Widening and Strengthening of Saraimohiddinpur patti narendrapur road (ODR) in District Jaunpur (Including 5 year Maintenance)

Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all lifts and leads upto 1000 metres. (including cost of material T&P labour but excluding GST)

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (including cost of material T&P labour but excluding GST)

Construction of Embankment with Material Deposited from Roadway Cutting:- Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. (including cost of material T&P labour but excluding GST)

Construction of Embankment with Material obtained from Right of way:-Construction of embankment with approved material obtained from right of way with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (including cost of material T&P labour but excluding GST)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (including all taxes, labour cess etc but excluding GST.)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (including cost of material T&P labour but excluding GST)

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. (Including cost of material, Bitumen & Labour cess etc but Excluding GST.)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(Including cost of material, Bitumen & Labour cess etc but Excluding GST.)

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Including cost of material, Bitumen & Labour cess etc but Excluding GST.)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder(VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Including cost of material, Bitumen & Labour cess etc but Excluding GST.)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (including all taxes, labour cess etc but excluding GST.)

Plain cement concrete M15 in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundationand compacted by vibration including curing for 14 days foundation. (including cost of material T&P labour but excluding GST)

RCC Grade M20 using batching plant transit mixer & manual placing Concrete from sub-analysis of concrete rate using batching plant 20 cum capacity. (including cost of material T&P labour but excluding GST)

Supplying, fitting and placing HYSD bar reinforcement in super structure complete as per drawing and technical specifications as per SI No-504 (including cost of material T&P labour but excluding GST)

Concrete with 4cm. gauge brick ballast, sand of 1.25 F.M. and cement in proportion of 8:4:1 in foundation and under floors including supply of all materials labour and tools and plants etc. required for proper completion for the work. S.I. No 275 (including all taxes, labour cess etc but excluding GST.)

Providing and laying of RCC Hume Pipes NP-3 inculidng collars/ spigot jointed with stiff mixture of cement in the proportion of 1:2 (1 cement : 2 find sand) including testing of joints. 450mm dia N.S S.L No 26 (including all taxes, labour cess etc but excluding GST.)

Providing and laying of RCC Hume Pipes NP-3 inculidng collars/ spigot jointed with stiff mixture of cement in the proportion of 1:2 (1 cement : 2 find sand) including testing of joints. 600mm dia N.S S.L No 26 (including all taxes, labour cess etc but excluding GST.)

Providing and laying of RCC Hume Pipes NP-3 inculidng collars/ spigot jointed with stiff mixture of cement in the proportion of 1:2 (1 cement : 2 find sand) including testing of joints. 900mm dia N.S S.L No 26 (including all taxes, labour cess etc but excluding GST.)

M-150 brick work in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. S.I.No 305B (including all taxes, labour cess etc but excluding GST.)

Reinforced cement concrete M-15 grade Kilometer stone of standard design as per IRC:8-1980, fixing in position including including painting and printing etc. (including cost of material T&P labour but excluding GST)

Reinforced cement concrete M-15 grade Hectometer stone (precast) of standard design as per IRC:8-1980, fixing in position including including painting and printing etc. (including cost of material T&P labour but excluding GST)

Road Marking with Hot Applied Thermoplastic Compund with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compund 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. Morth-803 (8.13) (including all taxes, labour cess etc but excluding GST.)

Providing and laying of hot applied thermoplastic compound 5mm thick including refectorising glass beads@ 250 gms per sqm area.thickness of 5mm is excludive of surface applied glass beads as per IRC-35-2015 the finished surface to be level, uniform and free from streaks and holes. Morth-803 (8.13) base (including cost of material T&P labour but excluding GST)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for certificate of having the sheeting tested for coefficient of retro reflection, daytime colur and luminance shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years of launching of product by the manufacture in abroad alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally in such a situation the employer/Client if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirment of three years oudoor weathering of the sheeting as per IRC 67:2012 Legends, letters, numerals and borders etc shhould be as per MoRTH specification No-801.3.7 proof of the same in form of government report shall be uploaded while quoting tender. 90cm high Octangon MoRTH-801 (8.4) 90cm high Octangon (On Village link roads- for Stop Sign Caution Board) (including cost of material T&P labour but excluding GST)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for certificate of having the sheeting tested for coefficient of retro reflection, daytime colur and luminance shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years of launching of product by the manufacture in abroad alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally in such a situation the employer/Client if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirment of three years oudoor weathering of the sheeting as per IRC 67:2012 Legends, letters, numerals and borders etc shhould be as per MoRTH specification No-801.3.7 proof of the same in form of government report shall be uploaded while quoting tender. 60cm Circular with diffinitation plate (20cm x60cm) MoRTH-801 (8.4).(School Board 60cm equilateral tringle). (including cost of material T&P labour but excluding GST)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for certificate of having the sheeting tested for coefficient of retro reflection, daytime colur and luminance shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years of launching of product by the manufacture in abroad alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally in such a situation the employer/Client if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirment of three years oudoor weathering of the sheeting as per IRC 67:2012 Legends, letters, numerals and borders etc shhould be as per MoRTH specification No-801.3.7 proof of the same in form of government report shall be uploaded while quoting tender. 80mm x60mm rectangular with diffinitation plate (20cm x60cm) MoRTH-801 (8.4) (Village Board 80x60cm) (including cost of material T&P labour but excluding GST)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for certificate of having the sheeting tested for coefficient of retro reflection, daytime colur and luminance shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years of launching of product by the manufacture in abroad alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally in such a situation the employer/Client if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirment of three years oudoor weathering of the sheeting as per IRC 67:2012 Legends, letters, numerals and borders etc shhould be as per MoRTH specification No-801.3.7 proof of the same in form of government report shall be uploaded while quoting tender. 60mm rectangular with diffinitation plate (20cm x60cm) MoRTH-801 (8.4)) (Speed Limit Board 60cm Circular)(including cost of material T&P labour but excluding GST)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for certificate of having the sheeting tested for coefficient of retro reflection, daytime colur and luminance shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years of launching of product by the manufacture in abroad alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally in such a situation the employer/Client if so desires, could seek for a performance guarantee which would be released after receipt of certificate

meeting the requirment of three years oudoor weathering of the sheeting as per IRC 67:2012 Legends, letters, numerals and borders etc shhould be as per MoRTH specification No-801.3.7 proof of the same in form of government report shall be uploaded while quoting tender. 30x 90 cm (Left/Right) object Hazard MoRTH-801 (8.4)(Hazard Board 30x90cm). (including cost of material T&P labour but excluding GST)

Part B Maintainance cost :- Maintainance cost will be paid year wise as per Government order No. 17/2024/SA-113/23-12024-23-1099/113/2023 Date 16.01.2024 and HQ UPPWD Lucknow order No. 3689COPRMC/Mul-23-24 Date 17-02-2024 Maintainance cost will adjusted as per final cost of construction and will be paid accordingly.

The routine Maintainance Sarimohiddinpur Pattinarendrapur (ODR) marg. including embankment, Patri, Road Sides, Cross Drains Hume Pipe Culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. including cost of material T&P labour cess, etc. but Excluding cost of GST ) For 1st Year maintenance Cost

The routine Maintainance Sarimohiddinpur Pattinarendrapur (ODR) marg. including embankment, Patri, Road Sides, Cross Drains Hume Pipe Culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. including cost of material T&P labour cess, etc. but Excluding cost of GST ) For 2nd Year maintenance Cost

The routine Maintainance Sarimohiddinpur Pattinarendrapur (ODR) marg. including embankment, Patri, Road Sides, Cross Drains Hume Pipe Culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. including cost of material T&P labour cess, etc. but Excluding cost of GST ) For 3rd Year maintenance Cost

The routine Maintainance Sarimohiddinpur Pattinarendrapur (ODR) marg. including embankment, Patri, Road Sides, Cross Drains Hume Pipe Culvert etc to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the actual Completion Date and ends after five years. including cost of material T&P labour cess, etc. but Excluding cost of GST ) For 4rth Year maintenance Cost