PROVN OF PARKING AREA NEAR NLDG NO.272 AND SPECIAL REPAIR TO BLDG NO. 331 AT VSN NAGPUR

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for Kota stone flooring 20-25mm thick over and including 20mm screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

Ditto- all as per item No 3 above but on vertical surfaces as in skirting/making 3 nos of 3mm thick grooves on edge of treads of staircase etc all as specified and directed.

M&L Marble work 18 to 20mm thick (table rubbed and polished) Makrana white in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with marble shade all as specified and directed.

M&L non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over and including 15 mm screed bed in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles all as specified and directed.

M&L Rendering 10mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces for walls, vertical tiles etc all as specified and directed.

M&L Glazed Ceramic colour tiles in vertical surface of size 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour complete as specified and directed

Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

M&L Brickwork with sub class 'B' Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:4) complete all as specified and directed. [5+18]

Taking down cement plaster on brick or stone wall, concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for Rendering 15mm thick in CM 1:6 including finishing even and smooth without using extra cement complete all as specified and directed.

M & L Preparation of old plastered wall surfaces with complete removal of existing treatment and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

M & L Preparation of Newly plastered external wall surfaces by applying two coats of cement base paint over a coat of primer and over 3mm thick wall care putty complete all as specified and directed [20+120]

M & L Preparation of Newly plastered wall surfaces by applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

M & L Preparation of Newly plastered ceiling surfaces by applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

M & L Preparation of Old plastered ceiling surfaces by applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

S&F Aluminium Framed doors with shutters glazed with 5 mm tined glass/12 mm thick toughened glass with one side visibility using powder coated aluminium sections of approved make confirming to IS complete all as directed..(aluminium member shall not be less than 1.5mm thickness).(Glazing shall be measured and paid separately)

S&F Aluminium Framed Windows with Aluminium Grill(As per Manufactures instruction and Thickness as per IS) and shutters glazed with 5 mm thick tinted glass with one side visibility using powder coated aluminium sections of approved make confirming to IS complete all as directed..(aluminium member shall not be less than 1.5mm thickness).Glazing shall be measured and paid separately)

S&F Toughened glass 12 mm thick, for door /partition of approved colour design and logo(if required any type)slide opening or sliding type with complete fittings of make DORMA or equivalent as equivalent as approved including pivot hinge /floor spring handle locking device with duplicate key etc & connecting job like tile cutting demolition pcc platering,painting etc.confirming to IS all as specified and directed.

S&F Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one all as specified and directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.. Including taking down old floor spring hydraulically .

Taking down of chowkats with shutters (without taking off shutters from the frame) n.exe 1.5 sqm each all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exe 1.5 sqm but n.exc 4sq.m all as specified and directed.

S&F Wash hand Basins , white ,Under counter basin round,Dia 455,Cat No-110302,Make-Somani.complete all as specified and directed.

S&F 'KAMP' Ext wall hung Toilet, size 375 x660 x 770 mm ,P-Trap,170 mm Cat No-120302,(with ezee close seat cover.)Make-Somani.all as specified and directed

S&F Health Faucet with hook and 1.5 mtr tube full brass 15 mm.Make -JAINKO.Cat.No-HFJ-2

S&F Pillar cock Chromium plated, 15mm, Make-Jainko,Cat No-PCJ-6

S&F Bib Cock, Chromium plated, 15mm, Make-Jainko,Cat No-BTJ-3

S&F Angle Valve, Chromium plated, 15mm, Make-Jainko, Cat No-AVJ-3

S&F Soap dish holder (CP Brass) MAKE-Jaguar Cat No.-ACN-1131N

S&F Towel Rod. Make-Jaguar Cat No.ACN-1111NM

S&F Toilet Roll Holder with Flap. Make-Jaguar Cat No.ACN-1153N

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

Taking up or down steel tubing of 15mm and connections, including cleaning for refixing complete all as specified and as directed

Taking up or down steel tubing of 20 mm and connections, including cleaning for refixing complete all as specified and as directed

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 15mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

S&F GI Tubes, ‘medium grade’, galvanised, Concealed with all fitting 20 mm including cutting of Stone , Concrete Block or Slab walls and making good complete as specified and directed

Dismantling water tanks 500ltrS to 1000 ltrs complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S & F stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed

S& F Ball brass valve 20 mm dia high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed

S&F PVC Door frame of size 50 mm x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as specified and directed..

S&F Factory made solid panel PVC Door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rail & bottom on either side & as a gap insert for top rail & bottom rail , paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement .

S&F 2 levers Brass Mortise lock for Aluminium Door, size 100 mm all as specified and directed.

S&F Aluminium door stopper with rubber shoes, overall length,150mm complete all as specified and directed

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed

S&F Extruded Aluminium bow handles of size150 mm complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200mm size complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100mm size complete all as specified and directed

Excavation in post holes ( or similar holes) in any type of soil each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm , watering, and removing surplus soil to a distance n.exc 50m and making good surface completed all as specified and directed.

M&L PCC (1:2:4) type B-1(20 mm graded aggregate) for embedding post completed all as specified and directed.

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

M&L Mild steel plates (plain or chequred) channel square cut notched ordinary and counter sunk forming holes without any attachment for Fe-410w grade E-250 quality A complete all as specified and directed.

S&F Mild steel Screw bolts (machine made) with hexagonal or square head at one end and screwed the other end n.exc 5 cm long and diameter of neck exc 5 mm but n exc 10mm dia complete all as specified and directed.

S&F Pre-painted galvonium aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Map as in roof covering / cladding to wall, fixed with self tapping screw all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Hardcore of gauge n.exc 63mm deposited ,spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 75mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) as in sub-base, floor complete all as specified and directed.

Material and labour for screed bed or bedding layers of 15 mm thick cement mortar (1:6) for laying floor finishes all as specified.

Material and labour for chequered cement concrete tiles 250 mm x 250 mm x 25 mm thick, set, jointed and pointed in net cement slurry @ 3Kg/Sqm with grey cement and colour pigment in floor all as specified.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

M&L for PCC (1:4:8) type D-2(using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 including finishing even and smooth without using extra cement complete all as specified\ and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

M&L for Providing precast cement concrete CM 1:4 (Type BO, 1:2:4),12.5 mm graded stone aggregate, jalies,25mm thick (measured solid), including all mould- ings complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height,copings,kneelers,apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.

Returning and filling in including spreading . leveling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance exc 1.50Km but not exc. 5.00Km, inside or outside MD land and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and as directed.

M&L for providing Reinforced Concrete Cement M-25 Nominal mix (using 20mm graded stone aggregates) as in foundations including rafts, footings, beams, plinth beams, bases for columns etc. basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for providing Reinforced Concrete Cement M-25 Nominal mix as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Ditto all as per item 72 above but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, plinth beams and similar work with rough finish surfaces of concrete flat complete all as specified and directed.

M&L for Formwork to sides of pillars, posts,struts,piers,columns and stanchions complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg)as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds all as specified.

M&L for Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings and hanging, also fastening and fixing complete all as specified and as directed.

M&L Applying 2 coats of Synthetic Enamel paint over a coat of Red Oxide zinc chrome primer on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

dhanshree enterprises

Harsh Construction Company