Upgradation of Power distribution system with DG set and Automatization at Priyadarshani Indira Gandhi Sports Club, Mulund under BMC jurisdiction.

Amount

D.G.SET WITH PANEL -400KVA

D.G.SET WITH PANEL -750KVA

Cement concrete foundation using M-20 cement concrete mix with J shaped foundation bolts where required

Excavation for foundation, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building works in soft/ disintegrated rock, sand stone, stiff clay, gravel, cobblestone, hard laterite, water bound macadam, wet mix macadam, asphalt mix carpet of any type, pitching, soling, paths and hardcore, lime concrete, plain cement concrete, stone masonry and all types of brick/ block masonry below ground level, rock boulders, etc. for depths/ lifts upto 1.5M measured from the ground level, including dressing/ trimming the sides, leveling of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve not less then 97% Modified Proctor density conforming to relevant IS, stacking in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed, loading, unloading, leveling excluding shoring, strutting etc. complete as directed by Engineer-in-Charge. Note: 1) The rate includes the handling/supporting the existing utilities such as cables, drains, pipes, water mains etc. 2) It also includes the royalty and other taxes if any.

Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip / 8 SWG GI wire up to chamber (wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, backfilling, removal of excess soil is included in the scope

600 X 600 X 3.15 mm Copper Plate, 3000mm dip with suitable size cu strip earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25X3 cu strip / 2X8SWG Cu.wire up to chamber, disconnecting links with 600 x 600 mm (clear) RCC chamber & 3mm thick heavy duty CI chequered plate cover with hinge. Bentonite shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope

Earthing Continuity Conductors -25 x 3mm Tinned copper

Earthing Continuity Conductors -25 x 3mm GI

1.1 kV grade stranded Cu conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables - 3.5C x 300 Sq.mm

1.1 kV grade stranded Cu conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables - 6C x 2.5Sq.mm

Cable End Termination For Copper Cables – 3.5C x 300 Sq.mm

Cable End Termination For Copper Cables – 6C x 2.5 Sq.mm

Fiber Optic Cable 79)

Excavating the trenches and refilling the same after the cable is laid in approved manner (Size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 Cu. Mtr. = 2.2 RMT. And reinstatement.

Nominal Mix of 1:1:5:3 (1cement OPC: 1.5 Coarse sand :3 Graded Stone aggregate 20 MM Nominal Size)

G.I. Cable tray with all other accessories 450 x 75mm (W x H) - (14SWG - 2mm) with cover

Supply & Laying of double wall corrugated (DWC) pipe 175 mm OD / 148 mm I.D.

DG Sync Panel INCOMER SECTION: a) 2 No. 1250 A, 4P EDO, ACB equipped with LSIG protection and Ethernet Enabled for communication and with suitable extension of breaker terminals for connection of Copper busduct with flange. b) 1 Set Surge Arrester (3P+N) + 100A, TPN, MCCB BUS COUPLER SECTION a) 1 No. 1250 A, 4P EDO, ACB equipped with LSIG protection and Ethernet Enabled for communication. OUTGOING SECTION: a) 2 No. 1250 A, 4P EDO, ACB equipped with LSIG protection and Ethernet Enabled for communication. METERING SECTION: a) 1 no. multifunction meter capable of reading various parameters like V,A,F,PF,W,VAR,etc including THD measurement with suitable communication port for BMS connectivity over Modbus RS 485 for all feeders. b) Set of LED based indication lamps for R, Y, B phase. PLC to be provided for changover Scheme All Electrical interlockings shall be provided & Load Management shall be provided.

Addition in Exisitng Main LT Panel 1 INCOMER SECTION: a) 1 No. 1250 A, 4P EDO, ACB equipped with LSIG protection and Ethernet Enabled for communication. b) 1 Set Surge Arrester (3P+N) + 100A, TPN, MCCB BUS COUPLER SECTION a) 1 No. 1250 A, 4P EDO, ACB equipped with LSIG protection and Ethernet Enabled for communication. PLC to be provided for changover Scheme METERING SECTION: a) 1 no. multifunction meter capable of reading various parameters like V,A,F,PF,W,VAR,etc including THD measurement with suitable communication port for BMS connectivity over Modbus RS 485 for all feeders. b) Set of LED based indication lamps for R, Y, B phase. All Electrical interlocking shall be provided

Addition in Exisitng Main LT Panel 2 INCOMER SECTION: a) 1 No. 1250 A, 4P EDO, ACB equipped with LSIG protection and Ethernet Enabled for communication. b) 1 Set Surge Arrester (3P+N) + 100A, TPN, MCCB BUS COUPLER SECTION a) 1 No. 1250 A, 4P EDO, ACB equipped with LSIG protection and Ethernet Enabled for communication. PLC to be provided for changover Scheme METERING SECTION: a) 1 no. multifunction meter capable of reading various parameters like V,A,F,PF,W,VAR,etc including THD measurement with suitable communication port for BMS connectivity over Modbus RS 485 for all feeders. b) Set of LED based indication lamps for R, Y, B phase. c) 1 nNo. 1250A 4P Change over Switch.

Supply & Installation of 1250A Copper (65kA for 1 sec) 4 pole IP 54 bus ducts including bends, T Joints,Expansion Joints, End Flanges, Flexibles, Outdoor Canopy, Adaptor boxes and all special installation material. - Class B Mylar Insulation shall be provided. - The Integral Earth Bus Bar shall be wrap around construction and shall be rated for 50% of Phase Bus Bar. - External Earth Bus bar shall be provided as per the local certifying authorities. - Colour Shade of Bus Bar shall be ANSI 49 Grey. - The Joint Pak shall be provided with Double Headed Bolts in which the head should shear during final tightening. Make list of Bus Bar : - Schneider/Siemens- Sentron/ ABB only

S.I.T.C of Wireless Temperature Sensor [Wireless and self-powered (no auxiliary supply, no battery)] Make list of WTS : - Schneider , Siemens , ABB

S.I.T.C of HMI (for Synchronizing Panel) for Displaying Meter data, ACB Data & Wireless temp sensor data. Make list of HMI : - Schneider , Siemens , ABB

Integration of the above new LT panels with the exsiting IOT Panels including software

Modification of existing 20 nos of MCCB's to motorised long with accessories

EXHAUST ROUTING TO ATMOSPHERE FROM ENGINE Ref. Dwg. No.-PTS-16/750-810/L-E-01 A) Supply and installation of 8" MS ERW, 5mm thick Pipe including bends, flanges & hardware etc with including pollution sampling point. B) Supply and Installation of Insulation for above exhaust pipe with 50 mm thk. Rockwool slab of 100 Kg/ M3 , wrapped with 24 gauge Aluminium sheet C) Supply and installation of MS Support for exhaust pipe & silencer , with one coat of primer and 2 coats of Enamel Paint D) Supply and installation of Insulation for silencer 50mm thk. Rockwool Slab of 100 Kg/ m3 and wrapped with 24 gauge Aluminum sheet

CHAITRA ELECTRICALS AND ENGINEERING

Mak Envirotech & Solutions (I) Pvt Ltd