Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.9 LAccepted-AOC BASGO LEH 194 101 U T LADAKH INDIA | LEH LADAKH | LADAKH | 194101 | L1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L2₹8.4 L+₹52,589.50 (6.64%)Rejected-Finance SHAMSHU COMPLEX FORT ROAD LEH LADAKH 194101 | LEH | LEH | LADAKH | 194101 | L2 | Rejected-Finance Higher side quoted amount | |
| 3 | L3₹9.2 L+₹1.3 L (16.0%)Rejected-Finance | L3 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹22,000
Closing Date
11 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
HQ CWE Khumbathang PIN-900270 C/o 56 APO
SPL REPAIR TO BLDG NO T-92 AND T-93 AT NIMU UNDER AGE (I) NIMU
2024_MES_640828_1
80051/94/E8
Open Tender
Support/Maintenance Service
Item Rate
180 days
AGE (I) NIMU
Class D, Cat a (i)
8 documents required · 8 mandatory
₹500
AGE (I) NIMU
₹22,000
Yes
4 Apr 2024
5 Feb 2024
12 Mar 2024
5 Feb 2024
11 Mar 2024
20 Feb 2024
Amount
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in framed work, complete all as specified and directed by Engr-in-charge.
Plain fillets. exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-charge..
Plain fillets exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one edge or face as in bedding complete all as specified and directed by Engr-in-charge.
Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets, complete all as specified and directed by Engr-in-charge.
Prelaminated particle board 9mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails in ceiling, flat or sloping to timber frame work, complete all as specified and directed by Engr-in-charge.
9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in wall, complete all as specified and directed by Engr-in-charge.
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames), complete all as specified and directed by Engr-in-charge.
2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed by Engr-in-charge.
2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors, complete all as specified and directed by Engr-in-charge.
2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge.
Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed by Engr-in-charge.
Extruded aluminium alloy handles, fabricated type, anodised 150mm long, complete all as specified and directed by Engr-in-charge.
Extruded aluminium alloy handles, fabricated type, anodised 100mm long, complete all as specified and directed by Engr-in-charge.
250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed by the Engr-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified, complete all as specified and directed by Engr-in-charge..
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified, complete all as specified and directed by Engr-in-charge..
Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thick (below or above ground level), complete all as specified and directed by Engr-in-charge
75mm thick cement concrete 1:2:4, type B- 2 (40mm graded crushed stone aggregate aggregate) as in plinth protection finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge
4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed by Engr-in-charge.
5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, complete all as specified and directed by Engr-in-charge.
Preparation of new wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of Synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and directed by Engr-in-charge.
Preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of Synthetic enamel paint (ordinary tint), complete all as specified and directed by Engr-in-charge
Taking down carefully aluminium point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with MS conduit and wooden battern, complete all as specified and directed by Engr-in-charge
Point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc for One light point/one fan point controlled by one switch, complete all as specified and directed by Engr-in-charge
Point wiring with PVC insulated single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc for One 3 pin 5 amps socket outlet independent, complete all as specified and directed by Engr-in-charge
All same as per item No 24 above but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable, complete all as specified and directed by Engr-in-Charge.
Switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal, complete all as specified and directed by Engr-in-Charge.
Switch socket combination 2 in 1, 3 pin, 5 Amp flush type, complete all as specified and directed by Engr-in-Charge.
Switch piano, flush type single pole, one way 5 Amp, complete all as specified and directed by Engr-in-Charge.
Ceiling rose surface Bakelite 65x50mm two to three terminal, complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories, complete all as per specified and as directed by Engr-in-Charge.
Supply and fix in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as per specified and as directed by Engr-in-Charge.
Supply and fix in repair sheet metal powder coated versatile double door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz, complete all as per specified and as directed by Engr-in-Charge.
Supply and fix in repair for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards, complete all as per specified and as directed by Engr-in-Charge.
Supply and fix in repairs to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards, complete all as per specified and as directed by Engr-in-Charge.
Supply and fixing in repair 1100 Volts grade heavy duty cable PVC insulated aluminimum conductor of size 16 Sq mm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, flat or circular, complete all as per specified and as directed by Engr-in-Charge.
Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result, complete all as per specified and as directed by Engr-in-Charge.
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 18,400.00and any other reduction if any from quoted amount.
M/S INDUS HIMALAYAN EXPLORERS
CHHIRPON BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .