Proposed Upgradation and Furnishing of Hall and Reception Area Ground Floor at J.C.S.O.I. Club, Ranchi For the Year 2023-24

Amount

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.2.4 Size of Tile 800 x 1200 mm

Providing Fitting & Fixing Toughened glass 12 mm thickness Partition Work all complete job

Providing Glazier for Fixing Toughened glass 12 mm thickness Partition Work all complete job

Providing Beldarr for Fixing Toughened glass 12 mm thickness Partition Work all complete job

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism anddoor weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and Applying Italian Floor Polish Work all complete job as per specification and Direction of E/I.

Supply and instalation of Fire Clay Premium Planter Pots MX 3R 42A (490 MM) All complete job as per specification and Direction of E/I.

Supply and fixing of Artist Painting all complete job as per specification and Direction of E/I.

Supplying fitting & fixing of Curtain with all Accessories (9'-6" Hight)

Providing and Fixing 10mm Wooden Flooring with Engineer Wood all complete job

Providing and Fixing UPVC Some Part Fixed and Some part Openeble Windows all complete job.

Supplying and Fixing 2 Seater Sofa (Model:- OXY Sofa)

Supplying and Fixing Sofa Chair (Single Sofa) (Model:-OXY Sofa)

Supplying and Fixing Reception Chair (Queen)

Supplying and Fixing Coffee Shop Chair (SIAM Wood)

Supplying and Fixing Center Table 30" dia (SC O24)

Supplying and Fixing Center Table 24" dia (SC O24)

Supplying and Fixing Side Table

Supplying and Fixing Coffee Table 24" dia (Gemini Table)

Supplying and Fixing Planter 6 Rft

Supplying and FixingConsole (4'-0"x2'-6") 10 Sft=0.929 M2

Supplying and Fixing Coffee Shop Counter 7'-0" Rft= 0.652 M2

Supplying and Fixing Coffee Shop Back Wall Unit 7'x7'=49 Sft

Supplying and Fixing Reception Back Wall Unit 7'x5'=35 Sft

Supplying and Fixing Veneer Panelling (10'-0"x30'-0" 0=300 Sft

Supplying and Fixing 4" Raised Platform (40'-0"x10'-0")=400 Sft

Providing and Making TV Unit Console 4' lengthx1'-6"=6 Sft

Providing and Making Wooden Fency (Coffee Shop) 2'-6" Height

Supplying and Fittings 9 Watt COB (Havels Make)

Supplying and Fittings Hanging Light

Supply of Hitachi make 3 Ton Cassette AC Air Conditioner (5 Star)

Providing Copper pipe Line

Providing Drain pipe

Wiring for AC 3 core 4mm copper wire

Providing Stand

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES