Additional improvements works to the BPC colony Park in ward no 20, North Zone.

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 cum. in volume including rough dressing and dumping the excavated materials away from work site manually within 10m initial lead and 2m initial lift as per the direction of Engineer-in-charge.

Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with standard specification.

Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as RCC COLUMN FOOTING, PLINTH BEAM, STAIRCASE STEPS etc., in all floors using mild steel sheets of size 90cm X 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarinas props at suitable intervals etc., complete complying with standard specification and as directed.

Supplying and erecting SHUTTERING including necessary supports for plane surfaces in foundation and in all floors for RCC Column etc., using mild steel sheets of suitable size and BG 10 stiffened with welded mild steel etc.,

Supplying and erecting CENTERING AND SHUTTERING with necessary supports for plane surfaces such as RCC SLABS,LINTEL SUNSHADES, etc., with all cross bracings using mild steel sheets etc., complete

Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification

Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for All RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete.

BRICK WORK in cement mortar 1:5 (one cement and five sand) using best quality of second class (Table molded chamber burnt ) bricks of size 9"x4 ½"x3" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost.

PLASTERING with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications.

PAINTING new IRON WORKS for doors, windows and Ventilators, Iron bars Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over a base coat of red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. The paint to be used should be got approved by the Executive engineer before use on work.

PAINTING OLD IRON WORKS for doors, windows and Ventilators, Iron bars Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over a base coat of red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. The paint to be used should be got approved by the Executive engineer before use on work.

Painting with two coats of Emulsion paint using good quality and approved colour over a base coat of white cement including cleaning, curing etc. complete. (The paint to be used should be got approved by the Executive engineer before use on work).

Filling with River sand layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer.

Filling with Well gravel layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer.

Filling with stone dust layer by layer cost including watering and consolidations etc. complete as per the direction of departmental officer.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base,sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification

Supply and fixing of ornamental Park benches of size 1.20m x 0.45m each for leg and rest. The seat using 100 mm x 25 mm M.S. rectangular section of 14 SWG and the leg using 50 mm dia M.S.pipe of 3mm. The benches are treated with zinc chromate approved by the Executive engineer before use on work.

Supply of jungle zim using 32mm dia M.S.pipe of 2mm the running four Layers horizontally and 10 Nos of vertical pipe made of 42 mm dia M.S.pipe of 2mm thick to a height 1.80 m at the edges and centre pipe 2.10 m height approved by the Executive engineer before use on work.

Supply and fixing of slide with Ladder park model using 2Nos of 35mm dia MS.pipe of 14 SWG for standing and sliding, Platform sheet of size 0.45m x 0.90m made of S.S sheet of 16 SWG. Sliding sheet of size 2.40m x 0.45m made of fibre sheet of 14 SWG, and side rails for child to hold while. Climbing is made of 75mm x 25mm thick 14 SWG to a length of 4.50m for both sides. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Wiring with 2x1.5sq.mm(22/0.30) PVC insulated sc unsheathed copper conductor of 1100 V grade in suitable heavy gauage MS conduct pipe concelaed in wall and ceiling with ms accessories with ms switch box in flush with wall with 5A ft switch with 3mm thick light point SD 8

Supply and fixing of 20w LED lamp with unbreakable poly carbonate doom and 1.5 sq.m 3 core PVC insulation wire 6m length including wiring charges etc., complete.

Providing Pile Foundation of size 300mm dia using augur including labour charges and all other tools and plants charges etc., as per direction of departmental officers

Cement concrete 1:2:4 (one cement, two sand and four aggregate) using 20mm gauge hard broken granite stone jelly for All plain CC items of work excluding centering, shutterin, and cost of reinforcement grill but including curing finishing etc., complete

Supply and erection of 6 Metre Length Single Bracket GI STEEL TUBULAR POLE FOR STREET LIGHT Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length with necessary fittings including transportation and all labour charges etc completed as per directed by Department officer (PWD M2119)

Supply and delivery of 48W LED street light fitting with LED (Higher end)

Supply and run of 4 sq.mm PVC Insulated Single Core Muti Strand Fire Retardant Flexible Copper Cable with ISI Mark etc., Complete as per directional of Departmental Officers.

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete as per directional of departmental officers. - SD-193

Labour Charges for Fixing of 48W LED Fittings etc., Complete etc Complete as per directional of Departmental Officers.

Add :- GST @ 18%