note : Four runs of cables, one run of earth wire and one run of PVC casing & capping shall be measured as one run length.

M&L Sub main wiring with 4 runs of 10 Sqmm single core, PVC FRLSH insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables drawn through PVC casing caping/Conduit with fitting/accessories, fixed on, walls, ceiling etc. as required including one run of 10 Sqmm PVC FRLSH insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete as specified and directed. Note : Four runs of cables, one run of earth wire and one run of PVC casing & capping shall be measured as one run length.

M&L Sub main wiring with 2 runs of 6 Sqmm single core, PVC FRLSH insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables drawn through PVC casing caping/Conduit with fitting/accessories, fixed on, walls, ceiling etc. as required including one run of 6 Sqmm PVC FRLSH insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete as specified and directed. Note : Four runs of cables, one run of earth wire and one run of PVC casing & capping shall be measured as one run length.

M&L Sub main wiring with 2 runs of 4Sqmm single core, PVC FRLSH insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables drawn through PVC casing caping/Conduit with fitting/accessories, fixed on, walls, ceiling etc. as required including one run of 4 Sqmm PVC FRLSH insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete as specified and directed. Note :Four runs of cables, one run of earth wire and one run of PVC casing & capping shall be measured as one run length.

M&L cutting of groove channel on wall for sub main/ point wiring and preparing surface to make good complete all as specified and directed.

Supply and fixing as in repair of PVC insulated FRLSH multistranded copper conductor of size 1.5 Sqmm of any colour complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC insulated FRLSH multistranded copper conductor of size 2.5 Sqmm of any colour complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC insulated FRLSH multistranded copper conductor of size 4.0 Sqmm of any colour complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC insulated FRLSH multistranded copper conductor of size 6.0 Sqmm of any colour complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC insulated FRLSH multistranded copper conductor of size 10.0 Sqmm of any colour complete all as specified and as directed by Engineer-in -charge.

Material and labour as in repair for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 mm x 3 mm by means of GI welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with steel round bar 8 mm RCC 1:1.5:3 cover slab of size 450x 450 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or salt of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed by Engineer-in -charge.

S&F switch piano, flush type , single pole , one way 5 Amp, 230 Volts complete all as specified and as directed by Engineer-in -charge.

S&F switch piano, flush type , single pole, two way 5 Amp, 230 Volts complete all as specified and as directed by Engineer-in -charge.

S&F socket outlet, 5 Amps, 5 pin, flush type, 230 volts complete all as specified and as directed by Engineer-in -charge.

S&F switch socket combination 5/6amps 5in 1 flush type complete all as specified and as directed by Engineer-in -charge.

Supply and fixing bell push switch flush type single pole one way 5/6 amps complete all as specified and as directed by Engineer-in -charge.

S&F electronic type fan regulator step type, complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of switch piano type flush, single pole, one way 5 A 230 volts complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of socket outlet, 5 pin, 5/6 Amp, flush type, 230 V complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of socket outlet 2 in 1,6 pin, 15/16 A, flush type 240 V complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of ceiling rose, surface backlite,three terminal complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of bell ding dong 230 V, single phase complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of switch piano flush type single pole two way 5/6 amps complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of bell push flush type one way 5Amp 240 Volt complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of electronic double space rotary 5 speed type regulator 120 watt complete all as specified and as directed by Engineer-in -charge.

S&F as in repair switch socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination complete.

Supply and fixing as in repair of switch socket outlet multi purpose, 3 pin, 15/16 Amp & 3 pin 5 amp, combination box typecomplete all as specified and as directed by Engineer-in -charge.

S&F as in repair switch socket combination 3 pin 5 amp, complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of socket outlet 3 pin 5 amp, switch socket combination box type complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair multi music call bell at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of including connection of ding dong call bell at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of new Lamp holder, PVC/ Polycarbonate type with back plate for batten fittings of 230 Volts at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fix of modular switch piano flush type single pole one way 5/6 amps complete all as specified and as directed by Engineer-in -charge.

Supply and fix of modular switch piano flush type single pole two way 5/6 amps complete all as specified and as directed by Engineer-in -charge.

Supply and fix including connection of 5/6 Amps 5pin modular socket outlet flush type complete all as specified and as directed by Engineer-in -charge.

Supply and fixing including connection of modular bell push switch flush type single pole one way 5/6 amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing including connection of modular switch piano flush type single pole one way 15/16 amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing including connection of Modular socket 2 in 1, 5 pin 15/16 Amps flush type complete all as specified and as directed by Engineer-in -charge.

Supply and fixing modular rotating step type electronic mini fan regulator, 120/280 volts complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of Modular switch, one way,5/6 Amp 230, 1 module complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of modular socket 5/6 Amp-5 pin 2 module complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of Modular switch, one way,15/16amp 230, 1 module complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of Modular socket 15/16 amps,2/3 pin combined 2 module complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of Modular fan step regulator 120 Watt -2 module complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of modular switch piano flush type single pole two way 5/6 amps complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of Modular bell push 6A one module complete all as specified and as directed by Engineer-in -charge.

Supply and fixing including connection of call bell ding dong complete all as specified and as directed by Engineer-in -charge.

S&F ceiling rose, surface, Bakelite, 65x50 mm two to three terminals complete all as specified and as directed by Engineer-in -charge.

M&L Lamp holder, PVC/ Polycarbonate type with back plate for batten fittingscomplete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair of 3mm thick laminated super hylem sheet white colour of size 5" x 5" inch and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 3mm thick laminated super hylem sheet white colour of size 7" x 5" inch and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 3mm thick laminated super hylem sheet white colour of size 7" x 9" inch and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 3mm thick laminated super hylem sheet white colour of size 9" x 11" inch and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 3mm thick laminated super hylem sheet white colour of size 11" x 13" inch and refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular PVC flush box 1/2 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular PVC flush box 3 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular PVC flush box 4 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engineer-in -charge.

S&F as in repair modular PVC flush box 6 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular PVC flush box 8 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular PVC flush box 12 module and refitting of existing fitting and fixtures etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular White cover plate with frame 1 module refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular White cover plate with frame 2 module refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular White cover plate with frame 3 module refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular White cover plate with frame 4 module refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular White cover plate with frame 6 module refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular White cover plate with frame 8 module refitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of modular White cover plate with frame 12 module refitting of existing serviceable switch, socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC box of size 4X4 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC box of size 4X6 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed.

Supply and fixing as in repair of PVC box of size 8X6 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC box of size 8X10inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC box of size 10X12 inch and fitting of existing serviceable switch ,socket, regulator etc at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of new PVC casing capping medium grade of size 25 mm on wall /roof with help of screw including fixing of existing serviceable copper /aluminium conductor and all fitting fixture such as Tee, Elbow and lapping complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of new PVC casing capping medium grade of size 32 mm on wall /roof with help of screw including fixing of existing serviceable copper /alluminium conductor and all fitting fixture such as Tee, Elbow and lapping complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of new PVC conduit medium grade of size 20 mm on wall /roof with help of screw and GI saddle including fixing of existing serviceable copper /alluminium conductor and all fitting fixture such as Tee, Elbow and lapping complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC conduit medium grade of size 25 mm on wall /roof with help of screw and GI saddle including fixing of existing serviceable copper /alluminium conductor and all fitting fixture such as Tee, Elbow and lapping complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC Flexible conduit and supply and fixing of new PVC Flexible conduit of size 25 mm complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of PVC Flexible conduit and supply and fixing of new PVC Flexible conduit of size 20 mm complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of single pole and neutral enclosure with a two pin and earth plug and socket complete with single pole MCB 25 Amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of vertical type MCCB DB TPN 4 way IP-43 made of sheet steel sophisticated, powder painted with bus bar, neutral link, earth bar and Din rail ,415 Volts with double door complete all as specified and as directed by Engineer-in -charge. Note : Concealed the DBs on wall if required all including make in good and matching with existing surface.

Supply and fixing thermal type of MCCB TP 16 KA 100 Amps adjustable thermal and magnetic setting complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB SPN DB 12 way IP-43 made of sheet steel sophisticated, powder painted with bus bar, neutral link, earth bar and din rail ,230 Volts with double door complete all as specified and as directed by Engineer-in -charge. Note : Concealed the DBs on wall all including make in good and matching with existing surface.

Supply and fixing as in repair of MCB SPN DB 8 way IP-43 made of sheet steel sophisticated, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double doorcomplete all as specified and as directed by Engineer-in -charge. Note : Concealed the DBs on wall all including make in good and matching with existing surface.

Supply and fixing as in repair of MCB SPN DB 4 way IP-43 made of sheet steel sophisticated, powder painted with bus bar, neutral link, earth bar and Din rail ,230 Volts with double door complete all as specified and as directed by Engineer-in -charge. Note : Concealed the DBs on wall all including make in good and matching with existing surface.

Supply and fixing as in repair of MCB TPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB TPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB TP 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Ampscomplete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB TP 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB SP 6-32 Ampscomplete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB SP 40 Amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB SP 63 Amps complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB blank plate from MCB DBs complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of three phase KWH meter 4 wire with LED Display, LED meter 10-60 Amp with Box complete all as specified and as directed by Engineer-in -charge. Note : Old unserviceable KWH meter shall be deposited at AGE E/ M I Store yard.

Supply and fixing as in repair of single phase KWH meter 2 wire with LED Display, LED meter 10-60 Amp with cristal Box complete all as specified and as directed by Engineer-in -charge. Note : Old unserviceable KWH meter shall be deposited at AGE E/ M I Store yard.

Supply and fixing as in repair of PVC energy meter seal with complete all as specified and as directed by Engineer-in -charge.

M& L for preparation to internal and external old steel surface of LT Feeder Pillar Box/ Panel Boards of various size and completely removal of existing treatment by scraping or chemical and surface painted with DUCO paint with help of spray gun over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

M& L for repair of fabrication for LT Feeder Pillar Box/ Panel Boards made out of 2.00 mm thick mild steel sheet fixed to existing frame and painted with DUCO paint with help of spray gun over a coat of red oxide primer including taking out to existing warn out shutter frame and fixed with minimum two hinges to existing frame complete all as specified and as directed by Engineer-in -charge.

M& L for repair of fabrication for LT Feeder Piller Box/ Panel Boards made out of 3.00 mm thick mild steel sheet fixed to existing frame and painted with DUCO paint with help of spray gun over a coat of red oxide primer including taking out to existing warn out shutter frame and fixed with minimum two hinghes to existing frame complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of aluminium tower bolts, 300mm long bright bolt including connected accessories fixed on front and rear side of the doors for locking LT FP Boxes complete all as specified and as directed by Engineer-in-Charge.

Material and labour as repairs of doors hinges of LT feeder pillar/Panel box complete with welding complete all as specified and as directed by Engineer-in-Charge.

Taking down of PCC any grade complete all as specified and as directed by Engineer-in-Charge.

M&L Plain cement concrete (1:2:4) Nominal mix of B1 grade with using 20mm aggregate in foundations filling and mass concrete including necessary form work complete all as directed.

Material and labour PCC (1:3:6) type C-2 Nominal mix (using 40 mm graded broken stone aggregate) as in coping/collar of poles including necessary form work complete all as specified

Taking down of MCCB of any size complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCCB 630 Amps,TPN/ 4 pole, 415 volt, breaking capacity 36 KA conforming to IS 13647-II: complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCCB 400 Amps,TPN/ 4 pole, 415 volt, breaking capacity 36 KA conforming to IS 13647-II: complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCCB 250Amps,TPN/ 4 pole, 415 volt, breaking capacity 25 KA conforming to IS 13647-II: complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCCB 200Amps,TPN/ 4 pole, 415 volt, breaking capacity 25 KA conforming to IS 13647-II: all as specified.

Supply and fix MCCB 160 Amps, TPN/4 pole, 415 volt, breaking capacity 16 KA conforming to IS 13647-II: complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCCB 63 Amps, TPN/4 pole, 415 volt, breaking capacity 16 KA conforming to IS 13647-II: complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing as in repair of on load change over switch 4 pole 400 Amps in sheet metal enclosure complete all as specified and as directed by Engineer-in-Charge.

Taking Down of Old aluminium Cable Lugs complete all as specified and as directed by Engineer-in-Charge.

Supply and fix aluminium cable lugs for fixing of armoured cables in panels complete all as specified and as directed by Engineer-in-Charge for the following sizes of cables complete all as specified and directed :-

Taking Down of Old Copper Cable Lugs complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair for Copper cable lugs for fixing of armoured cables in panels complete all as specified and as directed by Engineer-in-Charge and for the following sizes of cables :-

Taking Down of Old U/S cable gland complete all as specified and as directed by Engineer-in-Charge.

Supply and fix of Cable gland of LT UG cables in panels for complete all as specified and as directed by Engineer-in-Charge and the following sizes of LT UG cables :-

Taking down of U/S Multi Function Meter and Supply and fixing MFM meter (V,A,PF, W) with CTs including necessary fabrication requaired and painting the effected area with existing paint complete all as specified and as directed by Engineer-in-Charge.

Taking down of unserviciable old UG Cable of any size and any type complete all as specified and as directed by Engineer-in -charge.

Suppy and laying in trenches, fixed on walls, passing through pipes, jointing and testing of electric LT XLPE cables, PVC insulated, PVC sheathed, galvanised steel strip or wire armoured electric power cables with stranded aluminium conductors 1100 Volts grade complete all as specified and as directed by Engineer-in-Charge for the following size :- Note: The rates shall include Cable lugs, Cable Gland and joint kit (if required).Earthwork shall be measured and paid separately

3.5 Core 25 Sqmm

3.5 Core 50 Sqmm

M&L for relaying of serviciable cable of XLPE insulated, PVC bedded, Galvanized steel strip or wire armoured underground heavy duty electric power cable with stranded aluminum conductor 1100 volts grade, laid in trenches / duct with shaddling / on pole including all necessary fixing arrangement such as lugs, glands end termination etc of size 10 Sqmm to 35 Sq mm 3.5 core including earthwork complete all as specified and as directed by Engineer-in-Charge

M&L for relaying of serviciable cable of XLPE insulated, PVC bedded, Galvanized steel strip or wire armoured underground heavy duty electric power cable with stranded aluminum conductor 1100 volts grade, laid in trenches / duct with shaddling / on pole including all necessary fixing arrangement such as lugs, glands end termination etc of size 50 Sqmm 3.5 to 95 Sq mm 3.5 Core core including earthwork complete all as specified and as directed by Engineer-in-Charge

Supply and laying as in repair of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 63 mm and inner dia 50 mm polythylene including coupler & Bend with smoooth inernal and profiled external surface for non pressue under ground cable complete all as specified and as directed by Engineer-in-Charge

Taking down of old GI /PVC Pipe complete all as specified and as directed by Engineer-in -charge.

S&F in repair GI pipe of medium grade 40 mm dia all fitting fixture for fixing with wall and road crossing etc including necessary earthwork complete all as specified and as directed by Engineer-in-Charge

Excavation in trenches any type of soil (soft/loose/hard/dense) not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, pipe, laying of cable etc not exc 10 Sqmtr on plan and not exc 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-Charge

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil all as specified and as directed by Engineer-in -charge.

Removing excavated materials (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point all as specified and as directed by Engineer-in -charge.

M&L for road cutting, removing of material , returning filling and PCC 1:2:4 for laying of LT UG cable /Galvanised Iron Pipe/Rex Pipe all as specified and as directed by Engineer-in -charge.

M&L for Fault finding of LT UG Cable including excavation , returning refilling after rectification of fault with fixing of Straight through joint kit, extra UG Cable and DWC (Double Wall corrugated) HDPE pipe complete all as specified and as directed by Engineer-in -charge. Note:- LT UG Cable, Straight through joint kit and DWC (Double Wall corrugated) HDPE pipe measured and paid separately under relevant items.

Supply and fixing as in repair of cable jointing kit for 1100Volt grade cable for Straight through, heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 10 to 16 Sqmm 3.5 core including earthwork complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of cable jointing kit for 1100Volt grade cable for heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm 3.5 core including earthwork complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of cable jointing kit for 1100Volt grade cable for Straight through, heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 70 to 150 Sqmm 3.5 core as in repairs complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of cable jointing kit for 1100Volt grade cable for Straight through, heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 185 to 240 Sqmm 3.5 Core including earthwork complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of cable jointing kit for 1100Volt grade cable for Straight through, heat shrinkable type joint complete with jointing materials and accessories suitable for LT, XLPE armoured aluminium conductor cable of size 300 to 400 Sqmm 3.5 Core including earthwork complete all as specified and as directed by Engineer-in -charge.

Rerouting the serviciable Power Cable on wall /cable duct of size 16 to 50 Sqmm with saddling with aluminium pati in required size with screw inside cable duct complete all as specified and as directed by Engineer-in -charge.

Rerouting the serviciable Power Cable on wall /cable duct of size 70 to 185 Sqmm with saddling with aluminium pati with requard size of screw inside cable duct complete all as specified and as directed by Engineer-in -charge.

Supply & fixing IP 66 thermoplastic-polycarbonate cable junction box of size 205X255X112mm with terminal which is totally shock proof, water proof, halogen free, silica and having internally embedded gasket technology fixing on pole / surface / frame with the help of GI calmp of required size / self drill screw ,one no of MCB SP 6 Amp and four way Connector complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of IP 66 thermoplastic-polycarbonate cable junction box of size 155X210X92 mm with terminal suitable for 10 to 16 Sqmm ,which is totally shock proof, water proof, halogen free, silica and having internally embedded gasket technology fixing on pole / surface / frame with the help of required size / self drill screw and four way 32 Amp Connector complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of IP 66/ 67 thermoplastic-polycarbonate cable junction box of size 130X180X77 mm with terminal suitable for 4 to 10 Sqmm which is totally shock proof, water proof, halogen free, silica and having internally embedded gasket technology fixing on pole / surface / frame with the help of required size / self drill screw with four wa Connector complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of Earthing complete with copper earth plate electrode 60 cm x 60 cm x 3 mm thick, buried directly in ground earth pit not less than 2.25 metre below normal groud level with top edge of the plate not less than 1.5 mtr below ground level, connected to and including copper earth strip 25 x 3.00 mm by means of copper brazing and steel bolts, nuts, check nuts and washers protected with 40mm bore GI pipe light grade and 15 mm dia GI pipe for watering and earth pit surrounded by picked layer of coal and common salt, 15cm thick all around bottom and top, watering pipe of 20 mm bore of light grade with funnel all as shown in electrical plate No 3 of SSR Part-I (2009) and connecting to earthing test point, main switch board and testing on completion including PCC (1:3:6) type C-2, using 20mm graded stone aggregate as in earthing pit with RCC cover and framing including necessary earth work etc, complete all as specified and as directed by Engineer-in -charge. Note: (i) Cost of Copper earth Strip and GI protection pipe upto 7.5m length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation.returninng & filling. PCC chamber pit,RCC cover & test point (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit. (iv) All accessories required for copper steel plate electrode required , as specified and as directed by Engineer in charge as per (v) Copper Material should be molecularly 99.99%

Supply and fixing as in repair of Earth pit indicator for existing earthing pit made out of 16 mm dia and 60 cm long MS Square Bar embeded in PCC (1:3:6) type C-1 using 20 mm graded stone agreegate in PCC block of size 30 X30 X30 cm including CI/MS plate of size 25X30X 3 mm thick fixed on side of earth pit cover complete painting and writing over the plate (i.e). Type , Result, Date of measurement and pit number with Black beground with white and complete all as specified and as directed by Engineer-in -charge.

Material and labour in repair PCC earthing pit of outer size 450X450 X300 MM and inner Size 350X350X 300 RCC pit cover of required size with handle arrangement including necessary earth work complete all as specified and as directed by Engineer-in -charge.

Material and labour Painting to Steel tublar / RCC poles 9 m long with one coat of Synthetic enamel paint black/yellow combination Zebra marking up to 1 m from ground level / coping,then remaining portion shall be painted with one coat of aluminium paint including preparation of old painted surfaces and painting the pole terminal etc.complete all as specified and as directed by Engineer-in -charge.

S&F in replacement of GI tubular swaged poles complete with GI base plate finial taper plug, bolts, nuts and screws, with two holes for drawing conductor between pole box to street light fitting all as specified type 410 SP-31 of height 9metre including necessary Earth work,PCC foundation copping etc and refixing of all existing fitting fixture exist in old electric pole complete all as specified and as directed by Engineer-in -charge.

Supply and fixing in repair of 2.5 Sq.mm (nominal area) PVC unsheathed multi strandard copper conductor PVC insulated 1100 volt FRLSH grade twin core cable drawn through CPVC Pipe not less than 20 mm dia for connecting the street light fittings including alluminium clamp complete all as specified and as directed by Engineer-in -charge.

M&L for Servicing of air circuit breaker rating 1250-1600 Amps ,dismantling from the panel by taking out the defective moving contact unit with fingers and its connected accessories , dismantling and servicing the defective moving contact with fingers ( 3nos ), under voltage trip ( 1 no ) , shunt release trip ( 1 no ), assembling and fixing back in to the panel and locking properly and testing on load all as specified by Engineei-in-charge

Supply and fixing as in repair of energy efficient solar street light all in one with lithium battery LED type of 30 watts,IP65 in built motion sensor colour temp 6500 complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of under voltage relay 415 V AC suitable for LT ACB breaker 1250 Amps conecting and testing all as specified and directed by Engineer-in-charge

Taking out old unserviceable Service wire and supply and fixing submersable wire copper Conductor Weather Proof 6 Sqmm three core complete all as specified and as directed by Engineer-in -charge.

Taking out old unserviceable Service wire and supply and fixing submersable wire copper Conductor Weather Proof 10 Sqmm three core complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of rubber insulation tape 25 Cm width 2.5 Mtr long fixing of connection make water proof outside the Electrical equipments and also fixing the underground cable where crack arises outside complete all as specified and as directed by Engineer-in -charge.

Supply and laying broken stone or Boulders filling of Gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 150mm thick, watered and rammed to a True Surface, complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of cross arms, bracing, supports, clamps and back plate fabricated from structural mild steel section for gate including nuts, bolts, washers, welding, bending, cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of danger notice plate of PVC sheet, vitreous enamelled white, with letters, figures ( English, Hindi,Tamil) and conventional skull and bones in signal red colour of approved size, for HT of voltage 11000 Volts, size all as directed.

Supply and fixing as in repair of danger notice plate of PVC sheet, vitreous enamelled white, with letters, figures ( English, Hindhi,Tamil) and conventional skull and bones in signal red colour and fixed with Alluminium clamps, bolts and nuts of approved size, for LT of voltage 440 Volts, 25x20cm size all as directed.

Supply and fixing as in repair of earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 32 mm x 6 mm by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit in PCC (1:3:6) type C-1, pre-cast reinforced cover with MS XPM Jalli, RCC 1:1.5:3 cover slab of size 300 x 300 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and testing complete all as specified and as directed by Engineer-in -charge. NOTE : (i) The earthing pit should be provided with proper earth pit and pit cover. Pit cover should be painted with synthetic enamel paint of approved colour and pit number to be marked on a GI plate above 45 cm from GL (ii) If the desired earth resistance is not achieved during testing as per IS provision then new earthing shall be carried out by the contractor at his own cost and no extra claim shall be admissible.

Supply and fixing as in repair of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required for 25 mm x 3 mm thick, copper strip using porcelain clit/post insulators, complete all as specified and as directed by Engineer-in -charge.

Taking down of unserviceable GI /Aluminium earthing strip any size complete all as specified and as directed by Engineer-in -charge.

Supply and fixing GI earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required for 32 mm x 6mm thick, Galvanised using porcelain clit/post insulators, complete all as specified and as directed by Engineer-in -charge.

Supply and fixingAluminium earth continuity conductor or main earthing lead fixed to wall or recess or any other indicated situation for loop earthing etc. as required for 25 mm x 3mm thick, alluminium using porcelain clit/post insulators, complete all as specified and as directed by Engineer-in -charge. Note:-Necessary scaffolding and safety precaution shall be deployed and ensured by the contractor during execution of work and cost of this effect included in this quoted rate.

M&L of welding of two MS/GI Sheet / Pipes on site including grinding the welded portion and made smooth surface complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of MCB 100 Amps, TPN/4 pole, 415 volt, breaking capacity 16 KA complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing as in repair of Aluminium Bus Bar of existing Size in the existing panel board on site on required shape post insulators, complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of LED Indicating lamp (R-Y-B) complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of LED 7 W Bulb type complete all as specified and as directed by Engineer-in -charge.

S&F Decorative Ultra Slim linear LED tube light fitting fixture with extruded Polycarbonate environmentel friendly energy effcient of capacity 20W 6000K etc, complete with all accessories internally pre-wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size of complete all as specified and as directed by Engineer-in -charge.

S&F Decorative Ultra Slim linear LED tube light fitting fixture with extruded Polycarbonate environmentel friendly energy effcient of capacity 10 W 6000K etc, complete with all accessories internally pre-wired and including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size of complete all as specified and as directed by Engineer-in -charge.

S&F energy efficient recess / Ceiling mounted LED luminaire suitable for 2'x2' grid with profiled diffuser including lamp,electronic control driver 40 watts, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as specified and as directed by Engineer-in -charge.

S&F energy efficient wall mounted LED luminaire 12 watts, AC 230 Volts 50 Hz supply single phase including connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting and fixing to ceiling complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of rechargeable 12 W LED light with frosted PC cover and pull chord rechargeable Li-ion battery of 3.7 volts, 2000 mAh capacity environmental friendly energy efficient complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair LED mirror light fittings10 watt with integral polycarbonate LED channel with white acrylic cover complete all as specified and as directed by Engineer-in -charge.

Supply and fix LED street light fittings 36 Watt pressure dia cast housing with epoxy power coated dark graphite grey colour finish, polycarbonate cover with individual LED lenses with IP 65 protection complete all as specified and as directed by Engineer-in -charge.

Supply and Fixing in replacement of GI bracket made up of steel tube of 25mm dia and 60cm long including two numbers of GI clamp fixed on wall with GI flash nut of suitable size complete all as specified and as directed by Engineer-in -charge.

S&F in repair LED tube light fitting,20 watts, 230v, surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver, flicker free, high efficiency and connected batten option & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed by Engineer-in-Charge.

S&F in repair LED tube light fitting,10 watt, 230v, surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver, flicker free, high efficiency and connected batten option & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed by Engineer-in-Charge.

S&F in repair LED tube light fitting,5watt, 230v, surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver, flicker free, high efficiency and connected batten option & connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed by Engineer-in-Charge.

Supply and fixing as in repair of LED 9 W Bulb type complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 12 W LED surface type decorative ultra slim round lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient and making connections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 12 W LED recess type decorative ultra slim round lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient and making connections with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of LED Strip light 22 Lumen LED 220 Volt RGB (WW,WH) Pink coloured complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of neon LED Strip light 400 Lumen / mtr 220 Volt RGB coloured complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of neon LED Strip connector 220 Volt complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of LED Strip connector 220 Volt for RGB coloured complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of E Board 2feet X2 feet complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 36 watt LED driver in replacement of 2 X 2 ultra slip recess mounted luminaire with high brightness complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of LED 10 watt Bollard light low made in cast aluminium spigot housing withdecorativecleare opal arcylicdiffuser and IP 65 protection complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of GI bracket for street lights made out of medium grade GI pipe 40mm dia, 1.2 mtr long bend to shape as directed, fixed on poles with two Nos GI clamp of size 40 x 6mm flat iron suitable for steel tubular pole including suitable GI nuts and bolts washers complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of energy efficient street light luminaire LED type 70 watts,IP66 ,230volts, 50 Hz , in Deepdrawn aluminium housing and cast aluminium pipe mounting attachment including suitable heavy duty electronic driver also driver should withstand 265 volts,and complete accessories, pre-wired and connection complete with suitable size of stranded copper flexible conductorcomplete all as specified and as directed by Engineer-in -charge.

Taking down of existing Ceilling fan / Wall mounted fan/ Exhaust fan of any size and sweep and keeping in safe custody and refixing the same in serviceable condition in specified location complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of Energy efficient BLDC ceiling fan 1200 mm sweep single phase 230 / 240 volts AC with external distance speed control with necessary fitting and connecting with cable from ceiling rose or connector to fan complete all as specified and as directed by Engineer-in -charge. Note : Old unserviceable ceiling fan shall be deposited to AGE E/ M I Store yard.

Supply and fixing as in repair of new capacitor 2.5mfd of celling/ wall mounted fan of 230 Volts at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of new capacitor 3.15mfd of celling/ wall mounted fan of 230 Volts at the same place complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of wall mounted fan 600 mm sweep completed fixed to wall with nut bolts etc 3 core cable from connected to ceiling rose complete all as specified and as directed by Engineer-in -charge. Note : Old unserviceable wall mounted fan shall be deposited to AGE E/ M I Store yard.

Supply and fixing as in repair of exhaust fan continuous duty with louvers, double ball bearing. silent operation, rust proof body and blades with fixing arrangements of size 300mm sweep, 1400 rpm, 240V, complete all as specified and as directed by Engineer-in -charge. Note : Old unserviceable exhaust fan shall be deposited to AGE E/ M I Store yard.

Supply and fixing as in repair of exhaust fan continuous duty with louvers, double ball bearing. silent operation, PVC body and blades with fixing arrangements of size 250 mm sweep, 1400 rpm, 240Vcomplete all as specified and as directed by Engineer-in -charge. Note : Old unserviceable exhaust fan shall be deposited to AGE E/ M I Store yard.

Supply and fixing as in repair of wall mounted fan 400 mm sweep completed fixed to wall with nut bolts etc 3 core cable from connected to celing rose including complete all as specified and as directed by Engineer-in -charge. ote : Old unserviceable wall mounted fan shall be deposited to AGE E/ M I Store yard.

Supply and fix as in repair of Fan hook suitable for hanging of ceiling fan, made out of MS flat 40x5 mm clamp or 12 mm dia Squre bar long max 30 CM , duly welded/drilled, including nuts, bolts and washers complete as required at site complete all as specified and as directed by Engineer-in -charge.

Taking down ceiling fan of any type, any make and any sweep for repairing,opening the body including blade, checking for replacement of unserviceable spares,cleaning, oiling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position testing and hanging up the same testing and rectification if any complete all as specified and as directed by Engineer-in -charge. Note: New spare parts required for replacement shall be measured and paid separately as 'Supply only'. Necessary gate pass shall be submitted along with RAR/FB for payment.

Supply only MS split pin size 2 " x 1/8 " complete all as specified and as directed by Engineer-in -charge.

Supply only Hanging bolt with nut of size 3/8" x 3 1/2 " complete all as specified and as directed by Engineer-in -charge.

Supply only Rubber bush of size 1 1/2 " dia x 1" thick complete all as specified and as directed by Engineer-in -charge.

Supply only Blade of size - 1200 mm sweep complete all as specified and as directed by Engineer-in -charge.

Supply only Ball bearing of existing size complete all as specified and as directed by Engineer-in -charge.

Supply only Blade of size - 1400 mm sweep complete all as specified and as directed by Engineer-in -charge.

Supply only Metal bush bearing complete all as specified and as directed by Engineer-in -charge.

Supply only Shaft (good quality of mild steel) for 1200 / 1400 mm sweep ceiling fan complete all as specified and as directed by Engineer-in -charge.

Taking down exhaust fan of any type, any make and any sweep for repairing, opening the body including blade, checking for replacement of unserviceable spares,cleaning, oiling, greasing, replacement of unserviceable spare by new one, ,re-assembling of all components in original position testing and hanging up the same complete all as specified and as directed by Engineer-in -charge. Note: New spare parts required for replacement shall be measured and paid separately as 'Supply only'.

Supply only Blade for 450 mm sweep exhaust fan complete all as specified and as directed by Engineer-in -charge.

Supply only Ball bearing of existing size complete all as specified and as directed by Engineer-in -charge.

Supply only Blade for 300/250 mm sweep exhaust fan complete all as specified and as directed by Engineer-in -charge.

Supply only Metal bush bearing complete all as specified and as directed by Engineer-in -charge.

Supply only Blade for 450 mm sweep exhaust fan complete all as specified and as directed by Engineer-in -charge.

Supply only Shaft for exhaust fan ( good quality of mild steel). 300/450 mm sweep complete all as specified and as directed by Engineer-in -charge.

Taking down Wall mounted fan of size 600 mm of any type, any make ,by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares by new one, re-assembling of all components in original position, cleaning, oiling greasing, testing and fixed in original position. Note: New spare parts required for replacement shall be measured and paid separately as 'Supply only'.

Supply only Ball bearing complete all as specified and as directed by Engineer-in -charge.

Supply only Shaft ( good quality of mild steel) complete all as specified and as directed by Engineer-in -charge.

Supply only Metal bush bearing complete all as specified and as directed by Engineer-in -charge.

Supply only Blade 600 mm sweep complete all as specified and as directed by Engineer-in -charge.

Taking down cabin fan/wall mounted of size 400/450 mm of any type, any make, by opening of body carefully checking for repalcement of unserviceable spares, including replacement of spares with new one, re-assembling of all components in original position, cleaning, oiling, greasing, testing and fixed in original position. Note: New spare parts required for replacement shall be measured and paid separately as 'Supply only'.

Supply only Ball bearing complete all as specified and as directed by Engineer-in -charge.

Supply only Shaft ( good quality of mild steel) complete all as specified and as directed by Engineer-in -charge.

Supply only Metal bush bearing complete all as specified and as directed by Engineer-in -charge.

Supply only Blade for 400 mm sweep cabin fan/wall mounted fan complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of copper flexible wire twin core of size 23/40 all as directed.

Supply and fixing as in repair of PVC canopy for 1400 / 1200 mm sweep ceiling fan complete all as specified and as directed by Engineer-in -charge.

Supply and fix in repair Capacitor 4.0 mfd capacity complete all as specified and as directed by Engineer-in -charge.

Material and labour for spray painting of ceiling fan of size 1200/1400mm sweep with synthetic enamel white paint including preparation of old painted surface including writing of 'MES No' in specified height and width of letters complete all as specified and as directed by Engineer-in -charge.

Material and labour for spray painting of Exhaust fan of size 300/450/600 mm sweep with synthetic enamel firoja blue paint including preparation of old painted surface including writing of 'MES No' in specified height and width of letters complete all as specified and as directed by Engineer-in -charge.

S&F of 25 Liters capacity geysers ISI marked vertical type white / off white, copper container inner tank with fiber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat / automatic thermal cut off with ON/ OFF/ CUT out indicators all pre - wired and additional safety accessories like pressure release valve / pressure reducing valve , non-return valve , including new PVC heavy duty pipe with brass ferrule fittings for HOT and COLD water connections fixed in same or new location as ordered as per manufacturers instruction with suitable size nuts & bolts & making necessary connection and testing on completion including removing of old unserviceable geyser and depositing in AGE EM1 store yard complete all as specified and directed by Engr-In-Charge.

Supply and fixing as in repair of MS black tube, medium grade, 20mm bore, for hanging only ceiling fan including necessary cutting, drilling, threading complete all as specified and as directed by Engineer-in -charge.

M&L for Rewinding of ceiling fan, 1200/1400 mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished complete all as specified and as directed by Engineer-in -charge. Note : Necessary gate pass,purchase vouchers of copper winding wire and details of ceiling fan with necessary MES No shall be submitted along with RAR/FB for Payment and rewinding shall be got executed through OEM authorised agency only.

M&L for Rewinding of wall mounted fan 600 mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed by Engineer-in -charge. Note : Necessary gate pass,purchase vouchers of copper winding wire and details of wall mounted fan with necessary MES No shall be submitted along with RAR/FB for Payment and rewinding shall be got executed through OEM authorised agency only.

M&L for Rewinding of Exhaust fan, 300 mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed by Engineer-in -charge. Note : Necessary gate pass,purchase vouchers of copper winding wire and details of exhaust fan with necessary MES No shall be submitted along with RAR/FB for Payment and rewinding shall be got executed through OEM authorised agency only.

M&L for rewinding of exhaust fan 450 mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and Supply and complete all as specified and as directed by Engineer-in -charge. Note : Necessary gate pass,purchase vouchers of copper winding wire and details of exhaust fan with necessary MES No shall be submitted along with RAR/FB for Payment and rewinding shall be got executed through OEM authorised agency only.

M&L for rewinding of exhaust fan 250 mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and Supply and complete all as specified and as directed by Engineer-in -charge. Note : Necessary gate pass,purchase vouchers of copper winding wire and details of exhaust fan with necessary MES No shall be submitted along with RAR/FB for Payment and rewinding shall be got executed through OEM authorised agency only.

M&L for rewinding of wall mounted fan 400 mm sweep with super enamelled copper wire and insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed by Engineer-in -charge. Note : Necessary gate pass,purchase vouchers of copper winding wire and details of exhaust fan with necessary MES No shall be submitted along with RAR/FB for Payment and rewinding shall be got executed through OEM authorised agency only.

M&L for shifting only cabin wall mounted fan from one position to another as directed by Engineer-in-charge and hanging the same with necessary flexible cable from ceiling rose to fan complete all as specified and as directed by Engineer-in -charge.

M&L for cutting /making provision for opening in cement mortar brick/block wall masonry including providing, fixing and removing shoring,cleaning,internal plastering and removing surplus debris,rubbish not exceeding 50 m including fixing of exhaust fan of size 250-450 mm complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair fastener bolts with nut and washer of size 3 inch long with complete all as specified and as directed by Engineer-in -charge.

Taking down of unserviceable geyser of 25/50 ltr capacity of any make from the wall after disconnecting and opening of nuts and bolts carefully for repair and testing in MES store yard for ascertaining repair, refixing the same after repair/replacement of nuts and bolts, connecting to water mains and electric supply, after carrying out the repair work/ replacement complete all as specified and as directed by Engineer-in-charge. Note : Any spare which is required to be replaced under this item shall be measured and paid separately under relevant items as "Supply only"

Supply only Heating element 1.5 KW of geysers at the same place complete complete all as specified and as directed by Engineer-in -charge.

Supply only Heating element 2.0 KW at the same place complete all as specified and as directed by Engineer-in -charge.

Supply only Thermostat switch at the same place of geysers complete all as specified and as directed.

Supply only LED Indicating Lamp at the same place of geyser complete all as specified and as directed.

Supply only 23 to 30 cm long ,10 mm bore chromium plated Connection with brass union at the same place of geyser complete all as specified and as directed.

Supply only gun metal non return valve ,15 mm bore complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 15mm bore PVC connection pipe 45 cm long , with brass union both ends fixed to GI Pipe at the same place of geyser complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of Plug top 3-pin, 16 Amp geyser complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of 2.5 sqmm copper cable three core rubber insulated complete all as specified and as directed by Engineer-in -charge.

Supply and fixing as in repair of air pressure release safety valve 15mm dia as approved/ordered suitable for geyser of 25/50 Ltrs capacity complete all as specified and as directed by Engineer-in -charge.

A. R. ELECTRICALS

M/s Pooja Enterprises

PTech Engineers