Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical REJECT |
Tender Value
₹84.8 L
EMD Value
₹85,000
Closing Date
12 Oct 2023, 12:00 pmClosed
SE, EUDC, MATHURA
SE, EUDC OFFICE, NEAR TANK CHAURAHA, MATHURA
Carrying out various electric works on Semi Turn Key Basis for System Strengthening in Business Plan Scheme in the area of EE, EUDD III, Mathura under the jurisdiction of SE, EUDC, Mathura
2023_DVVNL_840640_4
46/EUDC(M)/2023-24
Open Tender
Electrical Works
Turn-key
90 days
EE, EUDD III
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,000
dvvnl.org
₹85,000
10 Nov 2023
4 Oct 2023
12 Oct 2023
4 Oct 2023
12 Oct 2023
4 Oct 2023
Cartage of following material from Store centre, Mathura to work site.
STP 13 Mtr. Long (SP-70) Bottom Portion Galvanized
STP 11 Mtr. Long (SP-55) Bottom Portion Galvanized
Clamp with nut & bolts
11 KV D/O Fuse Set
11 KV Pin Insulator with pin
ACSR Ins. Weasel Conductor
ACSR Dog Conductor
Stay Complete with Grouting
11/0.4 KV, 100 KVA T/F
11/0.4 KV, 250 KVA T/F
LT XLPE Cable 1x400 Sqmm.
LT AB Cable (3x120+1x70+1x16) Sqmm.
Barbed Wire
11 KV XLPE Cable 3x70 sqmm.
Cable Jointing Kit outdoor For 3x70Sqmm.
11 KV XLPE Cable 3x185 sqmm.
Cable Jointing Kit outdoor For 3x185Sqmm.
Cable Jointing Kit S.T. For 3x185Sqmm.
11 KV 'V' Type Cross Arm
Holding Clamp for Cross Arm
11 KV VCB, O/C CTR 200/100/5A, 350 MVA
11 KV Adopter Panel for bus bar arrangement
Cartage of above material like various size 33 KV, 11 kv cable, dog/weasel conductor, Jointing kit, vaccume interrupter, distribution transformers, ST/PCC Pole, insulator, control panel, pin insulator, bus isolator, brass glands, channel, clamps etc. from Store Center, Mathura to work site and dismentled material from site to dvvnl store.
Digging of pit & erection of new single support ST Pole (13/11 mtr. long) including grouting of pole and fixing of all clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.
Digging of pit & erection of new Double Pole Structure ST Pole (13/11 mtr. long) including grouting of pole and fixing of all Sturucture accessories, clamps, cross arm, pin/disc insulator & other accessories with providing stone pad as per relevant drawings. Any fabrication if required for above support.
Concreting of Pole As per Approved Drawing & Technical sepicifition
Providing & fixing of Stone Pad
Painting of pole with 1 coat of red oxide & 2 Coat of Al. paint
Providing & Fixing of MS Top Channel
Providing & Fixing of MS Dropper Channel
Providing & Fixing of Holding Clamp for STP/PCC with nut & bolts
Fixing of Clamp with nut & bolts
Fixing of 11 KV D/O Fuse Set
Fixing of 11 KV Pin Insulator with pin
Laying of ACSR Ins. Weasel Conductor
Erection, laying, Testing & commissioning of ACSR Dog Conductor
Fixing of Stay Complete with Grouting
Earthing of Pole, Body & Neutral Earhing of T/F by Earth rod
Erection, Testing & commissioning 11/0.4 KV, 100 KVA T/F
Erection, Testing & commissioning 11/0.4 KV, 250 KVA T/F
Laying of LT XLPE Cable 1x400 Sqmm.
Laying of LT AB Cable (3x120+1x70+1x16) Sqmm.
Fixing of Barbed Wire
Providing & Fixing of MS Nut, Bolt and Washer's
Providing & Fixing of Danger Board with clamp
Providing & Fixing of Extra Guarding Angle
Providing & Fixing of Guarding Angle
Providing & Fixing of I Bolt 12x15 mm.
Providing & Fixing of Binding Wire
Providing & Fixing of G.I. Wire 6 swg
Providing & Fixing of G.I. Wire 10 swg
Providing & Fixing of LT Pin Clamp For ST/PCC Pole
Digging of trench by Making pits/open trench method/HDD method after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites department and laying, Testing, Commisiong & energization of cables of 11 KV size 3X70 Sq mm. XLPE by manual drill (by making moles) /HDD method/ open trench Including all material Like brick & sand and Back filling and restoring the road to make as original.
Laying of Cable pole to pole 11 KV XLPE Cable 3x70 sqmm.
Fixing of O/D Cable Jointing Kit Suitable for 11 KV 3x70 Sqmm. XLPE Cable
Digging of trench by Making pits/open trench method/HDD method after due survey with the help of utility detector of existing electrical/telephonic cable/and other utilites of public utilites department and laying, Testing, Commisiong & energization of cables of 11 KV size 3X185 Sq mm. XLPE by manual drill (by making moles)/HDD method/ open trench Including all material Like brick & sand and Back filling and restoring the road to make as original.
Fixing of O/D Cable Jointing Kit Suitable for 11 KV 3x185 Sqmm. XLPE Cable
Fixing of Cable Jointing Kit Straight Through for 3x185Sqmm.
Providing & Fixing of G.I. Pipe
Providing & Fixing of G.I. Pipe Clamp
Providing & Fixing of 11 KV MS Angle 65x65x6x2700 mm. Bracing Set with 04 No. Clamp
Fixing of 11 KV 'V' Type Cross Arm
Providing & Fixing 'F' Bracket
Fixing of Holding Clamp for Cross Arm
Complete Gel earthingof 11/0.4 KV 250/400 Distribution Transformer by digging pits 6” dia upto 3 mtr. deep including chemical filled pipe in between (pipe-in-pipe) ISI mark B Grade & connecting with G.I strip of size 50mm X 6mm with neutral/body of 11/0.4 KV distribution transformer to above pipe-in-pipe (PIP) and filling of chemical crystalline conductive mixture containing highly conductive material around the (pipe-in-pipe) up to 3 Mtr. including making of chamber at the top of the earthing. Other details are as below:- 1.Earth pipe material – mild steel, Galvanised. 2-Main Electrode diameter – 42.4mm. 3-Auxiliary Electrode pipe, Diameter – 76mm. 4-Wall Thickness of main Electrode :- 2.6mm. 5-Wall thickness of auxiliary Ist whole:- 3.2mm. 6- Length of earthing electrode (PIP):- 3 Meter.
L/C for Construction of Dist. T/F plinth size 1.2x1.2x1.2 cubic mtr. with solid brick work 75 mm thick C.C. in ratio 1:4:8 with cement, coarse sand and brick ballast and smooth finshing. All material will be provided by contractor.(1 No.)
L/C for Fabrication, erection and painting with synthetic enamel bus green paint of T/F fencing jali with one side gate, welded fabricated wiremess 10 SWG with size 35x4 mm M.S. Flat X-bracing of frame size 10x8 Feet. (4 No.) including cost of M.S. Angle 40x40x5 mm M.S. Flat 35x5 mm and Nut & Bolt with washer. All material will be provided by Contractor. (1 No.)
Providing & Fixing of Alluminium Lug 150 sqmm.
Providing & Fixing of Alluminium Lug 400 sqmm.
Erection, Testing & commissioning of 11 KV VCB, O/C CTR 200/100/5A, 350 MVA
Providing, installing & Fixing of 11 KV Adopter Panel for bus bar arrangement
Providing, & Fixing of Erection of 40 mm dia Class 'B' G.I. Pipe 80 feet long socket, cutter and G.I. Strip 50x6 mm along with nut and bolts with washer & required for power T/F, 33 KV VCB, 11 KV VCB, 33 KV Control relay panel etc.
Providing & Fixing of 40 mm dia Class 'B' G.I. Pipe 40 feet long socket, cutter and G.I. Strip 50x6 mm along with nut and bolts with washer.
Shifting of A- Type Panal
Dismentling of Existing Old & used 11/0.4 KV, 100 KVA T/F with all connected accessories
Dismentling of various size old & used ST Pole with all connected accessories
Dismentling of ACSR Dog Conductor (Scrap)
Dismentling of ACSR Weasel Conductor (Scrap)
Dismentling of Old & used 11 KV O/G. VCB with all connected accessories
Proper Road Restoration Kaccha/Pakka (If required) Rates shall be acceptable, if not given above for the same work.
M/s G.D. Electricals
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .