Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 LAdmitted-Finance B 1 1769 PREM NAGAR KOTKAPURA | ₹13.1 L | L1 | Admitted-Finance |
| 2 | L2₹22.4 L+₹9.4 L (71.7%)Admitted-Finance | ₹22.4 L+₹9.4 L (71.7%) | L2 | Admitted-Finance |
| 3 | L3₹27.1 L+₹14.0 L (107.3%)Admitted-Finance PO DHAN SINGH WALA GONIANA DISTT BATHINDA | GONIANA | BATHINDA | PUNJAB | ₹27.1 L+₹14.0 L (107.3%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SURJIT SINGH AND SONS L1 | P K TRADERS L2 | M/S H.S. CONSTRUCTIONS, BATHINDA L3 |
|---|---|---|---|---|---|---|
| 1.00 | Supply and erection of Switch
Disconnector Fuse Unit with HRC Fuses
(Suitable for DIN HRC Fuses) in sheet
enclosure on the existing surface
Confirms to IS 13947 (Part-III), IEC 60947-
3 complete with G.I. Bolts, Nuts &
Connections on both sides of switch
with suitable size of thimbles, including
cost of DIN HRC fuses as per PWD
General Specifications:-SDF TP&N 630Amp., 415volts (With Sheet
Enclosure) | 1 | Each | 50,000 ₹50,000 | 45,000 ₹45,000 Lowest | 55,000 ₹55,000 |
| 2.00 | SDF TP&N 400Amp., 415volts (With Sheet
Enclosure) | 1 | Each | 2,000 ₹2,000 Lowest | 31,500 ₹31,500 | 35,000 ₹35,000 |
| 3.00 | Supply and erection of On Load Change
over Switch with advance neutral UNIT
(Panel mounting Cubical type) in the
existing Cubical Panel Confirms to IS
13947 (Part-3) complete with G.I. Bolts,
Nuts & Connections on both sides of
switch with suitable size of thimbles as
per PWD General Specifications:-On Load Change Over Switch Four Pole
800amp., 415volts | 1 | Each | 80,000 ₹80,000 | 75,000 ₹75,000 Lowest | 85,000 ₹85,000 |
| 4.00 | Supply and erection of PVC insulated FR
single core Unsheathed copper
conductor cable (ISI marked) suitable
upto 1100 volts grade confirm to
IS:694/1990 left bare in pipe or casing of
suitable size complete in all respect as
desired by the Engineer-in-charge:-Overall size 2.5sq.mm (Un-sheathed) | 2,250 | Rmtr | 65 ₹1,46,250 Lowest | 75 ₹1,68,750 | 95 ₹2,13,750 |
| 5.00 | Overall size 4sq.mm (Un-sheathed) | 3,150 | Rmtr | 115 ₹3,62,250 | 100 ₹3,15,000 Lowest | 120 ₹3,78,000 |
| 6.00 | Overall size 10sq.mm (Un-sheathed) | 180 | Rmtr | 150 ₹27,000 Lowest | 280 ₹50,400 | 300 ₹54,000 |
| 7.00 | Designing, Supply, Erection, Testing &
commissioning of indoor Type LT cubical panel
enclosure (dust, vermin and interchangeable
modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55). Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control
panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA
type. The base channel will be made out of 75 x 40 x 5mm rolled channel.-LT Panel enclosure having space for 1No.
Incomer MCCB 630Amp. and 6Nos.
outgoing MCCB's 40amp. to 250amp.
(Option: MCCB 200-250amp.= 1No. and
MCCB's 40-100amp.= 5Nos.) according to
the requirement at site (Approx. size 1475 x
1800 x 400mm) | 1 | Each | 1,00,000 ₹1,00,000 Lowest | 1,65,000 ₹1,65,000 | 1,75,000 ₹1,75,000 |
| 8.00 | Supply and erection of Moulded Case
Circuit Breaker (Panel mounting Cubical
type) in the existing Cubical Panel
(confirm to IEC:60947-2) having
Ics=100% Icu, 100% neutral with
spreader terminal links, Extended rotary
handle and relevant PWD general
specifications complete with G.I. Bolts,
Nuts & Connection on both sides of
MCCB with suitable size of thimbles etc:-MCCB Four Pole 630amp., 415volts, ≥36kA
Microprocessor Based Adjustable Thermal
and Magnetic Setting | 1 | Each | 80,000 ₹80,000 | 60,000 ₹60,000 Lowest | 65,000 ₹65,000 |
| 9.00 | Supply, laying and erection of aluminium
conductor XLPE insulated PVC sheathed
armoured and served cable 1100 volts
grade as per IS:7098 (Part-1)1988 to be
laid (On Surface) as per PWD General
Specifications:-Overall size 300sq.mm (3½ Core) Armoured
(On-Surface) | 25 | Rmtr | 100 ₹2,500 Lowest | 3,500 ₹87,500 | 4,500 ₹1,12,500 |
| 10.00 | Overall size 150sq.mm (3½ Core) Armoured
(On-Surface) | 50 | Rmtr | 100 ₹5,000 Lowest | 1,800 ₹90,000 | 2,000 ₹1,00,000 |
Tender Value
₹14.6 L
EMD Value
₹29,150
Closing Date
4 Jun 2026, 3:00 pmClosed
Sr.Xen CWD PSTCL Patiala
O/o Sr XEN Civil Works Division Flat no. 28, Officers Flat Complex, PSTCL , Near 23 No. Fatak, Patiala
Work of Providing and Fixing Switch disconnector unit,replacing wiring,new wiring and drainage system for the work of Installing 70 no. ACs at Shakti Sadan Building, PSTCL, Patiala
2026_POWER_168452_1
15/2026-27
Open Tender
Civil Works
Item Rate
90 days
Shakti Sadan, PSTCL
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹29,150
Yes
5 Jun 2026
15 May 2026
5 Jun 2026
15 May 2026
4 Jun 2026
15 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and erection of Switch
Disconnector Fuse Unit with HRC Fuses
(Suitable for DIN HRC Fuses) in sheet
enclosure on the existing surface
Confirms to IS 13947 (Part-III), IEC 60947-
3 complete with G.I. Bolts, Nuts &
Connections on both sides of switch
with suitable size of thimbles, including
cost of DIN HRC fuses as per PWD
General Specifications:-SDF TP&N 630Amp., 415volts (With Sheet
Enclosure) | - | Each | 25,713.75 | - |
| - | SDF TP&N 400Amp., 415volts (With Sheet
Enclosure) | - | Each | 16,333.75 | - |
| - | Supply and erection of On Load Change
over Switch with advance neutral UNIT
(Panel mounting Cubical type) in the
existing Cubical Panel Confirms to IS
13947 (Part-3) complete with G.I. Bolts,
Nuts & Connections on both sides of
switch with suitable size of thimbles as
per PWD General Specifications:-On Load Change Over Switch Four Pole
800amp., 415volts | - | Each | 37,922.95 | - |
| - | Supply and erection of PVC insulated FR
single core Unsheathed copper
conductor cable (ISI marked) suitable
upto 1100 volts grade confirm to
IS:694/1990 left bare in pipe or casing of
suitable size complete in all respect as
desired by the Engineer-in-charge:-Overall size 2.5sq.mm (Un-sheathed) | - | Rmtr | 38.57 | - |
| - | Overall size 4sq.mm (Un-sheathed) | - | Rmtr | 55.71 | - |
| - | Overall size 10sq.mm (Un-sheathed) | - | Rmtr | 149.29 | - |
| - | Designing, Supply, Erection, Testing &
commissioning of indoor Type LT cubical panel
enclosure (dust, vermin and interchangeable
modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55). Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control
panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA
type. The base channel will be made out of 75 x 40 x 5mm rolled channel.-LT Panel enclosure having space for 1No.
Incomer MCCB 630Amp. and 6Nos.
outgoing MCCB's 40amp. to 250amp.
(Option: MCCB 200-250amp.= 1No. and
MCCB's 40-100amp.= 5Nos.) according to
the requirement at site (Approx. size 1475 x
1800 x 400mm) | - | Each | 85,413.39 | - |
| - | Supply and erection of Moulded Case
Circuit Breaker (Panel mounting Cubical
type) in the existing Cubical Panel
(confirm to IEC:60947-2) having
Ics=100% Icu, 100% neutral with
spreader terminal links, Extended rotary
handle and relevant PWD general
specifications complete with G.I. Bolts,
Nuts & Connection on both sides of
MCCB with suitable size of thimbles etc:-MCCB Four Pole 630amp., 415volts, ≥36kA
Microprocessor Based Adjustable Thermal
and Magnetic Setting | - | Each | 34,848.21 | - |
| - | Supply, laying and erection of aluminium
conductor XLPE insulated PVC sheathed
armoured and served cable 1100 volts
grade as per IS:7098 (Part-1)1988 to be
laid (On Surface) as per PWD General
Specifications:-Overall size 300sq.mm (3½ Core) Armoured
(On-Surface) | - | Rmtr | 1,880.36 | - |
| - | Overall size 150sq.mm (3½ Core) Armoured
(On-Surface) | - | Rmtr | 1,006.34 | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 4.74 MB
1Mainpageacfitting.pdf
Tender Documents • 0.33 MB
2TandC1acfitting.pdf
Tender Documents • 0.64 MB
3techspec.pdf
Tender Documents • 2.61 MB
BOQ_343075.xls
BOQ • 0.36 MB
APPROVEDDNITAC70.pdf
Tender Documents • 1.96 MB
Corri1SSElectricalfitting.pdf
PDF • 0.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .