Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹57.0 LAccepted-AOC | ₹57.0 L | L-1 | Accepted-AOC Agreement done By Contractor |
Updated dates
Tender Value
₹57.3 L
EMD Value
₹57,280
Closing Date
17 Feb 2026, 5:30 pmClosed
Executive Engineer PWD (Maint.) Division No. 2 Bho
Executive Engineer PWD (Maint.) Division No. 2 Bho
Yearly maintenance, repairing and calibration of various testing machines and equipment at Central, Zonal and Circle Testing Laboratory, Public Works Department, Nirman Bhavan, Bhopal.
2026_PWDRB_476728_1
35 of 2025-26 dt. 19/01/2026/4
Open Tender
Civil Works - Others
365 days
Bhopal
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹57,280
18 Jun 2026
21 Jan 2026
19 Feb 2026
21 Jan 2026
17 Feb 2026
21 Jan 2026
Yearly maintenance, repairing and calibration of various testing machines and equipment at Central, Zonal and Circle Testing Laboratory, Public Works Department, Nirman Bhavan, Bhopal. 1st. Call P.A.C. 57.28 Lakh,as per Schedule Attached Complition period 365 Days
Schedule of Item
PAC Rs. 57.28 Lakh Time :- 1 Year
Sieves 45 cm dia. with perforated plate GI frame with Pan and Cover.
A) Maintenance and repairing including replacement of spare parts if required.
(20 Piece)
B) NABL calibration.
(20 Piece)
Sieves 30cm dia. with perforated plate GI frame. Standard IS: 460 with Pan and Cover.
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
(30 piece)
B) NABL calibration.
(30 piece)
Sieves 20 cm dia.WithPan and Cover.
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
(19 piece)
B) NABL calibration.
(19 piece)
Sieves Shaker, Motorized,A digital timer adjustable from 0-99 minutes is incorporated as an integral part of the equipment.
The Sieve Shaker can carry up to 8 sieves. It is driven by a ¼ HP geared motor. The Sieve Table is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is a tapping motion as well.
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Pycnometer having 1 kg Glass jar with Brass Cone, Locking Ring & Rubber Seal.
Standard: IS: 2386 (part 3) Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Liquid Limit Device Motorized, supplied with counter, Casagrandegrooving tool, ASTM grooving tool and gauge block.
Suitable for operation on 220V, 50Hz, I phase AC supply. Standard: IS: 2720 (part 5)
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Shrinkage Limit Set The instrument consists of: Porcelain Evaporating dish, Shrinkage Dish, Glass cup, Perspex Plain Plate with three Metal Prongs, Perspex Plain Plate, Spatula, Graduated Glass Cylinder (25 ml x 0.5 ml), Mercury (750 g.) Standard: IS: 10077
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Compaction Test Apparatus, Light Compaction The instrument consists of:
Compaction mould, complete with Collar & Base Plate (made of Gunmetal), 100 mm ID, 127.3mm height, 1000 ml volume – 01 no, Rammer, 2.6kg x 310 mm fall – 01 no.
Standard: IS: 2720 (PART VII) For light compaction test.
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Compaction Test Apparatus, Heavy Compaction The instrument consists of:
Compaction mould, complete with Collar & Base Plate (made of Gunmetal),150mm ID, 127.3mm height, 2250 ml volume – 01 no, Rammer, 4.9kg x 450 mm fall – 01 no.
IS: 2720 (Part VIII) for heavy compaction test
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Sand Pouring Cylinder Apparatus
The instrument consists of: Sand Pouring Cylinder fitted with conical funnel & shutter - cap. 3 lt., Cylindrical Calibration container - 100 mm ID x 150 mm ht., Metal Tray - size 30x30x4 cm with 10 cm central hole.
Make: AIMIL
Standard: IS: 2720 (Part 28)
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Sand Pouring Cylinder Apparatus
The instrument consists of: Sand Pouring Cylinder fitted with conical funnel & shutter - cap. 16.5 lt., Cylindrical Calibration container - 200 mm ID x 250 mm ht., Metal Tray - size 45x45x5 cm with central hole.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Core Cutter
The instrument should consists of:
Cylindrical core Cutter, made of steel, 100 mm dia x 130 mm long
Steel Dolly, 25 mm high & 100 mm dia., fitted with a lip, to enable it to be located on top of the core-cutter Rammer, with Steel rod. Standard: IS: 2720 (part 29)
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Sample Extractor, hand operated for 38mm dia. specimens Hand operated Extractor, for 38 mm dia specimens for extracting soil core specimens of 38 mm dia from sampling tube or from larger size samplers. The equipment should consist of the following replaceable parts :
• Sample Extractor Frame Screw Type with a Wire Sample Trimmer
• Jarring Link for driving the Sampling Tube
• Adapter with locking screw for fitting the 38 mm dia Sampling Tube to Jarring Link
• Split Mould 38 mm dia x 76 mm long, provided with Quick Release Clamps. It can be fitted to Sample Extractor
• Sampling Tube Unrelieved, 38 mm dia x 200 mm long 1 No.
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Sample Extractor, hand operated for 150 mm dia. specimens.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Digital California Bearing Ratio Test Apparatus, Motorized (3 Speeds) with Gun Metal Moulds Ref. Standards IS:9669, IS:2720 (Part 16)
The apparatus consists :
Load Frame, 50 kN (5,000kgf), Capacity, Three Speed 1.5,1.25, 2.5 mm/min
Mould - Gun Metal, 150m ID x 175 mm H.
Perforated Base Plate - Gun Metal, for Mould.
Extension Collar - Gun Metal 150 mm ID x 50 mm high.
Penetration Piston 50 mm face dia. Adjustable Bracket for Penetration Dial Gauge. Circular Metal Spacer Disc, with detachable handle, 148 mm dia x 47.7 mm high. Annular Metal Weight 2.5 kg, 147 mm dia with 53 mm dia central hole.
Slotted Metal Weight 2.5 kg, 147 mm dia, with 53 mm dia slot. Perforated Plate 148 mm dia, with adjustable stem and lock nut. Metal Tripod for Dial Gauge.
Cutting Collar
Rammer 2.6 kg, 310 mm controlled drop. Rammer 4.9 kg, 450 mm controlled drop.
Electronic outfit for CBR Test, consists of :
2-Channel Digital Indicator, 1 No.
b) Power : 230 ± 10% mains, 50 Hz, Single Phase, AC supply c) No. of channels : 2
Load Cell, 1 No.
a) Capacity : 50 kN (5000 kgf), Compression Type b) Maximum overload : 110% of the rated capacity c) Sensing : Strain Gauges in full bridge configuration
Displacement Transducer, 1 No.
a) Range : ±10 mm b) Sensing element : LVDT
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Triaxial Testing System, Electronic and Triaxial Test System, Electronic
The apparatus consists :
• Load Frame, Motorized, 30 speeds, 50kN (5,000 kgf)
Capacity – 50kN (5000 kgf), types of operation – motorized, rates of strain – 30 rates: 0.00001 to 9.999mm/min. horizontal clearance -364 mm, Vertical clearance – 910mm, maximum platen dia – 133mm, max. platen travel – 100mm.
• Triaxial Cell, 38mm & 50mm dia. For testing specimens of size 38mm dia. X 76mm long & 50mm dia. X 100 mm long. Consists of the following:
• Top loading pad, perspex, 38mm dia. – 01 no. • Plain perspex disc 38mm dia x 6mm thick – 01 pair
• Porous stone 38mm dia x 6mm thick – 01 pair • Sheath stretcher for 38mm dia specimen – 01 no
• Sand former for 38 mm dia specimen – 01 no • Rubber sheath for 38mm dia specimen – 12 nos
• Drainage tube (short), 38mm – 04 nos • Drainage tube (Long), 38mm – 04 nos
• ‘O’ rings for 38mm dia specimen – 08 nos • Brass pedestal for 38mm dia specimen – 01 no
• Top loading pad, perspex, 50mm dia. – 01 no. • Plain perspex disc 50mm dia x 6mm thick – 01 pair
• Porous stone 50mm dia x 6mm thick – 01 pair • Sheath stretcher for 50mm dia specimen – 01 no
• Sand former for 50mm dia specimen – 01 no • Rubber sheath for 50mm dia specimen – 12 nos
• Drainage tube (short), 50mm – 04 nos • Drainage tube (Long), 50mm – 04 nos
• ‘O’ rings for 50mm dia specimen – 08 nos • Brass pedestal for 50mm dia specimen – 01 no
• Split Mould, 38mm dia x 76mm long – 01 no. • Split Mould, 50mm dia x 100mm long – 01 no.
• Top loading pad, 38mm dia. (plain) – 01 no. • Top loading pad, 50mm dia. (plain) – 01 no.
• Constant Pressure System, oil water type with two cells, with following specifications:
• The unit provides variable pressure up to 16bar which can be increased or decreased by turning a control knob. A transparent oil water interchange vessel is provided to transmit water pressure to the test apparatus.
• Range: 10 kg / sq.cm • Resolution: 0.1 kg / sq.cm • Accuracy: ± 1% of the indicated pressure
• Supplied complete with pressure gauge, flow valves, connecting pressure hose
• Suitable for operation on 220V, 50Hz, I phase, AC supply
• Triaxial Electronic conversion kit, consists of the following:
1. Digital Indicator:
• Mode of display: Digital Display. Automatic display & over-range indication.
• Resolution: 1 part in 2000 • Power supply voltage: 220+10% mains
2. Load Cell:
• Capacity: 10kN (1000kgf) • Max overload capacity: 10% of the rated • Load cell excitation: 5V, DC
• Resolution: 0.01kN (1kgf) • Sensing Element: Strain gauges in full bridge configuration.
3. Pore Pressure Transducer:
• Capacity: 20 bar (20 kg/sq.cm)
• Max over load capacity: 150% of rated
• Pressure cell excitation: 5V, DC
• Resolution: 0.01kN (1kgf)
• Sensing Element: Strain gauges in full bridge configuration
4. Displacement Transducer:
• Range: +10mm
• Sensing element: LVDT
Make: AIMIL
Providing, installing / fixing, commissioning, calibration & training to the laboratory staff.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Standard Penetration Test Set with accessories for 30mt depth.
Ref. Standards IS:2131 , IS:9640 including replacement of spare parts and NABL calibration if required.
The equipment consist of the following replaceable parts :
• Split Spoon Sampler 50.8 mm OD and 38 mm ID.
• This sampler consists of :
• Body split lengthwise.
• Shoe hardened with an inside cutting edge.
• Head fitted with a ball check valve and adapter to connect 'A' type drill rod.
• Drive Weight Cast Iron, 63.5 kg, 78 mm bore ID approx.
• Guide Pipe Assembly Bore 73 mm OD approx.
• Tripod with Pulley and built-in Ladder.
• 'A' Type Drill Rods for depth up to 30mt.
• Manila Rope 19mm dia 10 m
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Speedy Moisture Meter Range : 0 - 50%
Gauge Division : 1%
Each instrument is supplied in a carrying case fitted with digital balance for weighing the sample, scoop, Al. bottle fitted moisture gauge, calcium carbide reagent, set of 2 steel balls & cleaning brush.
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Unconfined Compression Tester as per Standards IS:2720 (Part 10), AASHTO T208
The equipment consists of
Load Frame, Motorized 3 speeds, 50kN
Plain Platen with Adapter and Steel Ball
High sensitivity proving ring capacity 2 kN (200 kgf).
Dial Gauge, 25 mm travel, 0.01 mm least count.
Split Mould 38mm dia × 76mm long, Rubber Sheath for 38mm dia specimen
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Aggregate Impact Tester with Blow Counter
The equipment consists of – Cylindrical cup, Metal Measure of 75 mm ID x 50 mm deep, Tamping Rod, Blow Counter, Free fall hammer with locking arrangement.
Free Fall height: 380 + 5 mm
Standard: IS 2386 (part 4)
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration
Crushing Value Test apparatus.
Made up of steel, it comprises of:
Cylindrical cell 150 +/- 0.5mm ID x 130 to 140mm height
Plunger 148 +/- 0.5mm dia x 100 to 115mm height
Base plate 200 to 230 mm square x 6mm thickness
Tamping rod 16mm dia x 450 to 600mm length
Metal measure 110+/- 0.5mm ID x 180 +/- 0.5mm height.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration
Flakiness & Elongation Gauge, having thickness Gauge with ISI Certification Mark, IS:2386 (Part-I).
Constructed from heavy gauge sheet steel. Length Gauge with ISI Certification Mark, IS:2386 (Part-I). Constructed from steel, mounted on a hardwood base
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Density Basket, ruggedly constructed from galvanized wire mesh, 20cm dia. x 20cm high. Standard – IS: 2386 (part 3)
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Cylindrical Metal Measures with ISI Certification Mark, IS:2386 (Part 3).
It consisting of :
Measure 3 liters
Measure 15 liters
Measure 30 liters
Tamping Rod of 16mm dia x 60 cm long having ISI Certification Mark IS:10086
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration
Universal Automatic Compactor for soil Ref Standard IS:2720 (Part 7 & 8) It consist of :
Rammer- circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight. Drop –Adjustable to 31 O mm or 450mm.
Proximity sensor based, suitable for proctor (Light & Heavy) & CBR
The equipment is suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Cone Penetrometer, Automatic (Universal Penetrometer) as per IS : 1203 The unit is compact with built-in Timer to control duration of preset penetration t to 05 sec.
The instrument is provided with lead screw, gear arrangement, leveling screws, spirit level, in build focus light & a magnifier.
The instrument consist of: Basic Unit (Universal Penetrometer), Penetration cone (made of brass with a hardened steel tip), Penetration Needle, Transfer Dish made of copper, Aluminum sample containers (two set), Plunger weighing 47.5 gm, weights of 50 gm and 100 gm.Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Centrifuge Extractor, Electrically Operated with capacity 1500g. It is compact with in-built dimmer stat for speed variation from 0 rpm to 3600 rpm. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Bitumen Mixer, Capacity 5 liter. as per Standard EN 12697-35. Suitable for operation on 220 V, 50 Hz, single phase, AC supply It have :
• Mixing capacity 3-4 kg
• Temperature Range Room temp. to140+5°C
• Speed of blade-Revolution 0-80 rpm
• Speed of blade-Rotation 0-180 rpm
• Heater Capacity 1 kW
• Testing Environment 10-40°C &,< 80 % RH
• Power Supply 220 V, 50 Hz,
• Single Phase AC
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Automatic Compactor for Bitumen mixes as per EN 12697-10-30. Suitable for operation on 230 V, 50 Hz, single phase, AC .
Rugged construction to withstand hard work. Fully automatic and easy to operate. Uniform compaction. Automatic Blow Counter.
The drive mechanism lifts the weight of 4.5 kg and drops it through a height of 457 mm. The rammer foot is removable, which facilitates preheating. A compaction pedestal with specimen holder is fixed to the base. An automatic blow counter enables the number of blows to be preset before each test and automatically stops the machine on completion.
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Ring and Ball Apparatus, Electrical Heating with a heater & Energy Regulator The instrument consist of:
Bath of heat resistant glass, Tampered Rings (two nos), Ball Centering Guide (two nos), Stell Balls of 9.5 mm dia (two nos), Ring Holder, Electrical Heater, Thermometer IP 60C with range "-2 deg.C to 80 deg.C", Thermometer IP 61C with range " 30 deg.C to 200 deg.C. Power requirement: 220 V, 50 Hz, Single Phase, AC supply. Standard: IS : 1205
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Standard Tar Viscometer as per IS: 1206, IP72, STPTC. RT2, RT3, BS:2000, (Part72) Suitable for operation on 220V, 50 Hz, single phase, AC supply For determining the viscosity of cut back bitumen and road oil. The viscometer consists of a chrome plated copper bath, with a drain valve and a central tube to receive the test cup and to position the stirrer, and is mounted on a stand with leveling feet. Stirrer has a curved shield and is provided with an insulated handle, thermometer socket and swivel support for the valve. Supplied complete with 10 mm cup and ball valve as per the model required.
Standard Tar Viscometer, 10 mm cup and ball valve, Electrical Heating with Immersion Heating Elements and Dimmer stat for controlling the temperature. Complete with 10 mm Cup and Valve.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Ductility Testing Machine Electrically Operated as per IS : 1208 The instrument is designed to test three specimens simultaneously.
The machine consist of a carriage moving over a lead screw, an electric motor driven reduction gear unit.
It is also equipped with an electric pump circulator & heater.
The temperature is controlled thermostatically.
Two rates of travel i.e., 5 cm/min & 1 cm/min should be provided.
It is supplied with Ductility Mould with base plate (03 nos).
Power Requirement: 220V, 50 Hz, Single Phase, AC supply
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Pavement Core Drilling Machine with Diamond Core Bit, 100mm dia x 200mm long Ref. EN 12504-1 The Machine comprises of two vertical support columns which carry the drill head/engine assembly accurately with the help of screwed spindle. The 6HP petrol engine with pulley mechanism works with minimum vibrations. The double precision bit advances with screwed spindle which provides a constant, accurate drill pressure, minimum core chipping & long bit life. The complete assembly is supplied on a rigid metal base with leveling facility and is suitable for vertically down coring applications only.
• Bit diameter 150mm
• Maximum depth of core 400mm
• Drill Speed - Variable speed from 900 to 1200rpm
• Drive - 6HP Petrol Engine
• Guide Shafts – 40 mm dia
• Screwed Spindle – 20 mm dia
• Water Tap – 12 mm
• Drill Wrenches - Included
• Diamond Core Bits, 100mm dia x 200mm long
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Vicat Apparatus with Dashpot, with ISI Certification Mark, IS:5513.
The equipment consist of the following replaceable parts :
Vicat Mould, Glass Base Plate, Initial Needle (in Plastic Case), Final Needle (in Plastic Case), Consistency Plunger (in Plastic Case), Mild Steel Base Plate, Vicat Mould Split Type, with Clamping Ring.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Le-Chatelier Mould with ISI Certification Mark, IS:5514.
It consists of a small split cylinder forming a mould of 30mm internal dia. and 30 mm high. Oneithersideofthesplitcy1inder, two parallel indicating arms with pointed ends are fixed. Two loops of suitable material and strength soldered to the upper half of the mould on each side of the central split is provided to facilitate demoulding of the hardened paste specimen after test. The resilience of the mould shall be such that the action of a mass of 300g applied shall increase the distance between the indicator ends of the needle by 17 .5mm + 2.5mm without permanent deformation. The mould is supplied complete with two glass plates and lead weight.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Air Permeability apparatus, Blaine type with ISI Certification Mark, 15:5516. It is a variable flow type Air Permeability Apparatus and
The equipment consist of the following replaceable parts :
Permeability Cell. 'U' Tube Manometer, mounted on stand, Perforated Metal Disc, Plunger, Rubber Stopper, Rubber Tube, 20 cm long, Filter Paper Discs (Twelve Nos.), Dibutylphtha late Liquid, 100 ml bottle, Punch, Non Perforated Disc, Suction Bulb.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Cylindrical Mould, Cast Iron, Split Lengthwise 150mm dia x 300mm high, with ISI Certification Mark, IS:10086
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Mould, Cast Iron, for 150mm cube with ISI Certification Mark, IS:10086
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Beam Mould, 100mm x 100mm x 500mm specimens
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Mould, steel, for 70.6mm cube, with ISI certification mark, IS: 10080
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Vibration Machine as per IS:4031 , IS:10080, EN 196-1 413-2, EN 13454-2, Suitable for operation on 220V, 50Hz, Single Phase, AC supply A specially designed Vibration Machine is used for vibrating the mix in moulds at a frequency of 12,000 ± 400 cycles per minute, as per specifications. The Vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The centre of gravity of the vibrator, including the cube and mould, is either at the centre of the eccentric shaft or within 25mm below it.
The machine with NABL calibration certificate for its frequency.
The equipment consist of the following replaceable parts :
Mould Steel, for 70.6 mm Cube with ISI Certification Mark as per IS:10080, Side Spring, Supporting Springs (Set of four), Springs, for Fitting Mould (Set of two), Endless Belt, Belt Guard, Eccentric Shafts with bearing.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration
Laboratory Concrete Mixer, Capacity 1 cubic ft. Suitable for operation on 220V, 50Hz, Single Phase, AC supply The mixer consists of a steel vessel of 30 liters, mounted on a frame. The vessel is rotated at 20-24 RPM with the help of a motor and a pulling. The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge. Blades are provided inside the vessel to mix the material thoroughly. The large handle strip facilitates manual rotation of the drum during power failure. The drum, handle and motor etc. are mounted on a steel frame. This model is provided with two large wheels for carting away. Supplied complete, with motor of 1 HP along with lead wire.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Vibrating Table, Table Top 1m x 1m as per : EN 12350-6, 7, 12390-2, 13286-50 Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
suitable for 16 moulds of 150mm cube
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Slump Test Apparatus
Ref. Standards IS:7320, BS:1881 , ASTM C 143,AASHTOT119
The equipment consist of the following replaceable parts :
• Slump Cone
• Base plate with cleats & swivel handle
• Tamping rod steel, 10 mm dia x 600 mm length with ISI certification mark IS : 10086.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Compression Testing Machine with 2000kN & 500kN Suitable for concrete cube / cylinder testing & for cement mortar cube / brick testing With loading range of 2000kN
Loading range: 2000kN, Least count: 0.1 kN, Max. clearance between platens: 370mm, Max. clearance between side platens: 340mm, Platen size: 222 mm dia. circular
Piston Dia.: 222 mm, Piston stroke: 50mm Motor HP: 1, Power Req.: 220 V/ 230 V, I Phase, 50 Hz, AC Supply
Platen Hardness : 612 HV (55 HRC), Motor make: GODREJ or Crompton Greaves, Specimen: 100mm, 150mm cube, 100mm & 150mm dia. cylinder, Loading range: 500kN, Least count: 0.02 kN, Max. clearance between platens: 435mm
Max. clearance between side platens: 260mm, Platen size: 140 mm square, Piston Dia.: 157 mm, Piston stroke: 50mm Motor HP: 1 Power Req.: 220 V/ 230 V, I Phase, 50 Hz, AC Supply, Platen Hardness : 612 HV (55 HRC)
Motor make: GODREJ or Crompton Greaves; Specimen: 50mm, 70.6mm cube, bricks
features are:
• Calibration within 1% of full scale deflection with traceability to NABL. • Facility of adjusting maximum load with tripping arrangement. • Max load is held and retained for approx. 15 min., unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator.
• Flexure test attachment can be attached • Meets the key specifications of IS -516 & IS 14858
• Pace deviation bar graph, Automatic stress determination and display.
• Overload safety protection, Self-aligning platen with fast accessory change capability.
• Flexible Calibration Points. Calibration can be done on 5 to 10 points.
• Peak Load, Peak Stress, Unique Record No. is displayed; EDI has provision to set more than one Mode.
• Dynamic Calibration, Menu Driven sample details, Password protection for system & calibration setup
• Data storage approx. 2000 records, Store records can be viewed.
• User can set break point, Peak stress calculation based on sample type and shape.
• CVT supplied to ensure constant voltage to digital indicator.
• 2% overload facility to calibrate the machine up to full capacity.
• Start, Stop, Pause & Reset facility, Multifunction Keyboard
• Powder coating finished surface, Front gate for protection, Pump with brass casing
The complete unit comprises of :-
• Loading Unit – 02 nos, one each for 2000kN & 500kN
The loading frame has a fully welded construction with a top crosshead, base and solid side walls. The precision ground hydraulic piston is fixed to the base and the machine’s platens are hardened, ground, and polished. The upper platen comes with a self-aligning action and suitably sized spacers are also provided as standard to accommodate a variety of different sizes of specimens.
• Pumping Unit : 01 no. (common for 2000kN & 500kN)
The two-speed pump allows the fast approach of the platens for daylight closure, and also allows precise control over the load application using a control lever and valve. A pace rate bar on the display gives operator feedback on the loading rate. There will be one pumping unit, common for 2000 kN& 500 kN, with all necessary accessories.
• The Digital Readout unit : 01 no. (common for 2000kN & 500kN)
The controller incorporates a digital display, with values of force and stress in English/Imperial, metric, or SI units and features the integral load pacing bar display in kN/sec or lbf/sec. The direct display of ultimate strength in MPa. The unit will be with two modes, one each for 2000kN & 500kN.
• Hydraulic oil in three 5 liter PVC containers, five spacers with locating pins. One step pin & one ring for lower platen to sit on the spacer or jack cover, two spanners. One lifting handle for ram, One connecting pipe with end couplings.
• Calibration chart for DPU
• One copy of Operating Instruction with General Assembly Drawing.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Rebound Hammer Ref. Std.: BIS 13311 -1992 (Part2) & ASTM C805, 05873 and The concrete test hammer is an instrument used for the non-destructive testing of concrete. It allows one to have a quick estimate of the strength of concrete. Since it simply gives an indication based on surface properties.
• Measuring Range 10 to 70 N/mm2
• Impact energy 2.207Nm
Supplied with NCCBM calibration certificate
Make: AIMIL
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Ultrasonic Pulse Velocity Meter for Concrete
The full kit includes:
§ Display unit
§ Two 54kHz transducers
§ Two BNC (3 meter) cables, Calibration rod of 25 µs
§ Ultrasound couplant – 02 nos
§ USB charger with USB cable, 4 x AA (LR6) batteries
§ Data carrier with software
§ Carrying case, Operating manual
Technical Specifications:
Transit time measurement
Range: 0.1 – 9999 µs
Resolution: 0.1 µs
Display: 79 x 21 mm passive matrix OLED (256 x 64 pixel)
Transmitter: Optimized energizing pulse 125V, 250V, 350V, 500V, AUTO
Receiver
Bandwidth: 20kHz – 500kHz
Memory: Nonvolatile, >500 measured values
Regional settings: Metric & Imperial units supported
Power supply
Battery: 4 x AA batteries, primary or rechargeable (>20 hrs continuous use)
Power ratings: 3, 6 to 6 volt
Mains: Via USB charger
PC: Directly via USB cable
Analog output: Combined trigger & waveform (2V) output for oscilloscope, BNC
Mechanical
Dimensions: 172 x 55 x 220mm
Weight: 1.3 kg. (incl. batteries)
Environmental conditions
Operating temperature: -10 deg.C to +60 deg.C (0 to 140 F)
Humidity: <95%RH, non-condensing
Standards: EN 12504-4, ASTM C 597-02, BS 1881 part 203 (UK), ISO 1920-7:2004 (International), IS 1311 (India)
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Modulus of Rupture Testing Machines (M.O.R.), Cap. 10kN, Electrically Operated. As per IS 771 Loading Unit : The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided. Pumping Unit The hydraulic pumping unit is Electrically operated. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration.
Tile Abrasion Testing Machine as per IS:1237, 1706 The tile sample is pressed under a specified load against a grinding path, strewen evenly with an abrasive powder, revolving at the rate of 30 ± 1 rpm. At the end of 100 revolutions of the disc, the second parallel side of the tile is subjected to wear an equal number of revolutions of the disc. The wear of the tile is measured using AIM48101 thickness measuring device (which is supplied at extra cost). The Abrasion Testing Machine consists of a replaceable grinding path, fitted on to a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counterbalanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder. Supplied complete with automatic pre-set revolution counter and one 7.5 kg weight, but without abrasive powder and thickness measuring device. Suitable for operation on 415 V. 50 Hz, 3 Phase AC supply
C) Maintenance and repairing including replacement of spare parts if required.
D) NABL calibration.
Table top Digital Weighing Scale capacity 6 kg LC 0.1 gm
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Digital Weighing Scale capacity 30 kg LC 1 gm
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Digital Weighing Scale capacity 30 kg LC 2 gm.
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Digital Weighing Scale capacity 500 gm LC 0.01 gm.
A) Maintenance and repairing including replacement of spare parts if required.
B) NABL calibration
Sand equivalent test apparatus set and
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
GMM test apparatus with 5 liter conical flask and vacuum pump
A) Maintenance and repairing including replacement of spare parts if required
B) NABL calibration.
Marshall Apparatus with Electronic outfit and Marshall Apparatus consists of :
• Single Speed, Bench top load frame • Max. loading capacity, 50 KN
• Geared Screw jack and Motor Drive, • Precise speed
• Limit Switch Protection for both upward and downward travel, • User friendly and easy to use controls A thermal overload type 550-1, • Power Switch at the rear of the machine provides electrical protection.
• Platen movement is controlled from the front panel, by 3 push button switches, Up, Down and Stop.
• A Ball seated screw fitting located on the cross head accepts load cells and load transducers up to and including 50kN. • The equipment is a table top loading frame, with adjustable crosshead mounted on columns attached to sturdy base. • The forces applied are generated by a screw jack via a reduction unit with worm gears housed in the base casting. Motive Power is from an electric motor via a multi-vee drive belt and provides a platen speed of 50.8mm I min.
• The worm reduction unit is a grease packed on assembly and should not normally require lubrication.
Specifications :
• Maximum Vertical Clearance (Platen Down, Cross-head up) – 470 mm
• Minimum Vertical Clearance (Platen up, Cross-head down) - 250 mm
• Horizontal Clearance – 265 mm • Platen Diameter – 133 mm
• Platen Travel – 25 mm • Platen Speed – 50.8 mm/min
• Rated Power – 375 W • Dimension (I x w x h) – 550 x 400 x 870 mm
• Weight – 60 kg The equipment consists of the following:
• Marshall Load Frame Cap 50kN speed-50.8mm/min - 1 No. • Breaking Head Stability Mould - 1 No.• Compaction Mould Steel, cylindrical - 3 Nos. • Base Plate - 3 Nos. • Extension Collar - 3 Nos. • Compaction Pedestal, - 1 No. • Manual Operation, comprising a Steel Plate capped on a wooden post. A Mould Clamp is fitted to the top of the plate • Compaction Hammer for use with Compaction Pedestal and Mould, weight 4.5 kg with a free fall of 457 mm – 2 nos, • Load Transfer Bar - 1 No. • Sample Eject for 4” dia Sample - 1 No. • Dial Gauge 25mm travel, 0.01mm least count - 1 No., • Proving Ring capacity 25 kN. - 1 No.
Electronic outfit consists of :
1. Two-Channel Digital Indicator-1 No.
b) Power : 230 ± 10% mains, 50 Hz, Single Phase, AC supply
c) No. of channels : 2
2. Load Cell-1 No.
a) Capacity : 50 kN (5000 kgf), Compression Type
b) Maximum overload : 110% of the rated capacity
c) Sensing : Strain Gauges in full bridge configuration
3. Displacement Transducer-1 No.
a) Range : ±10 mm
b) Sensing element : LVDT
Make: AIMIL
A) Maintenance and repairingincluding replacement of spare partsif required.
B) NABL calibration.
Total
Sub. Engineer
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
DOCUMENT.pdf
Tender Documents • 11.03 MB
BOQ_560713.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid