Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC PLOT NO 26 1ST FLOOR PRATAP NAGAR NEAR JAIL ROAD NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹14.8 L+₹1.9 L (15.0%)Rejected-Finance | L2 | Rejected-Finance HIGHER RATE | |
| 3 | L3₹15.7 L+₹2.9 L (22.2%)Rejected-Finance 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | L3 | Rejected-Finance HIGHER RATE | |
| 4 | L4₹15.9 L+₹3.0 L (23.2%)Rejected-Finance B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L4 | Rejected-Finance HIGHER RATE | |
| 5 | L5₹17.3 L+₹4.5 L (34.7%)Rejected-Finance | L5 | Rejected-Finance HIGHER RATE |
Tender Value
Refer Docs
EMD Value
₹46,950
Closing Date
25 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI, SP MARG NAR ABHM GATE NO 5
ADDITION / ALTERATION TO TOUGHENED GLASS AND ALLIED SERVICES NEAR LIFT LOBBY OF EACH FLOORS ALONGWITH MAIN GATE AND CERTAIN LOCATION AT NOM VARUNA UNDER GE NEW DELHI
2024_MES_648533_1
NIT No GE/ND-95/2023-24
Open Tender
Civil Works
Item Rate
330 days
GE NEW DELHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NEW DELHI
₹46,950
Yes
4 Jun 2024
30 Mar 2024
27 Apr 2024
30 Mar 2024
25 Apr 2024
20 Apr 2024
Amount
Taking down chowkhats or frame with shutters without taking of shutters from frames exc 1.5 Sqm each at any description & removing form site complete all as specified and directed.
Taking down chowkhats or frame with shutters without taking of shutters from frames not exc 1.5 Sqm each & removing form site incl making good disturbed portion complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) removing debris out of MoD land complete all as specified and directed.
M&L for 25mm thick cement concrete type B-1,1:2:4 (12.5mm graded aggregate) as in sub bsae floor finishing the cement concrete surface even and smooth using extra cement complete all as specified and directed.
Dismantling wall and ceiling boards of any description as in panelling any thickness, including cover fillets in any surface complete all as specified and directed.
M&L for Providing PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed. Make: Rajshri or equivalent of make as specified in PS or as approved by GE.
M&L for PVC 'L' angles fixed at where direction changed portion with adhessive or as per manufacture instruction complete all as specified and directed.
Roughening surface of old concrete surfaces by picking and sweep clean and washing down with water to remove dust at any type of floor complete all as specified and directed.
M&L for GI powder coated micro preforated micro look false ceiling with fleece lay-in-type, 0.50mm thick, suitable for grid/frame module of 600mm x 600mm size complete with GI powder coated grid consisting of silhonthe main T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspented by 4mm GI rod from roof slab including steel fastner wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm celing etc complete all as per specified and directed.
M&L for vitrified ceramic dark coloured double charged tiles10 mm thick (square /rectangular) area of each tiles not exceeding 0.36 sqm, or 600x600x10mm thcik in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 20mm thick Screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.
Hacking out old broken glass exc 1.5sqm ( any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds with putty or fixed with beads complete all as specified and directed.
Taking out old serviceable glass of any description exc 1.05 sqm, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size, hacking out old putty or removing beads etc, incl making good breakages in taking out and handling removing to store or stacking for reuse complete all as specified and directed.
M&L for 12mm thick toughned glass (frosted/ non frosted) door/ pannel (Saint gobain or equivalent of Make as specified in PS or as approved by GE) fixed with stainless steel floor springs, 2nos of stainless steel handle 600mm long fancy type in each shutter fixed to glass door, pasted film of approved design on the glass complete incl all fiittings (Ozone or eqv approve make) like Door handle, Floor spring , Patch fitting , L connector etc complete all as specified and directed. Note: Floor spring for main gate and other gate, and handles more than 600mm of fancy type of ss/brass shall be measured and paid seprately.
Supply only 32 mm dia 900 mm long fancy handle suitable for glass door complete all as specified and directed.
Supply only Stainless steel body and internal machanism heavy duty concealed floor spring suitable for 12mm thick glass door of any span fixed on tiles or granite surface complete all as specified and directed
Supply and fix stainless steel body locking arragement suitable for glass door complete all as specified and directed
M&L for providing and injecting chemical emulsion for post constructional ATT of existing floors using emulsion @ one litre per hole 300mm apart including and plugging 12mm dia holes with cement mortar 1:2 to match with existing floor complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but incl ashlar facings, dressed stonework and precast concrete articles complete all as per specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as per specified and directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as per specified and directed.
M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as per specified and directed.
Dismanling stone slab and tiles of any description or thickness in floor, appron laid bedded and pointef in any mortar etc complete all as specified and directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 complete all as specifeid and directed.
M&L for rounding the edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specifeid and directed.
M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed or bedding layer in cement morter 1:6 as in floor complete all as specified and directed.
M&L for glazed ceramic coloured tiles 300 x 200 x 7mm thick ( square/ rectangular) area of each tiles in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles over 10 mm thich rendering in cement mortar 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing the rubbish out of Mod Land complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 on brick work or concrete surfaces finishing even and smooth without using extra cement complete all as specified and directed.
M&L 10mm thick rendering on ceiling surfaces in Cement morter 1:3 finish even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new/old untreated plastered surface of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surface of ceilings and applying three coats of white wash complete all as specified and directed.
M&L for 100 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) complete all as specified and directed.
M&L for two coats of oil emulsion distemper over a coat of alkali resistant primer incuding preparation of newly plastered surfaces complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 18-20 mm thick over scment screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L 15mm thick rendering on fair or other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compount @200 ml/Bag of cement finish even and smooth without using extra cement complete all as specifeid and directed. Note: WPC shall be measured and paid seperately
Supply only water proofing compound liquid complete all as specified and directed.
M&L for 12 mm thick gypsum board in false ceilingin size of 600mm x 600 mm to fixed on aluminum grid complete all as specified and directed. (Frame work for celing shall be measured and paid seprately) complete all as specified and directed.
M&L for anodised aluminum snab grid frame work for false ceiling in size of T angle 25mm x 32mm x 1.50mm and perimetor angle 25x25x1.2mm thick and comple all as specified and directed.
M&L for Hangers 6 mm dis GI (upto 1200 mm length) adjusting level fixed to roof slabes by means of celing cleats made out of GI flat 40 x3 mm size 60 mm long complete all as specified and directed.
M&L for one coat of oil emulsion distemper on old painted surface incluidng preparation complete all as specified and directed.
M&L for one coat of cement base paint on old painted surface incluidng preparation complete all as specified and directed.
Supply and laying of coarse sand/crushed stone sand for laying of paver block complete all as specified and directed.
M&L for machine pressed precast concrete interloking paver block with grey cement and pigments any shape and size confirming to IS 15658 - 2006 of 60 mm thick M-35 grade complete all as specified and directed.
M&L for two coats of oil emulsion distemper over a coat of alkali resistant primer and over a coat of wall care putty incuding preparation of newly plastered surfaces complete all as specified and directed.
M&L for preparation of new or old plasterd wall surfaces and applying 1.5 mm thick JK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resisstane primer and applying two coats of exterior emulsion first quality (APPEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI) or equivelent as approved) of approved colour complete all as specified and directed.
M&L for one coat of Exterior emulsion paint including preparation of old surfaces filling with putty where required complete all as specified and directed
Complete removal of existing painted surfaces and removal of rubbish out side defence land complete all as specified and directed.
M&L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4, set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone complete all as specified and directed. Note:- Size and colour of stone to be matched with existing stone
S&F Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sq. m area and not exceeding 0.5 sq. m fixed with and including one number SS clamps (grade-202) of flat-30mm X 2mm , making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment complete all as specified and directed. Note:- Size and colour of stone to be matched with existing stone
M&L for factory made brown colour solid WPC (wood particle composite) door frame of size 100mmx63 mm double rebate 100% lead free made from single extruded process material with density 0.78 Kg/RM complete all as specified and directed. Make: Rajshri or equivalent of make as specified in PS.
Providing and fixing 30 mm factory made solid WPC (wood particle composite) moulded door shutter single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter not less than 600Kg/Cum shiuld be 100% lead free door complete all as specified and directed. Make Echon Cat No LPD-I 1 or equivalant of make as specified in PS.
S&F 200 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed.
S&F Brass sliding door bolts 250 mm long and fixed with brass screws to wooden doors complete all as speciifed and directed.
S&F Brass butt hinges 125 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed
S&F factory made designer scantling ( Architraves, soffit, linning etc)of wood/engineering wood of max lenth of 5m , width up to 1.5m and thickness max 50mm all around the frame of door/window/partion complete all as specified and directed.
M&L for Ist class hard wood plain, solid, straight and segmental worked from sloid chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
S&F Ist class teak wood 35mm thick panelled shutters plain, framed, panelled shutters ( any number of panels) with panels of timper feather edged teak wood planks supplied and fitted to chowkats complete all as specified and directed.
M&L for French polishing on surfaces of any description with or girth incluidng cleaning and preparing the surface including a coat of wood filler on new/old untreated surfaces works with two or more coats till the surface smooth complete all as specified and directed.
Removing of demolished material out of defence land complete all as specified and directed.
B S R Enterprises
A N BUILDERS
BEHAL TRADERS
DEV CONSTRUCTION
friends associeates
GLIBS CONSTRUCTION
M/S SONU ENTERPRISES
J S CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .