Covering of Open-Air Theatre at NIT Kurukshetra

of Earth up to 5 km

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means

over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as

directed by Engineer-in charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

3 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by cum 847.88 190.71 161696.64

ramming and watering, lead up to 50 m and lift up to 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or

stacked materials.

4.1 2.26.1 All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

6 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

6.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 216.40 381.56 82570.01

6.2 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 1437.56 935.34 1344612.54

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

7.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 18253.85 104.94 1915523.46

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

8.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 21962.15 104.94 2304665.05

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

Providing and laying in position ready mixed or site batched design mix cement concrete

for reinforced cement concrete work; using coarse aggregate and fine aggregate derived

from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,

admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of

concrete, to improve durability and workability without impairing strength; including

pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost

of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-

9 5.33 charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in design

mix shall be payable separately. In case the cement content in design mix is more

than 110% of the specified minimum cement content, the contractor shall have

discretion to either re-design the mix or bear the cost of extra cement.

9.1 5.33.1 All works upto plinth level

a 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 186.03 9248.12 1720395.72

9.2 5.33.2 All works above plinth level upto floor V level

a 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 223.82 9594.17 2147348.48

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc.,

including cutting, hoisting, fixing in position and applying a priming coat of approved steel

primer, including welding and bolted with special shaped washers etc. complete.

10.1 10.16.2 Hot finished seamless type tubes kg 140315.00 200.78 28172242.24

Structural steel work riveted, bolted or welded in built-up sections, trusses and framed

10.1 work, including cutting, hoisting, fixing in position and applying a priming coat of approved kg 1000.00 114.18 114181.55

steel primer all complete.

Structural steel work in single section, fixed with or without connecting plate, including

10.2 cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all kg 1000.00 130.09 130090.10

Providing and fixing acoustic metal sandwich roofing panels at roof level over pre-installed

MS framework, including fixing accessories, fasteners, laps and joint sealing to ensure

watertight roofing, complete as per approved drawings and instructions. Rate shall include

material, labour, tools, wastage and all incidentals required for completion of the work,

excluding MS framework and scaffolding. Total thickness 100 mm including coil thickness

top and bottom shall be 0.5 mm.

12.0 MR Providing and fixing of 0.8 mm thick GI gutter rm 115.55 2699.00 311869.45

Painting with synthetic enamel paint of approved brand and manufacture to give an even

13.1 13.62.1 Two or more coats on new work sqm 1849.88 220.14 407233.86

I SUB HEAD (I) :- INTERNAL WIRING

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

1 Point wiring

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface / recessed medium class

1.10 PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

2 Group/Loop Control Point wiring in PVC conduit, with modular type switch :-

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor

1.55 single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq.

mm FRLS PVC insulated copper conductor single core cable etc. as required.

2 Twin Control Point wiring in PVC conduit, with modular type switch :-

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, 2 way modular switch,

modular plate, suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable

etc. as required.

3 Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :-

Wiring for light /power plug with 2 x 4 Sq.mm. FRLS PVC insulated, copper conductor

single core cable in surface / recessed medium class PVC conduit along with 1 no. 4

Sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as

4 Circuit / Sub main wiring in PVC conduit :-

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated,

1.14 copper conductor single core cable in surface/ recessed medium class PVC conduit as required.

Supply and fixing of following sizes of medium class PVC conduit along with accessories

5 1.21 in surface/recess including cutting the wall and making good the same in case of

recessed conduit as required.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess

6 1.3 including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, Each 9.00 464.12 4177.09

connection etc. as required.

7 S/F power plug point modular type accessories :-

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess,

1.3 including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular Each 24.00 570.18 13684.27

switch, connection etc. as required.

8 S/F modular type electronic fan regulator :-

Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch

box including connections but excluding modular plate etc. as required.

9 S/F modular type blanking plate :-

Supply and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

II SUB HEAD (II) :- DISTRIBUTION BOARDS & MCB's

Supplying and fixing 20 A, 240 volts, SPN industrial type socket outlet, with 2 pole and earth, metal

enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess,

1 2.18 with chained metal cover for the socket out let and complete with connections, testing and commissioning

etc. as required.

Supplying and fixing 5 amps. to 32 amps. rating, 240/415 V, 10kA, "C" curve, miniature circuit breaker

2 2.1 (MCB) suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,

MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,

4 2.4 neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/

2.4.2 6 way, Double door Each 1.00 4839.70 4839.70

2.4.3 8 way, Double door Each 2.00 5805.89 11611.78

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,

residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes

in the existing MCB DB complete with connections, testing and commissioning etc. as

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or

6 1.6 in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP EACH 2.00 707.37 1414.74

MCB, "C" curve including connections, painting etc. as required

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess

7 1.6 including providing and fixing 2 nos 3 pin 5/6 amps modular socket outlet and 2 nos 5/6 amps. modular Each 4.00 661.64 2646.56

switch, connection etc. as required.

III SUB HEAD (III) :- LIGHTNING PROTECTION AND EARTHING

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering

pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter

below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt,

spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of

G.I. nut bolt & spring washer spaced at 50 mm)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along

with existing surface / recessed conduit / submain wiring / cable as required.

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing along

with existing surface / recessed conduit / submain wiring / cable as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I.

6 6.2 tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including Each 6.00 504.01 3024.08

holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for

lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for

lightning conductor complete as required.(For vertical run

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long,

9 6.1 with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. each 6.00 117.73 706.40

IV SUB HEAD (IV) :- INTERNAL LIGHTING FIXTURES & FANS

LIGHTING FIXTURES & FANS

Supplying and fixing surface mounted 8-10W LED (600mm) Mirror light, Decorative Box

type Pre wired fitting suitable for 8-10W LED tube, 100 Lm/W completer with connection

testing, commission etc as required. (BAJAJ model No BCLSB 10 WH or equivalent in

Wipro, Philips) (LM 79 & LM 80 reportfrom NABL Accredited lab.)

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

Supply Installation Testing and Commissioning of 1 x 18 to 22 watt 1200 mm LED fitting

made out box type Channel made out of CRCA duly powder coated and suitable for

18watt LED Lamp .The LED lamps should have a system efficacy of 100lumens/watt

having colour temperture of 6000 to 6500, 100Lm/W kelvin, CRI >75, and driver would

2 MR have a power factor >0.9,THD <20% and efficiency > 85%. complete with all accessories Nos. 4.00 686.00 2744.00

and tube etc directly on ceiling /wall i/c connection. with 1.5 sq mm FRLS PVC insulated

copper cond. single core cable and earthing etc. complete as required. (Bajaj model No

BCLSB 18 NW or equivalent in Wipro, Philips) (LM 79 & LM 80 report from from NABL

Accredited lab.)

Supplying, installation, testing & ommissioning of surface type 10W to 12W LED Round

Downlight with pressure die-cast aluminium heat sink & glarefree opal Diffuser. Total

system Lumen of 10W to 12W LED should be 1000 or above in Cool day Light(6000K to

6500K), Power factor>0.95, CRI>80, LED Make- Cree, Nichia,Philips Lumiled, Osram,

3 MR LED Efficacy>100 Lm/W asper Bajaj Cat No BPSLR Surface 12W LED WH RD SD / Nos. 2.00 725.00 1450.00

Philips / Wipro. Complete with all accessories as required with connections.

Supplying, installation, testing & ommissioning of recessed type 15W to 18W LED Round

Downlight with pressure die-cast aluminium heat sink & glarefree opal Diffuser. Total

system Lumen of 15W to 18W LED should be Minimum 1000 or above in Cool day

Light(6000K to 6500K), Power factor>0.95, CRI>80, LED Make- Cree, Nichia,Philips

4 MR Lumiled, Edison, LED Efficacy>100 Lm/W. Complete with all accessories as required with Nos. 16.00 1158.00 18528.00

connections. (Bajaj cat no. BGSLO Sleek Recess RD 15W WH LED, or equivalent in

Wipro / Philips (LM 79 & LM 80 report from from NABL Accredited lab.)

Supply, installation, testing and commissioning of Indoor IP 20 Non-integral flexible LED

strip light with high brightness for indoor applications. 25W LED Flexible Strip Light(5 Mtr)

with driver as per Bajaj cat no. nxt 25W PROFESSIONAL LED STRIP IP20 WH+ Driver

/Wipro Trilux / Philips or EQ.

Supplying, installation, testing & ommissioning of recessed type 30W to 36W Full window

glarefree opal Diffuser LED Panel of size 595X595mm suitable for Armstrong/POP/GB

ceiling with MS Powder coated White Housing. Total system Lumen of LED should be

3600 or above in Cool day Light(5700K to 6500K), Power factor>0.95, CRI (Ra) >80, LED

Make- Cree, Nichia,Philips Lumiled, Osram, LED Lamp Efficacy>100 Lm/W. Complete

with all accessories as required with connections. (Bajaj Cat No BZRSQL 36L LED GX

PRO WH or equivalent in Wipro / Philips (LM 79 & LM 80 report from NABL Accredited

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

Supplying, installation, testing & ommissioning of recessed type 7W to 10W LED Round

Spotlight with pressure die-cast aluminium heat sink & glarefree opal Diffuser. Total

system Lumen of 7W to 10W LED should be 700 or above in Cool day Light(6000K to

6500K), Power factor>0.95, CRI>80, LED Make- Cree, Nichia,Philips Lumiled, Osram,

7 MR LED Efficacy>100 Lm/W as per Philips cat No 7W Sky COB Tilt LED Spotlight (NW). Nos. 4.00 1158.00 4632.00

Complete with all accessories as required with connections.

SUPPLY OF CEILING & EXHAUST FANS

Supplying, Installation of heavy duty of 900 RPM. having double ball bearing motor with

high air delivery Exhaust fan with louver and shutter of size 300mm sweep suitable for

8 MR single phase AC supply in the existing opening including making the hole to suit the size Nos 4.00 2663.00 10652.00

of the above fan, making good the damage, connection, testing, commissioning etc. as

V ERECTION OF FANS

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated,

ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.

blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding,

Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery

1 1.5 minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, Each 35.00 329.85 11544.65

remote or electronic regulator unit for speed control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation

resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply,

earthing etc. complete as required.

VI MISCELLANEOUS ITEMS

Providing, laying and fixing following dia RCC pipe NP2 class

(light duty) in ground complete with RCC collars, jointing with

cement mortar 1:2 (1 cement : 2 fine sand) including trenching

(75 cm deep) and refilling etc. as required.

VII SUB HEAD (VII) :- PANEL AND DISTRIBUTION BOARD

Supply, Installation, Testing & Commissioning of FLOOR PANEL, cubicle type, made out of min

2mm thick CRCA sheet (load bearing), totally enclosed, IP42, free standing, floor/Wall mounting, dust and

vermin proof, powder coated, indoor, compartmentalised, suitable for operation on 3 phase and neutral, 415

1 MR V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick

gland plate, hinged type door with neoprene / PU gasket, IS 8623 etc. The panel shall include supply &

installation of following switchgears, metering instruments and accessories as per specification.

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

125A FP 35kA MCCB with thermal magnetic release with adjustable OL, SC and EF

protection - 1 nos.

1 Set of 200 A TPN busbars of high conductivity electrolytic quality Aluminium alloy and

suitable size earthing conductor through out the panel for its earthing.

2A, C curve SP MCB - 3 nos.

RYB indication lamp, LED type - 3 nos.

1 No 3 phase Digital Multi function meter to read V, A, F, kW, kWh, Acc class 1.

125/5A 5VA class 1 resin cast CT - 1 set

63 A FP 10 kA MCB - 6 nos.

VIII SUB HEAD (VIII) :- CABLES AND CABLE TRAY

MR CABLES SUPPLY

Supply, Laying, Fixing, Testing and Commissioning of following sizes of XLPE insulated

1 1.0 PVC sheathed armoured aluminium conductor cable of 1.1 KV grade on surface/ in open

masonary duct/cable tray/ ground for connection as reqd

Supplying and making end termination with brass compression gland and aluminium lugs

13 9.1 for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable

of 1.1 KV grade as required.

Supply and installing following size of perforated hot dipped GI cable trays(galvanisation

thickness not less than 50 microns) with perforations not more that 17.5% in convenient

16 4.6 sections, jointed with connectors, suspended from the ceiling with GI suspenders / fixed to

walls with suitable GI clamps, including bolts and nuts, bends, reducers, Tees, cross

members etc as required.

16.1 4.6.2 150 mm width x 50 mm depth x 1.6 mm thickness m 50.00 696.67 34833.40

IX SUB HEAD (IX) :- UPS

Supply, installation, testing and commissioning and testing of 10KVA, 415V, 3ph input &

1 MR 3 ph output ON-LINE UPS system back up protection for 30 minutes and along with all

company's standard accessories as required.

Details of UPS :-

(IGBT based rectifier & inverter) True Online UPS Systems having 15 Minutes battery

Backup with each UPS System with MS Rack, Interlink Cables and DC cables with all

accessories. UPS shall be provided with SNMP protocol for BMS interface.

Details of SMF Batteries:-

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

Sealed Maintenance free (SMF) Batteries for 30 Mins. backup with open type MS Rack

for installation of batteries and their respective battery leads copper cables / Interlink

between batteries, copper cables between UPS & batteries, DC Isolator, with suitable size

of Rack for batteries (as per battery manufacturer's standard) and etc. as required. Make

:- Exide / Quanta/ Amaron.

Isolation ;- Inbuilt at the input side of UPS System.

Back-up time :- 15 min. with SMF Batteries upto 0.99 Load Power Factor

VAH required :- Suitable size VAH for 30 KVA

Display :- Should have LCD Display

Upgradeability :- Should be upgradable to work as parrallel redundent UPS in load sharing

15 Minutes on Full Load. ( calculation need to be provided ) as per OEM ( Battery

Configuration has to be mentioned ) with racks

Display : Should have LCD display with event logging facility.

Flexi DC Bus of 30 to 44 Nos of 12 V SMF batteries to be available.

Should be Parallable in the Eco Mode configuration

The Energy Efficenecy requirment of UPS system at 100 Load shall be vary from 91.9%

to 93.8% or more.

Input Frequecy Range: 40-70 Hz

Including 5 (3P+2N+2E) runs of suitable size copper cable from the circuit breaker in UPS

room to the UPS and from UPS to the UPS panel.

Total cost of 10 KVA UPS with batteries and other acessories SET 1.00 277490.00 277490.00

X SUB HEAD (X) -DATA SYSTEM

Supply and fixing of 25mm medium class PVC conduit along with accessories in

1 1.21.2 surface/recess including cutting the wall and making good the same in case of recessed m 40.00 141.09 5643.40

conduit as required.

Supply and fixing of 32mm medium class PVC conduit along with accessories in

2 1.21.3 surface/recess including cutting the wall and making good the same in case of recessed m 10.00 179.03 1790.32

conduit as required.

Supplying and fixing of GI box of following size modules, alongwith modular base & cover

plate for modular switches in recess etc as required.

Supply and drawing of UTP 4 pair Cat 6 LAN cable in the existing surface/recessed PVC

conduit as required.

Supply,installation,testring and commisioning of following modular switch/ socket on the

existing modular plate & switch box including connections but excluding modular plate etc

Digitally signed by AKSHIT

Sl.No. DSR 2023 Description Unit Quantity Correction Amount

XI SUB HEAD (XI) -TELEPHONE SYSTEM

Supplying and drawing 2 pair, 0.5 sq mm FR PVC insulated copper conductor, un

armoured telephone cable in the existing surface/recessed steel/ PVC conduit.

Supply and fixing of 25mm medium class PVC conduit along with accessories in

2 1.21.2 surface/recess including cutting the wall and making good the same in case of recessed m 50.00 141.09 7054.25

conduit as required.

Supply and fixing of 32mm medium class PVC conduit along with accessories in

3 1.21.3 surface/recess including cutting the wall and making good the same in case of recessed m 10.00 179.03 1790.32

conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc as required.

1.24.6 Telephone socket No 2.00 144.00 288.01

Supplying and fixing of GI box of following size modules, alongwith modular base & cover

plate for modular switches in recess etc as required.

XII SUB HEAD (XII) -TV SYSTEM

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

1 1.2 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the mtrs 50.00 45.73 2286.55

existing surface/ recessed steel/ PVC conduit as required

Supply and fixing of 25mm medium class PVC conduit along with accessories in

2 1.21.2 surface/recess including cutting the wall and making good the same in case of recessed m 30.00 141.09 4232.55

conduit as required.

Supply and fixing of 32mm medium class PVC conduit along with accessories in

3 1.21.3 surface/recess including cutting the wall and making good the same in case of recessed m 179.03

conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc as required.

a 1.24.7 TV antenna socket outlet No 1.00 144.00 144.00

Supplying and fixing following size/ modules,GI box along with modular base, cover plate

for modular switches in recess etc as required.

DigitallyPage: 10/10

signed by AKSHIT