REPAIR/PAINTING/RECANNING OF STEEL FURNITURE AT AFS JAMMU UNDER GE(AF)JAMMU

Amount

Taking down of unserviceable seats/back of chair CB tubular with arms Godrej Pattern and supply and fixing of seat/back all as shown and specified on drawings:-FD-259,19

Taking down of unserviceable seats/back of chair CB tubular without arms Godrej Pattern and supply and fixing of seat/back all as shown and specified on drawings:-FD-259,19

Material and labour for painting of steel articles after removing of old painted surfaces and making smooth surfaces by spray painting inside with synthetic enamel paint OG/Gray/White till grossy complete all as specified and directed by Engr -ion-Charge.

Almirah Large steel with shelves :-FD-67,351,1031

Almirah medium steel with shelves :-FD-1032

Table Office Officer steel :-FD-84,1003

Table Officer clk Steel :-FD-1004

Book Case steel:-FD-90,1028

Book self open large Steel :-FD-69

Almirah Glazed steel :-FD-104

Chair CB Tubular with arms :-FD-75

Chair CB without arms.:-FD-75

Rack side 3/4 spaces :-FD-97,1023

Necessary welding of steel furniture when is required.

Replacement of unserviceable locks with new locks of steel Almirah Large/Medium when required. FD-1031/1032 Make : Godrej / Harrison /Link

Replacement of unserviceable assembly of steel Almirah Med/Large when required. FD-1031 &1032 Make : ISI Marked

Replacement of unserviceable Handles of Almirah steel Med/Large when required. FD-1031&1032 Make : ISI Marked

Locker Bed Side Steel: :-All as shown and specified on drawings:-FD-257

Repair to locker including denting , bending,replacement of following new parts and repainting of locker with synthetic enameled paint of OG/Gray(as per existing colour) after preparation of surfaces by clearning /smoothening with sand paper and applying putty/primer where necessary . All as specified and shown on drg and directed by Engineer-in- Charge. New parts as mentioned below shall be measured and paid separately as supply only.

Supply of hasp and staple 75mm long as per drawing

Supply of MS steel CP coated handles 100mm long as per drawing

Supply of CP steel conduit 19/20mm dia hanging rod 16 gauge as per drg.

Repair of chair revolving /Chair cushioned seat and back of different makes :-

Replacement of seat and back of chair revolving/ Chair cushioned seat or back of as and when required as directed Engr-in-Charge.Trade Pattern

Replacement unserviceable broken base with wheels of chairs revolving with new base of chair revolving of superior quality approved by Engr-in-Charge when required.

Replacement of unserviceable hydraulic piston assembly with new hydraulic piston assembly of chairs revolving ISI Marked duly approved by GE,as required and as directed Engr-in-Charge

(a) Taking out existing unserviceable plastic Newar from the GI Pipe charpoy. (b) Supply & Fixing of 02 Nos of flat iron size 40mm x 6mm thick of length equal to width of plywood/GI Charpoy bending the flat iron to the shape required to fix it tightly to GI pipe with nut, bolt and washers of size 62-65mm and dia 6mm including necessary drilling into GI pipe and welding the top portion of flat iron all as directed by Engr-in-Charge. (c) Drilling holes 2 Nos each in long rails and 02 Nos of each short rails and 02 Nos at centre of plywood. (d) Supply & fixing 12mm thick plywood commercial type of size 1980 x 900mm fixed to GI pipe frame with GI nut bolts 6mm dia 62 to 65mm long . Make of plywood : Greenply/Century/Bhutan board /Durian (e) Material & labour for two coats of black paint over one coat of primer on flat iron 40mm x 6mm including preparation of surface all as shown and specified on drawings:-FD-220

Taking out Existing broken plywood from the charpoy GI pipe by loosening the nut bolts with washers, tighten each part of charpoy, supply and fixing 12mm thick MR grade plywood commercial of size 1980 x 900mm fixed to GI pipe frame with new GI Nut, bolts 6mm dia 62mm to 65mm long -FD-220 Make of plywood : Greenply/Century/kitply

Taking down unserviceable broken long rails of charpoys GI Pipe and supply & fixing rail of Charpoy made out of GI Pipe 32mm bore medium grade ISI marked and approved by Engr-in-Charge including threading complete all as specified and shown on drawing Make of pipe all as shown and specified on drawings:-FD-220 Make of Gi pipe: Jindal/Tata/BST.

Taking down unserviceable broken short rails of charpoys GI pipe and fixing the short rail (Short rail shall be made from long rail obtained from serial item 11.00 here-in-before) including threading complete all as shown and specified on drawings:-FD-220

Taking down unserviceable legs of Charpoy GI Pipe and fixing legs in charpoy (Legs shall be made from Short rail obtained from serial item 12.00 here-in-before) including threading. The bottom of legs shall be provided with and including cap (Plug) complete all as shown and specified on drawings:-FD-220

Taking out unserviceable elbow 3 way 32mm bore from charpoy GI pipe and supply and fixng new elbow 3 way 32mm bore ISI marked as approved by Engineer-in-Charge all as shown and specified on drawings:-FD-220

Taking out unserviceable broken check nuts from charpoy GI pipe and supply and fixing new check nut suitable for charpoy GI Pipe of 32mm bore as approved by Engineer-in-Charge all as shown and specified on drawings:-FD-220

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site/furniture will be available in piecemeal wise and as directed by Enginer-in-Charge in the Air Force station/Kaluchak area

KHAJURIA BUILDERS

PACHNANDA BUILDERS

M/s Jainco Steel Industries

L.BHIMSEN