Construction of Check Dam Across Halla Near SC lands in Hiregowja and Kunnalu village, Lakya Hobli, Chikkamagaluru Taluk, Chikkamagaluru District.

Construction of Check Dam Across Halla Near SC lands in Hiregowja and Kunnalu village, Lakya Hobli, Chikkamagaluru Taluk, Chikkamagaluru District.

CSR 2023-24 Vol.3 PNo.09Item No.2.5(ii)a Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ... 479.60 100 Sqm

CSR 2023-24 Vol.4 PNo.101 Item No.8.2.1 Cutting and removing jauliflora bushes upto 1.50 m girth excluding removal of stumps and including burning or disposing off the materials as directed with all other ancillary operations complete. ----... 1410.00 Each

CSR 2023-24 Vol-1,P.No.8 I.No.1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li... 2634.33 Cum

CSR 2023-24,Vol-4,P-2, I No.1.8,P.no-130 Providing rubble stone/boulder filling between or behind abutment below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and complet... 342.69 Cum

CSR 2023-24,Vol-4, Part-1,I.No.2.13, P.No.39 Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ... 267.48 Cum

CSR 2023-24,Vol -4, Part II PNo.130 INo.1.12 Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per r... 2181.04 Cum

CSR 2023-24,Vol-1,I.No.2.11(h), P.No.18 Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we... 28.85 t

CSR 2023-24,Vol -4, Part II PNo.129 INo.1.2 Providing impervious filling adjacent to masonry / concrete structure and filling trial pits with soil available in adjacent area in layers of 100 to 150 mm and compacting each layer to density contro... 514.44 Cum

CSR 2023-24 V-4 Part-2, P.No. 140 I.No.3.12 De-silting of Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle ( excluding cost of transportation ) including cost of all machin... 9832.50 Cum

CSR 2023-24 V-4 Part-2, P.No. 139 I.No.3.7 Providing new embankment abutting to existing bund to strength the existing bund using soil from approved borrow area in layers of 200 to 250 mm and compacting each layer to density control of not les... 5270.00 Cum

CSR 2023-24 V-4 Part-2, P.No. 129 I.No.1.6 Providing and constructing 450 mm thick hand packed rough stone revetment consisting of 300 mm thick rough stones with 400 to 450 mm long through stones at 1.5 m c / c over a backing of 150 mm thick 4... 1584.00 Sqm

WRD 2021-22 Vol-IV 6.18, Page 77 Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting brackets,... 1.32 t

WRD 2021-22 Vol-IV 6.21, Page 78 Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wall plates, seal seats, first stage anchors, anchor girders, anchor bars, trunnion supports etc., wi... 0.56 t

CSR 2023-24SR Item No.12.1, P- 117 of Vol-3 Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar... 57.60 m