CONSTRUCTION OF 3KLD CAPACITY FAECAL SLUDGE TREATEMENT PLANT IN KEELANAPURA GRAM PANCHAYAT PREMISES OF MYSURU TALUK

CONSTRUCTION OF 3KLD CAPACITY FAECAL SLUDGE TREATEMENT PLANT IN KEELANPURA GRAM PANCHAYAT PREMISES OF MYSURU TALUK

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour with ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anch...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing non load bearing wall with solid concrete blocks of size 400x100x200mm having a block density not less than 1800kg/m3 having a minimum average compressive strength of 4.00 N...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement :...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing 12mm thick cement plaster in single coat with cement mortar 1:4, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including...

Providing rough cement plastering 15mm thick in single coat with cement mortar 1:6 to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, includ...

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ...

Providing cement mortar of mix 1:2 (1 cement : 2 sand) including cost of all materials, labour charges, HOM of machinery complete as per specifications.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and applying painting in two coats with plastic emulsion paint of approved brand shade on ceiling and / or sloping roof after throughly brushing the surface, free from mortar drops and other...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

110 mm dia tees

110mm dia elbow

160mm dia tee for support

110mm perforated pipe

Providing and laying of coarse aggregate size as below after washing and sieving to make it free from fines and dust.120 mm nominal size (at center)

Providing and laying of coarse aggregate size as below after washing and sieving to make it free from fines and dust. 20 mm nominl size

Providing and laying of coarse aggregate size as below after washing and sieving to make it free from fines and dust. 53 mm nominal size

Providing and laying of coarse aggregate size as below after washing and sieving to make it free from fines and dust. 6 mm nominal size

Providing and laying of coarse aggregate size as below after washing and sieving to make it free from fines and dust. Sand/Artificial Sand/Manufactured Sand (0.75 to 4.75mm)

Providing and laying of coarse aggregate size as below after washing and sieving to make it free from fines and dust. Cinder

Providing and laying of coarse aggregate size as below after washing and sieving to make it free from fines and dust. 12-10 mm nominal size

Supplying/Casting and fixing Precast Reinforced Cement Concrete perforated slabs (2 dia hole) of following thickness in RCC 1:2:4, using following HBGS jelly including cost of reinforcement steel in ...

Supplying/Casting and fixing Precast Reinforced Cement Concrete perforated slabs (2 dia hole) of following thickness in RCC 1:2:4, using following HBGS jelly including cost of reinforcement steel in ...

Supplying and errection of RCC rings for well steining of 0.3 Mtr Depth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compacted incl...

Precast Concrete Cover 600 mm x 600 mm x 50 mm

Precast Concrete Cover 1650mm dia (top slab)

Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...

Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost ...

Loading and unloading of polythene bagged seedlings: Loading of polythene bagged seedlings into vehicle at the nursery site and unloading at site nearest to planting site. Seedlings raised in 14 X 20...

Transportation of polythene bagged seedlings in hired truck from nursery site to plantation site. Seedlings raised in 14 X 20 bags : Distance upto 10km (per 1000)

Conveyance of polythene bagged seedlings on head load from dumping site to planting location, near each trench/pits (Distance upto 3km) (per 1000)

Planting of polythene bagged seedlings after tearing with blade and removing polythene bags in trenches/pits including scooping soil to required depth , pressing soil gently around seedling after plan...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing precoated galvanized iron profile sheets (size, shape, and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 ...

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns ep...

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...

Providing skirting, dadooing, rises of steps with colour glazed tiles 10mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...

Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing in...

Providing and fixing white vitreous china clay, water closet Indian type (Squatting pan) of size 580mm with footrests, 100mm S or P trap, 10 litre low level, PVC flushing cistern (all are a...

Providing and fixing white vitreous china clay, flat back, lipped front urinal basin of 430x260x350mm with 5 litres PVC automatic flushing cistern, C. I I M.S brackets, standard flush pipe and C ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing in position brass bib cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Providing and fixing 100 mm sand cast Iron grating for gully trap. Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in M-15 as per dire...

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing ...

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing ...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Supply and delivery of Centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments(2 HP, Size 65x50 Head 13M, Discharge 462 LPM)

Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/ casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC i...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with ...

Supplying of feet - PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 80. Power Input: 220-240V ...

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2 , extending through the full width of the structure with ...

Providing, fabricating,fixing of SS Screens using SS 304 bars, 20 mm spacing of 4 mm thick with handle (7.5kg) including cost of material, transportation, labour charges etc complete as per direction ...

110 mm dia end Cap