Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹39.1 L
EMD Value
₹78,101
Closing Date
12 Oct 2026, 5:00 pmDue today
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
VIKAS KUMAR
SASARAM MUNICIPAL COMMISSIONER
G.T. ROAD SASARAM
VIKAS KUMAR
SASARAM MUNICIPAL COMMISSIONER
Estimate for Mastic Asphalt Road (Bitumen) FromBasti More Dhalan Yo Gurudwara More (Jani Bazar ), in ward n0- 27 and 30& 31 , Under Nagar Nigam Sasaram . District.-Rohtas
141174
NNSSMNIT20/2026-27_GR_07
Open Tender
CIVIL
Rohtas
• PAN NUMBER
• GST REGISTRATION NUMBER
• FIRM REGISTRATION CERTIFICATE
• AFFIDAVIT
• CHARACTOR CERTIFICATE
• TOOL AND PLANTS
• EXISTING CERTIFICATE
• OTHERS AS PER NIT
CIVIL
PERCENTAGE
L1
1
8 documents required · 8 mandatory
₹5,000
Processing Fee: 1180
₹78,101
6 Oct 2026
6 Oct 2026
14 Oct 2026
7 Oct 2026
12 Oct 2026
7 Oct 2026
BILL OF QUANTITY
Name of Work-Estimate for Mastic Asphalt Road (Bitumen) FromBasti More Dhalan Yo Gurudwara More (Jani Bazar ), in ward n0- 27 and 30& 31 , Under Nagar Nigam Sasaram . District.-Rohtas
Item No. SOR Item of Work Quantity Unit 4.26 Amount
1 RCD 5.01(A) Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. 1330.560 sqm 46.90 62403.26
2 RCD 5.04(A) Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @4 percent by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 505 complete in all respects. 146.370 CUM 10242.80 1499238.64
3 RCD 5.02 Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 1330.560 sqm 14.10 18760.90
4 RCD 5.11 Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10sqm and at an approximate spacing of 10cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000c, protruding 1mm to 4mm over mastic surface, all complete as per clause 516. 1330.560 sqm 803.10 1068572.74
5 RCD 8.13 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. 67.200 sqm 684.70 46011.84
6 Carriage cost of materials:
(a) Coarse Aggregate 251.860 CUM 2043.39 514648.21
(b) Emulsion 1.20 MT 2228.46 2674.15
Total Rs. 3259931.93
7 Add Labour Cess @ 1% 32599.32
8 Add seigniorage Fee 251.860 CUM 59.540 14995.74
Total Rs. 3307526.99
Total(A) Rs. 3902881.85
9 Add cost of Information Board
bcd/8.13.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 0.450 SQM 3605.20 1622.34
bcd/13.106 Lettering with black Japan paint of approved brand and manufacture 150.000 1 letter of 1cm hight 2.70 405.00
Add GST ( increase 12% to 18% ) as Factor 5.36% . 108.67
Total(B) Rs. 2136.01
Total (A+B) Rs. 3905017.86
Grand Total Rs. 3905018.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT_20_Nali_Gali_Notice_0001.pdf
NIT • 2.04 MB
NIT_20_2026-27_GR_07.xlsx
NIT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .