REPAIR TO CUSHION SOFA AND CHARPOY AT GE SATWARI

Amount

Note:- Removal of following existing unserviceable steel/wooden components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,welding, glueing, providing hinges, applying putty to level the surface, placing every part in-tact and painting the disturbed portion & painting steel surface with two coats of synthetic enamel paint of existing shade with spray gun & apply red oxide primer where ever required after properly smoothening the surface with sand paper. All kind of work will be executed where the furniture exist in different User Units of GE Satwari including BSO's Furniture Yard, and office hours only as directed by Engineer-in-Charge.

Charpoy GI Pipe FD-220:- Removing of nylon niwar and reweaving of charpoy GI pipe after tightening of frame,with new nylon niwar of 50/55mm wide of 1st quality white colour, weight of niwar shall not be less than 1.50 kgs per charpoy, closely woven having minimum 34 bands on long rails and 14 bands on short rails,the ends of nylon niwar shall be stitched with nylon niwar by giving one fold with pipes.

Charpoy GI Pipe FD-220 Taking out existing broken plywood from the charpoy GI pipe by loosening the nut bolts, tighten the each part of charpoy. Supply and fixing 12mm thick BWR grade plywood and 02 Nos flat Iron of size 40mm x 6mm duly painted in black colour of length equal to width of plywood/GI charpoy of appropriate size (As per Drg) to GI pipe frame with new GI Nut, bolts 6mm dia 62 to 65mm long.

Removing old unserviceable three-way elbow from the GI pipe and S&F new three-way elbow 32 mm dia ISI marked, complete all as specified/shown on drg and directed by Engr-in-Charge.

Removing old unserviceable GI check nuts from the GI charpoy frame & S&F new GI check nuts 32mm bore/dia & 10 mm wide as specified/shown on drawing and as directed.

Removing old broken and long rail from charpoy and S&F new long rails of GI pipe ISI marked, 32mm dia medium grade duly treaded up to 22 mm on both ends to be fitted to the frame complete all as specified & shown on drg or as directed by Engr-in-charge.

Removing old broken ends short rails from charpoy and replacing with new short rails of GI pipe made out of long rails retrived vide serila items 03.04 here-in-before duly threaded at both ends up to 22 mm long at both ends to be fitted to the frame completet all as shown on drg or as ditected by Engr-in-charge.

Removing old broken ends and legs from charpoy GI and replacing with new legs of GI pipe made out of short rails retrived vide serial item 03.05 here-in-before, duly threaded at one end to be fitted to the frame. The lower ends of the leg shall be provided 3mm thick MS plate of 40mm dia shall be provided duly continous welding with and including provision of FMN set as directed by Engineer-in-charge irrespective of what is shown on drg. Rest all as shown on drg and as directed.

Conversion of charpoy GI pipe comprising of following FD-220:- Taking out existing UNSV plastic newar from the charpoy GI pipe. Tighten the each part of charpoy, Supply and fixing of 02 Nos flat Iron of size 40mm x 6mm duly painted in black colour of length equal to width of plywood/GI charpoy and fix it tightly to GI Charpoy with nut bolt including necessary drilling into GI Pipe. Drilling holes 02 Nos in each long rails,02 nos in each short rails & 01 nos on both flat iron at centre. Supply and fixing 12mm thick BWR grade plywood of size 1980 x 900mm fixed to GI pipe frame with GI Nut, bolts 6mm dia 60 to 65mm long.

Sofa Set 5 seater ( 2 Single Seater and one 3 Seater) FD-281&1113:- S&F new legs front and rear of teak wood of size 70mmx35mm in section made to shape as shown on drg.

S&F new arm of teak wood of size 35mm x70 mm in section Made to shape as shown on drg.

S&F Front rails of teak wood of size 35x100mm in section made to shape as shown on drg.

S&F Side rails of teak wood of size 35x100mm in section made to shape as shown on drg.

S&F Back rails of teak wood of size 35x70mm in section made to shape as shown on drg.

S&F new wooden batten of teak wood of size 50mmx20mm shall be fixed as shown on drg.

S&F new teak wood bearer of size 40mmx40mm as shown on drg.

S&F Hard PVC shoes as per sample.

Sofa Set 4 seater( 4 Single Seat) FD-281 & 1113:- S&F new legs front and rear of teak wood of size 70x35m in section made to shape as shown on drg.

S&F new arm of teak wood of size 35mm x70 mm in section Made to shape as shown on drg.

S&F new batten of teak wood of size 50 mmx20mm shall be fixed as shown on drg.

S&F new teak wooden bearer of size 40mmx40mm as shown on drg.

S&F Side rails of teak wood of size 35x100mm in section made to shape as shown on drg.

S&F Back rails of teak wood of size 35x70mm in section made to shape as shown on drg.

S&F Front rails of teak wood of size 35x100mm in section made to shape as shown on drg.

S&F Hard PVC shoes as per sample.

Taking out old pressed /torn old cushions and Supply 32 density thick foam cushion of size 21''x22”x4” duly covered with the Tapestry cloth as approved by GE.Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting. Tapesrty cloth for cover should be of minimum Rs 500/- per meter all as approved by GE.

Taking out old torn faded cushion cover from old cushions and S&F new cushion cover to the existing cushion cover. Cushion cover shall be provided with best quality zip stitched on one edge of cushion cover with standard fitting. Tapesrtry cloth for cover should be of minimum Rs 500/- per meter all as approved by GE.

M/S INDAN FURNITURE MART

KHAJURIA BUILDERS

PACHNANDA BUILDERS

KAY KAY ENGINEERS & CONTRACTORS