CE/D/MDU/EE/S-004/2020-21

Amount

Earth work excavation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Earthwork excavation in soft disintegrated rock laterite soft rock or kankar not requring blasting, etc, complete

Earthwork excavation in medium rock and dense medium rock requiring blasting.

Earthwork excavation in hard rock measured in solid including blasting and stacking

Supplying and filling of river sand in foundation and basement with well watering and consolidation as per specn. incliding cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 20mm HBS machine crushed metal for foundation including cost of all labour, materials, lead, lift, curing, etc., complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC 1:1.5:3 (RCC M 20) using 12 to 20mm (machine crushed) metal for coloumn foundation concrete without formwork including cost of all materials, lead, litf, etc., complete.

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for Column Footing concrete with centering shuttering form work including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for raft foundation without formwork including cost of all materials, labour lead, litf, etc., complete.

Raft Concrete RCC 1:1.5:3 using 20mm HBG metal for foundation with out form work including cost of all materials, form work including cost of all materials, labour, lead, lift, etc. complete.(But excluding cost of steel reinforcement)

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for Column concrete up to basement level with centering shuttering form work including cost of all material, labour lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for Grade beam with centering shuttering including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for Column concrete above Basement up to Ground Floor Roof level with centering shuttering form work including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for Column concrete First Floor Head Room with centering shuttering form work including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

Brickwork in CM 1:5 mix using II class champer bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete - for - Basement

Brickwork in CM 1:5 mix using II class champer bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete - for - Super Structure

Brickwork in CM 1:5 mix using II class champer bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete - for - First Floor Head Room

Brickwork in CM 1:3 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, superstructure including cost of labour and all othe materials, curing, lead, lift, etc., complete - For - Basement

Brickwork in CM 1:3 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, superstructure including cost of labour and all othe materials, curing, lead, lift, etc., complete - For - Super Structure

RCC. 1:1.5:3 mix using 12 mm to 20mm HBS metal(machine crushed) for plinth beam with formwork including cost of all labour, materials, lead, lift, etc, complete. But excliding cost fo stee reinforcement (by using mixer machine).

Flooring with PCC 1:4:8 mix using 40mm HBS metal for flooring 150mm thick (machine crushed metal) including cost of all materials labour lead, lift, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for Control Room flooring concrete 100 mm thick with formwork including cost of all materials, labour lead, litf, etc, complete. but excluding cost of steel reinforcement

Wearing coat of PCC 1:2:4 using 12mm thick below chips 20mm thick and top plastering in CM 1:3,12mm thick using 3.80 Kg red oxide for 10 SQM on top, including cost of all materials lead, lift, etc., complete.

RCC 1:1.5:3 mix using 12 to 20mm HBS metal (machine crushed) for contineous lintel, tier slab and bed block, cover slab for staircase slab, water tank slab with formwork including cost of all materials, lead, lift, etc., complete.(by using mixer machine).

RCC 1:1.5:3 mix using 12 to 20mm HBS metal (machine crushed) for sun shade 60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, labour, lead, lift, etc., complete. (by using mixer machine).

RCC 1:1.5:3 using 12-20mm HBS metal (machine crushed) metal for Roof beam, bed block with centering shuttering including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC 1:1.5:3 using 12-20mm HBS metal (machine crushed) metal for First Floor Head Room Roof beam, bed block with centering shuttering including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC1:1 1/2:3 using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete of 130 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.

RCC1:1 1/2:3 using 12mm to 20 mm HBS metal (machine crushed) for First Floor Head Room roof slab concrete of 130 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, litf, etc, complete.

Plastering with CM. 1:3 mix 12mm thick for fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

White washing two coats with White cement approved quality over a primary coat for ceiling, exposed surfaces of wall, beam, slab, sunshade, lintel, etc, including cost of all materials, lead, lift, etc, complete.

Colour washing two coats with Exterior Plastic Emulsion paint over one coat of Plastic Emulsion primer for outside wall including cost of all materials, labour, lead, lift, etc., complete.

Colour washing two coats with Exterior Plastic Emulsion paint over one coat of Plastic Emulsion primer for inside wall including neceessary plaster of parrys two coats cost of all materials, labour, lead, lift, etc., complete.

M&F in position of anodised aluminiuum glazed door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with everite / pioneer, floor gear rubber beedings, hinges, handle& 5mm thick CGL make cooling glass including cost of materials,labour, lead, lift, etc., complete door size 1.20 x 2.20 m single leaf

Supplying fabricating and fixing in position of anodized aluminum glazed sliding window including with ventilator head of size 1.20 x 1.50m in accordance with ISI 1868, 1962 for bottom gutter arrangements so as to drain the water entry andextruded aluminum section of bottom track of size 62 x37mm with gutter arrangements at 1.218 kg/m side and top track of size 62 x31.5mm at 0.778kg/m for shutter plain top and bottom section of size 40 x 18mm at 0.38kg/m plain side vertical section of size 40 x 18mm at 0.493kg/m inter loading vertical section of size 40 x 18mm at 0.63kg/m ventilator box frame 63 x 37 at 0.850kg/m switch lock special rubber L angle aluminum clip 17.15 x 17.27 1.5mm thick 0.128kg/m screws and fixing 4mm thick frosted glass etc, complete and including cost of all materials, lead, lifts, labor for fabricating and fixing in position including drilling holes in R.C.C. work and brick work etc, with power drill to the required extent and made to the original condition after fixing etc.

M&F in position of anodised aluminium partially glazed door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges,handle, etc.,& bottom with 12mm tk one side laminated MDF duratuff exterior board and top with 5mm thick CGL cooling glass,etc., complete. Single leaf door of size 1.20 x 2.20m

M&F in position of anodised aluminium panelled door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic door closer etc, and with 12mm tk. One side laminated board including cost of all materials, lead, lift, etc, complete Single leaf door 1.00 x 2.20 m

Supply and fixing of Alu.Ventilator of 0.60 x 0.45m fully glazed lover type as per standard specification with approved section for frame and glass 4mm thick including providing 12mm dia bar including cost of all materials lead lifts labour etc complete.

M&F in position of PVC door shutter made of Single Pannel laminated Plastic section and PVC extraced shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminiam towel bolt hinges etc., complete.

Supplying and fixing of two side polished 20-30mm tk.cuddapah slab for cupboard, kitchen platform etc., including cost of all materials, labour, lead, lift, etc., complete

Dadooing with glazed tiles of best approved quality of make johnson, neycer etc, over CM 1:3, 12mm thick including cost of all materials, labour, lead, lift, etc., complete.

Flooring with approved spartex ceramic non slippery type tiles over cement mortar 1:3, 12mm thick including pointing with white cement finishing the joints, flush pointing the surface etc., complete.

Providing weathering course with good quality of readymade weather proof / Leak proof tiles laying over cm 1:3, mixed with crude oil at 10% by weight of cement and pointed with the same oiled mortor including cost of, cement all materials, curing, labour, lead and lift etc., and including cost of material and labour for applying water proof component over the terrace etc., complete.

Supplying and fixing in position of GI angle 50x50x5mm of required length for fixing the cable duct, as per the direction of site Engineer including cost of all materials, lead, lifts, and cutting the GI angle required length and labour for fixing etc, complete.

Supplying and fixing in position of MS channal 110 x 50mm required length for fixing the cable duct side wall, as per the direction of site Engineer including cost of all materials, lead, lifts, and cutting the MS channal required length and labour for fixing etc, complete.

RCC 1:1.5:3 mix concrete using 12 to 20mm mechine crushed HBS metals for septic tank cover slab including cost of all materials lead lifts labours with form work etc complete

Supplying and laying PVC pipe 110 mm outer dia 6kg / cm2 ISI make for laying the Sewer line including cost of pvc pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete

Supplying and fixing of 110mm dia PVC Slated pipe for dispersion trench with covering with roof pantiles for covering the sides partly as per drawing including cost of all materials lead, lift etc. Complete.

Supplying and filling 40mm HBS metal for dispersion trench as per standard specification including cost of all materials, lead lift etc.complete.

Supplying and fixing 110mm dia PVC Bend including cost of materials, labour lead lift, etc. Complete

Supplying and fixing 110mm dia Pvc TEE including cost of materials, labour lead lift , etc. Complete

Supplying and fixing of 100mm dia PVC pipe , and cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M.1:5mix plastering 12mm thick including cost of all materials, labour lead, lift etc Complete.

Providing Godrej 6 lever lock including cost of lock, lead, lift, labour, etc, complete.

Providing antitermite treatment in 4 stages i)immediately after ewe and before laying of foundation conc. ii) after refilling for sides of foundation iii) before laying of flooring conc. & outside of basement upto1 m alround the building using termit 250ml for 5 liters of water

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Supplying and erection of 1 1/4" (32mm) outer dia 25mm inner dia PVC Pipe 10 kg / sq.cm Suction and delivery including cost of pipe confirming for IS 4985/1968 and 4984/1978 including bend labour for cutting threading fixing and tightening necessary excavation etc., complete.

Supplying and fixing in position of 25mm dia pvc pipe of 10 kg/sq.cm pressure from the approved manufacturer appolo, chemplast, avanplast, valamarthi, usha, vimal etc., confirming to IS 4985 of 1968, 4984 of 1970 including cost of all special fixtures labour lead, lift, etc., complete.

Supplying and fixing in position of 20mm dia pvc pipe of 10 kg/sq.cm pressure from the approved manufacturer appolo, chemplast, avanplast, valamarthi, usha, vimal etc., confirming to IS 4985 of 1968, 4984 of 1970 including cost of all special fixtures labour lead, lift, etc., complete.

Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of labour for fixing etc., complete

Supplying and fixing of 15mm high quality brass Chromium plated screw down bib cock (Heavy Type) such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing inposition of GM gate valve (Heavy Duty) of best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift, labour etc., complete - for - 25 mm dia GM Gate valve / Ball valve

Supplying and fixing inposition of GM gate valve (Heavy Duty) of best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift, labour etc., complete - for - 20 mm dia GM Gate valve / Ball valve

Supplying and fixing inposition of GM gate valve (Heavy Duty) of best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift, labour etc., complete - for - 32mm dia GM Gate valve / Ball valve

Supplying and filling of Red gravel in the basement filling stacking to the department gauge, labour for filling, watering and consalidation, including cost of all materials, lead, lifts, labour, etc, complete.

Refilling with excavated soil other than sand in foundation and sides of masonry, consolidation as per std. specn. With water including all labour, lead, lifts. etc, complete.

Removing the excess earth to the nearby bund or low laying area as instructed by field engineer including all labour lead, lift, etc., complete.

Supply and fixing 1 no 4 way S.P. and natural distribution board with insulator and 1 No. MCB of 6 amps each of standard company as approved by the engineer including cost of all materials, Labour lead, lift, etc., complete.

Wiring with 2x1.50 sq.mm PVC unsheathed copper multistand cable of 1100 V grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with contineous earthwire connection of 14 SWG TC wire for light and Fan points (SD 23)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.(SD38)

Supply and fixing of 40 W LED industrialtype fitting 'INDURA' (Philips /Crompton) complete with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with LED lamps

Supply and fixing of 20 W LED lamp fitting 'INDURA' complete with supension pipe fom the ceiling or wall with PVC unsheathed copper leads from the terminals to the fitting with LED lamp with approved make ( Philips / crompton)

Wiring with 2x4 sq.mm Pvc unsheathed copper multistand cable of 1100 V grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with 150mm x 100mm x 75mm T.W switch box in flush with wall covered with 3mm tk. Hylum sheet for 15 amps 3pin flush type non interlocking C.S plug including pin top with painting of suitable colour with contineous earthwire connection of 14 SWG T.C. wire for plug point.

Supplying and fixing of 23 cm angular holder with EI fancy shade glass with 8 W LED bulb. (sd 81)

Supplying and fixing of 1400mm (56") sweep AC ceiling fan with regulator with Suitable down rod on the exisitng clamps of crompton / rally / Orient including cost of all materials lead, lift etc., complete. Sd(114)

Supplying and fixing of water tight Bulk head fitting with guard (philips, bajaj, k-lite, cromption greaves) suitable for incondescent lamp with guard and 8W LED bulb.

Supplying and fixing of 375mm (15') sweep heavy duty AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall

Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Supplying and fixing of residual currenet device of current rating 25 amps and sensitively of 30 m.amps of ISI make as approved by engineer at site including cost of all materials, labour, lead, lift, etc., complete

Earthing as per standard specification complete with necessary masonry work. Sd(221)

M&F in position of steel door of size 0.92 x 1.96 m with framed in MS angle 40x40x6mm, 25x25x6mm angle for door frame with 2Nos of MS flat 25x6mm for cross braceing for each leaf with MS plain sheet 18 gauge duly fixed to leaf including cost of all materials, labour, lead, lifts, lock arrangements etc complete (single leaf)

Providing and fixing sanitary fitting consisting of Neycer / parryware of oriya patten Water Closet 45cm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc,complete.

Supplying and fixing of best quality of mirror of size 300 x450mm mirror with soap tray, towel stand, screw and fixing near the wase basin, teak wood round block, including cost of all material, labour, lead, lift, etc, complete.

Supplying and fixing 100x50mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Supplying and fixing of wash basin of size 500x400 mm of approved quality neycer / parrys ISI including cost of wash basin with pedastal cock fixing using rag bolt and nut 15mm dia pvc connecting hose and outlet using 50mm dia pvc waste water pipe for outlet CP angle valve with all accessories including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of approved quality of Brass Chromium plated towel rod of size 90cm and fixing the same over the teak wood round block and soap tray (pvc) in bath room including cost of all materials, lead, lift, etc., complete.

Engraving the month and year of construction in the plinth beam projected border as per drawing and as per the instructions of site engineer (granite stone of size 300x200 mm.)

Supplying and fixing CI.man hole cover of size for inlet and outlet manhole and building outside man hole cover for heavy duty including cost of all materials lead, lifts, labour etc., complete - for - 0.45 x0.45 m CI manhole cover

Supplying and fixing CI.man hole cover of size for inlet and outlet manhole and building outside man hole cover for heavy duty including cost of all materials lead, lifts, labour etc., complete - for - 0.60 x 0.60 m CI manhole cover

Providing inspection chamber for sufficient intervels throughout the line 0.45x0.45m. Size to a depth as below with proper gradient of the sewerline and BW. in CM. 1:5 with CI. cover (Heavy duty ) at top and bottom foundation PCC 1:3:6 using 40mm metal plastering with CM.1:3 12mm thick and all lead, lift etc.complete. 0.45x0.45m size to a depth of 0.45m

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Providing PVC down fall pipe using 110mm dia 4 Kg / Sqcm, PVC pipe and pvc clamp line supreme etc., including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including pvc accessories and washers.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm width for plinth beam in CM 1:3 20mm thick including cost of all materials, labour, lead, lift, transport etc., complete.

Colour washing two coats with cement paint over one coat of white cement primer for Retaining wall including cost of all materials, labour, lead, lift, etc., complete.

Supplying and filling well gravel in the Road and Yard filling stacking to the department gauge, labour for filling, watering and consalidation, including cost of all materials, lead, lifts, labour, etc, complete.

PCC 1:2:4 using 12-20mm HBS metal for fenceing retaining wall foundation concrete including cost all materials lead, lifts, labour curing etc complete with out form work

PCC 1:2:4 using 12-20mm HBS metal for Yard Retaining wall concrete including cost all materials lead, lifts, labour curing etc complete with Two side form work

Supplying and filling with 25mm HBG metal in the SS yard, stacking to the department gauge, labour for filling, including cost of all materials, lead, lifts, labour, etc, complete.

Providing laying WBM 150mm compacted thickness (4 layers) with grade metal using 1 Cum of 63-45mm IRC metal with 0.24 cum of gravel / Stone dust mix for blindge for 10 Sqm including cost and conveyance of all materials and stacking them at site to dept. gauge for pre measurment, labour for spreading metal and gravel, hand packing to camber watering with all leads and compaction with 80-100 KN power rollar including hire charges for power roller etc, complete.

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.

RCC 1:1.5:3 using 12-20mm HBS machine crushed metal for Gate Pillar foundation including cost of all materials, labour lead, lift, etc, complete with formwork (but excluding cost of steel reinforcement) (Above GL)

Supplying and fixing of 65 x 65 x 6mm GI angle for fence post including charges for cutting the angle required length and providing holes for tensioning the chai link fence, fixing the angle over the retaining wall with proper alginment and all cost of materials labour lead lifts and etc complete.

Supplying and fixing transporting of 50 Sqmm GI Chain link fence of 10 gauge with standard width 1.85 m height including straightening and tensioning the Corner post with bolt and nuts including cost of all materials lead lifts etc complete.

Manufacturing and fixing of Name Board of size 2.00x1.20m using 35x35x5mm MS angle as outer frame 35x5mm MS flate as stiffness, 2Nos vertical and one number horizontal 100x50mm Ms channalas support for 3.60m height for fixing of board with proper anchoring and using 18 SWG MS sheet for name board and painting the name board with one coat of red oxide primer and two coatss of approved enamal paint including cost of all materials labour for painting emblem lettering and all lead lifts etc complete

Supplying and fixing in position of grill gate including cost of all materials lead, lift, etc. asper type design drawing with proper locking arrangements as directed by the engineer at site including cost of painting a) main gate of size 6.00 x 1.50m (b) wicket gate 0.90 x 1.20 m

Brick work in CM 1 :6 using 11 class brick of size 9" x 4 3/8 "x 2 3/4 " for Pump Room Super structure including cost of All materials , labours, lead, lift, etc complete.

PCC Wall 1:3:6 using 20mm HBG metal for Cable duct with form work including cost of all materials, form work including cost of all materials, labour, lead, lift, etc. complete.

PCC 1:2:4 using 20mm HBG metal for Cable duc, Addn. Breaker Plinth with form work including cost of all materials, labour, lead, lift, etc. complete.

RCC 1:1.5:3 using 12 to 20 mm HBG machine crushed metal for Fire Protection Wall, Transformer Plinth, Precast slab , including cost of cement and all lead, lift, curing, etc., complete but excluding cost of steel reinforcement.

Labour charges for transporting from casting yard to curing tank,curing tank to cable duct , aligning and laying of RCC pre cast slab as directed by the site engineer including all labour lead lifts etc complete

Colour washing Two coats inside walls using interior emulasion paint over a primer one coat including cost of all materials, labour, lead, lift, etc., complete

Fabrication and Labour charges for fixing of GI angles of 50x50x6mm sizes vertically @ 75cm c/c to the required length for supporting the cable in the cable duct in correct position including labour ,cutting etc., complete as per the drawing and std.specification.

RCC 1:1.5:3 using 12 to 20 mm HBG machine crushed metal for Transformer Plinth including cost of cement and all lead, lift, curing, etc., complete but excluding cost of steel reinforcement.

Drilling of 150 mm dia borewell from GL in all classification of soils including hard rocks using Power RIG/Hamer RIG, charges for transporting the power Rig to site , operation charges all lead, lifts , labour, etc, complete.

Supplying and fixing 160 mm dia Pvc casing pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of Pvc casing pipe, labour, lead, lifts, etc, complete..

Labour charges for inserting 160 mm dia PVC casing pipe assembly in the drilled bore holes including jointing the PVC pipe with the PVC Coupler with cement paste etc., complete.

Supplying and erection of three phase 3HP Submersible multi-stage (30-40 stage) electrical motor and pump of approved ISI brand with non-return valve, adoptor, nylon rope and all related accessories as per IsI in all respect including necessary switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make panel board with Amp. & Volt meters with guard and providing earthing to main with no. 8 tinned copper rod and 6' long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification labour charge for erection of submersible pump and motor including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Provision of conducting Geological survey for bore well by the Government agencies. including transport,labour etc complete

Supplying and fixing of 32 mm dia outer HDPE Hose fine tee, flow tee of ISI make with all connecting sepcieals for air pipe including cost of all materials, labour, lead, lifts, etc, complete.

Supplying & fixing of 40mm dia. U- PVC Heavy duty pipe with RED COLOUR MARK of equivalent ISI make for suction inside the borewell with supporting clamp including cost of all materials, labour, lead & lift etc., complete as driected by the department engineer at site.

Supplying & wiring with 2x4 Sq.mm.flat type submersible cable of make FINOLEX, V-GUARD or other approved ISI make for connecting the submersible motor and to the panel board and clamping with the PVC pipe with suitable clamps inside the borwell including cost of all materials, labour, lead & lift etc., complete as directed by the department engineer at site.

Supply & erection of 63 A TPN Isolators in suitable steel DB & Wiring with cable of approved make for wiring the pump room motor connectionn including erection of pump & pipes into bore well and delivery to the wall of pump room including cost of all material labour lead lifts etc complete..

Supplying and fixing RCC Ring 60cms dia 5mm thick and 60cm height with top cover including cost of all materials lead, lift, labours, etc, complete

Providing 20mm GI piug with pin holes including cost of all materials lead lifts labour etc complete.

Supplying and Fixing of 90 LBS rail for transformer plinth with grip rod - one set including Including cost of rail, Labour for cutting, fixing in position as per specifiaction including cost of all materials, Lead, Lift, Labour, Cost of Binding wire, etc., Complete

Brick work in CM 1:5, using good quality Chamber bricks for brick wall of size 23 x 11 x 7 cm including cost of all materials, labour, lead, lift, curing and transporting etc., complete

Labour, machinery, Consumables for the Fabrication for steel structures 1 for Heavy section (14 kg/m and above)

Labour, machinery, Consumables for the Fabrication for steel structures 1 forLight section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel Structures 2 for Heavy section (14 kg/m and above)

Labour for the Erection of the Fabricated Steel Structures 2 for Light section (below 14 kg/m)

Labour, machinery, consumables for fabrication, erection of earrthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike). As directed by the field engineer.

Labour charges for providing earth spike with G.I pipe including fabrication of base frame,painting and fixing as per departmental specification,excluding cost of G.I pipes,M.S Flats,base angles., etc. 5

Labour for excavating and refilling of earth /trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field engineer for Normal clay / hard gravel soil

Labour for excavating and refilling of earth /trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field engineer forSemi density rock soil

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer. (Earth to be supplied by the contractor)

Supply and providing of 450-600 mm dia, 300 mm height, 36 mm thick cement collar with top cover for identification of earth electrode location as directed by the field engineer. 7

Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint of all Steel Sections as directed by the field engineer after proper surface preparation using appropriate machinery to remove rust/scales etc.

Labour, consumables for the Second Finish coat using Aluminium Paint of all steel sections as directed by the field Engineer.

Labour for erection of Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer for 33/22/11 KV Breaker

Labour for erection of Measurement transformers, reactor units, using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer for 33/22/11 KV

Labour for erection of 33/22/11 KV station transformers with/without crane and as directed by the field engineer.

Labour for erection of HG fuse complete set 33/22/11 KV

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer for 33 KV

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer for 22/11 KV

Labour for erection of LAS station/Distribution type single unit including monitors & accessories for 33/22/11 KV

Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer upto 33 KV Single Conductor Strung Bus/phase

Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer for 50 mm (1 length)

Labour for the Erection of Jumper/Droppers using a)Moose/Zebra/panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the Erection of Control Panels includings consumables as directed by the field engineer for Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/Relay Panels of Grid type (P&C)

Labour for the Erection of Control Panels includings consumables as directed by the field engineer for Double feeder Control/Relay Panels of Grid type (P&C)

Labour for Erection of Battery set including two coats of painting of Acid proof paint on wooden stand and neatly stacking the Battery cells and fixing of connecting plates for 110 V DC , 120AH

Labour,Consumables for the Initial filling and First Charging of the Battery to the required AH input and thereafter atleast 3 cycles of Charge / Discharge of the Battery set till the battery is charged to its full Capacity as directed by the field Engineer for 110 V, 300/120 AH

Labour for erection of cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer for Up to 8 Core

Labour charges for laying of control/ yardlight cable by digging cable trench of size 0.3mX0.6m filling with for a depth of 0.2m, covering with one layer of country bricks and refilling with excavated earth and including cost of sand and bricks,etc.

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer for 16/19 mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer for 22/25 mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer for 28/32 mm

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer for 35 mm

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer.(No.of core ends in unit of 1000).

Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs &2.5inch dia for 2mtrs)including single/double fitting fixing arrangements,1 inch dia B class pipe arms,yard light box fixing flat and one coat of redoxide and Two coat of Aluminium paint.

Supply and Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) G.I Sheet as per drawing , provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, VAT, frieght, etc and as directed by the fiels engineer on site requirements. (The box shall be vermin proof,shall be provided with sturdy hinges,with provision for cable entry and locking arangements).

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply,Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible Copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/MCBs including consumables, VAT, fright, etc., as directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements) 44

Fabrication, supply and fixing of AC junction box of size 535x310x127mm of 18 SWG M.S Sheet including HRC Fuse unit-18nos should be fitted with base, consumables, VAT, fright, etc., asTRANSCO standard and directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements) 45

Fabrication, supply and fixing of Station Transfomer Distribution box of size 900x650x250mm of 18 SWG M.S Sheet including Porcelin Fuse unit-(200A-3nos,100A-6nos), consumables, VAT, fright, etc., as TRANSCO standard directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements).

fabrication,supply&fixing of Earthpit detail board including the cost of 20SWG CR Sheet,10mm RTS Rod ,T &P etc.,complete.47

Supply and Labour charges for fixing of 20 SWG CR Sheet(size of board 8' x 4') in Equipment Details board/Fire Stand roof including the cost of CR Sheet ,Red oxide Paint etc.,complete.

Supply and laying,fixing in position of 10 kg/sqcm pressure 25mm dia PVC pipe (Make Appolo,Usha,Chemplast etc) including L bend,Tee,PVC Tape for Earth pit watering as directed by the field engineer on site requirements..

Suppiy and Fixing of 1 inch GM gate valve (ISI/best quality) including cost of all materials and labour etc.,Complete.

Supply and Erection of 1x72W or 2x36W, 240V LED street light Aluminum case fitting ISI- Make as per direction of site engineer.(inclusive of all taxes).

Supply & fixing of LC/Key board out of 75x 25 mm Alu. frame embedded with 12 mm pre-laminated wood particle board using screw on rear side, 2 Nos plain glass sliding shutter of 5 mm thick fixed with metal roller on Alu.channel with locking arrangements, glass piece handle shutters, wall clamp as directed by the field Engineer including cost of all materials & all consumables.

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field engineer.

Supply and fixing of Key chain,ring and identification key token for A.B.Switches as directed by the field engineer.

Supply and erection of Vinyl Sticker cutting/Printing on Vinyl Sticker/Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field engineer.

Supply & providing of Mechanical foam type fire extinguisher with all accessories at site conforming to IS with safety certificate from the competent authority.(Refill type).(Including transport) for 50 litre trolly mounted

Supply & providing of Mechanical foam type fire extinguisher with all accessories at site conforming to IS with safety certificate from the competent authority.(Refill type).(Including transport) for 9 litre portable

Supply & providing of DCP (Dry Chemical Powder) type fire extinguisher with all accessories conforming to IS 58 for - Supply & providing of Mechanical foam type fire extinguisher with all accessories at site conforming to IS with safety certificate from the competent authority.(Refill type).(Including transport) for 25 kg Trolly mounted

Supply & providing of DCP (Dry Chemical Powder) type fire extinguisher with all accessories conforming to IS 58 for - Supply & providing of Mechanical foam type fire extinguisher with all accessories at site conforming to IS with safety certificate from the competent authority.(Refill type).(Including transport) for 10 kg Portable

Supply & providing of DCP (Dry Chemical Powder) type fire extinguisher with all accessories conforming to IS 58 for - Supply & providing of Mechanical foam type fire extinguisher with all accessories at site conforming to IS with safety certificate from the competent authority.(Refill type).(Including transport) for 5/6 kg Portable

Supply and fabrication of sand drums,(size of 580mm dia & 420 mm height)with conical cover made of G.I sheet to be provided with handle including the cost of barrel,G.I sheet ,sand,paint and other consumables as directed by the field engineer.

Supply & providing of fire buckets 10Ltrs capacity

Supply and fabrication and erection of eye bolts/grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer for Grout Bolt

Supply and fabrication and erection of eye bolts/grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer for Eye Bolt

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Non-Fragile Materials - 33 /22/11KV Isolators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Non-Fragile Materials - Cables/Conductors including cutting and rewinding

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Non-Fragile Materials - Busbars

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Non-Fragile Materials - Clamps/Power connectors/tension fittings

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Non-Fragile Materials - Fire equipments/rubber mats/others

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Fragile Materials -33/22/11 KV Breaker

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Fragile Materials -33/22/11 KV CT/PT/LAS/DT/Others

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Fragile Materials -110 VDC Battery sets

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Fragile Materials -33/22/11 KV Insulators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Fragile Materials -AC/DC/C&R Panels of Non grid type, Single feeder Control/Relay Panels of Grid type

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Fragile Materials -Double Feeder Control ,Double feeder Relay Panel

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation of Fragile Materials -Battery Charger-Simple type

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - 4-Bolt Tension fitting

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - Switch End Clamp for Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - Switch End Clamp for Mink

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - Switch End Clamp for 50mm Bus

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - T clamp for Zebra to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - T Clamp for 50m Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - Free End Clamp 50mm

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - Reducer Clamp for 50mm Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - PG Clamp for Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification - POWER CONNECTORS - 50mm Corona Bell

Supply and erection of "B" class G.I.pipe for extension of tandem/down pipe for A.B.Switches and for any other work required as directed by the field engineer - STATION ACCESSORIES - 50 mm Dia

Supply and provision of 12/25x3mm flexible braided copper / copper flats as required and as directed by the field engineer.

Supply &Crimping of Lugs of Suitable sizes as required for PT/CT Jumbers, etc as directed by the field engineer.

Supply and provision of M8,M10,M12 and M16 (full /Half thread)G.I.bolt and nuts of various sizes including plate/spring washers as required and as directed by the field engineer.

Labour for the security arrangement for switchyard in substations under erection after 3months from the date of site taken over by the contractor to till the date of commissioing /taken over by the O&M wing.(3shift/day)

Typing & printing of Commisioning reports, Booklets.,etc.

Charges for Spiral Binding.

Xerox copy of Commisioning reports, Booklets, Drawings.etc.,

STEEL SUPPLY of 200x100mm RSJ

STEEL SUPPLY of 40mm M.S.Round rod

STEEL SUPPLY of 50 x 8mm M.S.Flat

STEEL SUPPLY of 65x10mm M.S.Flat

STEEL SUPPLY of 125X65 MSChannel

STEEL SUPPLY of 50 x 50 x 6mm M.S.Angle

STEEL SUPPLY of 65 x 65 x 6mm M.S.Angle

STEEL SUPPLY of 100 x 50 mm M.S.Channel

STEEL SUPPLY of 6 mm Chequered plate 6MX1M

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

S.KUMARAPANDIAN

Sp Constructions

K.SARAVANAKUMAR

bharaniengineeringworks

JK ENGINEERS