Implementation of Sadbhawana Mission (Renovation and Refurbishment of Blocks of Janata Bhawan at Dispur), Electrical works

Amount

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying including laying of 1 core 630 Sq.mm heat resisting XLPE aluminum armoured Cables for working voltage upto and including 1100 Volts as per IS 7098 part 1 to be laid through direct in ground as specified and directed by the Department.(GLOSTER/POLYCAB/FINOLEX or equivalent make)(Make APDCL Approved or equivalent as approved by this department) (considering 100 Mtrs.of Length)

Supplying including laying of 3.5 core 300 Sq.mm heat resisting XLPE aluminum armoured Cables for working voltage upto and including 1100 Volts as per IS 7098 part 1 to be laid through direct in ground as specified and directed by the Department.(GLOSTER/POLYCAB/FINOLEX or equivalent make)(Make APDCL Approved or equivalent as approved by this department) (considering 100 Mtrs.of Length)

Supplying and fitting fixing of Aluminum Lugs 630 Sq.mm as required and as directed by the department.(Make APDCL Approved or equivalent as approved by this department)

Supplying and fitting fixing of Aluminum Lugs 300 Sq.mm as required and as directed by the department.(Make APDCL Approved or equivalent as approved by this department)

Supplying with fitting fixing 630 Sq.mm.1 Core Aluminium Alloy Crimping Heat Shrink Termination Kit as per IS-60840 as specified and directed by the Department.(GEM PRODUCT ID 5116877-69667311315) (RAYCHEM/DENSONS or equivalent make)

Supplying with fitting fixing 300 Sq.mm.1 Core Aluminium Alloy Crimping Heat Shrink Termination Kit as per IS-60840 as specified and directed by the Department.(GEM PRODUCT ID 5116877-67483845685) (RAYCHEM/DENSONS or equivalent make)

Supplying including installation, testing and commissioning of Radiator Cooled AMF Panel Controlled 1010KVA KOEL GREEN ELECTRO Power Generator set coupled to suitable alternator complete with all accessories as specified and directed by the department conforming to IS comprising the following Technical Specification. 1)Nominal Rated Capacity = 1010 KVA 2) Rated Engine Power(KWm)= 100% of the required power at STP. 3) Engine Capacity = 31860 CC 4) Type of Cooling =Radiator Cooled. 5) Type of Governor = Electronic-Isochronous. 6) No.of Cylinders/Strokes = 12/4 7) Nature of fuel = HSD 8) Salient Features of Engine = Turbo Charged Engine,Direct injection Fuel System 9) Starting System = 24 Volt Dc Electrical 10) Alternator Voltage Rating = 415 Volt 11) Power Factor of AC generator = 0.8 12) Efficiency at rated Power factor at 75% of full Load = 95.5 percent 13) Type of alternator = Brushless 14) Alternator IP Rating = IP 23 15) Acoustic Enclosure (inclusive in the scope of supply) = With Acoustic Enclosure 16) Thickness of insulation = 100 millimeter 17) Noise level at 1 meter (dB) = 85 18) Fuel Tank Capacity = 990 liter 19) Battery Type & Specification = Normal lead acid to IS: 7372 for motor vehicles. 20) Battery capacity (Ah)/No.of Batteries =180/2 21) Salient Features of Acoustic Enclosure = Glass window on Accoustic Enclosure in front of the Control Panel,Emergency Stop outside the Accoustic Enclosure

Making of Micro Tunneling and laying of 110 mm HDPE Pipe as directed by the department.

Supplying of HDPE Pipe ,PE-100,PN-08,DN-110 mm in existing micro tunnel as required and as directed by the department.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm +2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1or 2 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A,30KA,FPMCCB

Supplying and installation of 1200 mm Service value including parts and accessories Electric Ceiling type fan as per IS 374 as specified and directed by the Department.(GEM PRODUCT ID 5116877-27701688893) (ORIENT/CROMPTON or equivalent make)

Supplying and installation of 22 W 6500K LED Tube Light in the wall or Ceiling as specified and directed by the department.(GEM PRODUCT ID 5116877-54514503502) (BAJAJ/ CROMPTON/HALONIX or equivalent make)

Supplying including laying of Home Power Generation and Distribution Machinery and Accessories Electrical Wire and cable and harness Electrical Cable and accessories.XLPE Cable for upto and including 1.1 KV, 25 Sq.mm 3.5 Core aluminium Armoured Power Cable for Direct Burial UGAC Cable IS:7098 (Part - I) as specified and directed by the Department.(GEM PRODUCT ID 5116877-11356317486) (POLYCAB/KEI/FINOLEX or equivalent make)

Supplying installation, testing and commissioning of Passenger Elevator KONE make for G + 1,2 Stops (540 Kg) 8 persons, auto door,machine room less type having contract speed of 1.0 Metre Per Sec(Approx.) Serving different floor in the existing lift shaft including dismantling and scaffolding work as per detailed specifications as under including annual maintenance upto fifth year after SITC. Elevator Type - Passenger Elevator PWI 08/10-19 Product - 1 Monospace Load & Capacity - 540 Kg or 8 Persons Speed - 1.0 Metre/Sec (approx.) Stops & Opening - 2 Stops & 2 openings.Sigle entrance car. Travel Height - 20.4 m Elevator grouping - Simplex.Full Collective Control. Well Dimension - 2300 mm width and 1900 mm depth (Required) Head Room Height - 4300mm (Required) Pit hieght - 1600 mm(Required) MAP Floor Position - Topmost floor(TOP) Car Dimension - 1300 mm wide x 1350 mm deep x 2200 mm height Door Dimension - 900 mm wide x 2000 mm height Door type - Two Panel Centre Opening plain panel with small vision panel. Car design - Stainless Steel - Silver brushed. Car Panel finish - Stainless Steel -Hairline AISI441. Hand rail - Round bend handrailstainless steel at rear wall.Ceiling & Lighting- Integrated Roof LS4 Stainless Steel Ring Lighting LED Car operating panel - 1 Full Height stainless Steel Face plate Square Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Landing signalization - Stailess Steel 7 segments display Flush mounted Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Other Features - Car emergency light,Fireman drive,Curtain of light 169 Beams, Accurate Relevelling, automatic clossed door, Emergency Rescue Device ,2 way dedicated Intercom, attendent service,lift announcer,ring lighting LED , 2 side handrails inside car.

Supplying installation, testing and commissioning of Passenger Elevator KONE make for G + 4,5 Stops (680 Kg) 10 persons, auto door,machine room less type having contract speed of 1.0 Metre Per Sec(Approx.) Serving different floor in the existing lift shaft including dismantling and scaffolding work as per detailed specifications as under including annual maintenance upto fifth year after SITC. Product - 1 Monospace No.of Units - 1 Load & Capacity - 680 Kg or 10 Persons Speed - 1.0 Metre/Sec (approx.) Stops & Opening - 5 Stops & 5 openings.Sigle entrance car. Travel Height - 20.4 m Elevator grouping - Simplex.Full Collective Control. Well Dimension - 2300 mm width and 1900 mm depth (Required) Head Room Height - 4300mm (Required) Pit hieght - 1600 mm(Required) MAP Floor Position - Topmost floor(TOP) Car Dimension - 1300 mm wide x 1350 mm deep x 2200 mm height Door type - Two Panel Centre Opening plain panel with small vision panel. Car design - Stainless Steel - Silver brushed. Car Panel finish - Stainless Steel -Hairline AISI441. Hand rail - Round bend handrailstainless steel at rear wall. Ceiling & Lighting- Integrated Roof LS4 Stainless Steel Ring Lighting LED Flooring - 20 mm Car Skirting Material:Stainless Steel Hairline AISI441 Car door finish - Stainless Steel - Hairline AISI441 Landing door finish - Stainless Steel - Hairline AISI441. Car operating panel - 1 Full Height stainless Steel Face plate Square Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Landing signalization - Stailess Steel 7 segments display Flush mounted Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Other Features - Car emergency light,Fireman drive,Curtain of light 169 Beams, Accurate Relevelling, automatic clossed door, Emergency Rescue Device ,2 way dedicated Intercom, attendent service,lift announcer,ring lighting LED , 2 side handrails inside car.

Supplying installation, testing and commissioning of Passenger Elevator KONE make for G + 3,4 Stops (680 Kg) 10 persons, auto door,machine room less type having contract speed of 1.0 Metre Per Sec(Approx.) Serving different floor in the existing lift shaft including dismantling and scaffolding work as per detailed specifications as under including annual maintenance upto fifth year after SITC. Product - 1 Monospace Load & Capacity - 680 Kg or 10 Persons Speed - 1.0 Metre/Sec (approx.) Stops & Opening - 4 Stops & 4 openings.Sigle entrance car. Travel Height - 20.4 m Elevator grouping - Simplex.Full Collective Control. Well Dimension - 2300 mm width and 1900 mm depth (Required) Head Room Height - 4300mm (Required) MAP Floor Position - Topmost floor(TOP) Pit hieght - 1600 mm(Required) Car Dimension - 1300 mm wide x 1350 mm deep x 2200 mm height Door type - Two Panel Centre Opening plain panel with small vision panel. Car design - Stainless Steel - Silver brushed. Car Panel finish - Stainless Steel -Hairline AISI441. Hand rail - Round bend handrailstainless steel at rear wall. Ceiling & Lighting- Integrated Roof LS4 Stainless Steel Ring Lighting LED Flooring - 20 mm Car Skirting Material:Stainless Steel Hairline AISI441 Car door finish - Stainless Steel - Hairline AISI441 Landing door finish - Stainless Steel - Hairline AISI441. Car operating panel - 1 Full Height stainless Steel Face plate Square Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Landing signalization - Stailess Steel 7 segments display Flush mounted Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Other Features - Car emergency light,Fireman drive,Curtain of light 169 Beams, Accurate Relevelling, automatic clossed door, Emergency Rescue Device ,2 way dedicated Intercom, attendent service,lift announcer,ring lighting LED , 2 side handrails inside car.

Supplying installation, testing and commissioning of Passenger Elevator KONE make for G + 4,5 Stops (1020 Kg) 15 persons, auto door,machine room less type having contract speed of 1.0 Metre Per Sec(Approx.) Serving different floor in the existing lift shaft including dismantling and scaffolding work as per detailed specifications as under including annual maintenance upto fifth year after SITC. Elevator Type - Passenger Elevator PWI 15/10-19 Product - 1 Monospace Load & Capacity - 1020 Kg or 15 Persons Speed - 1.0 Metre/Sec (approx.) Stops & Opening - 5 Stops & 5 openings.Sigle entrance car. Travel Height - 20.4 m Elevator grouping - Simplex.Full Collective Control. Well Dimension - 2300 mm width and 1900 mm depth (Required) Head Room Height - 4300mm (Required) Pit hieght - 1600 mm(Required) MAP Floor Position - Topmost floor(TOP) Car Dimension - 1300 mm wide x 1350 mm deep x 2200 mm height Door type - Two Panel Centre Opening plain panel with small vision panel. Car design - Stainless Steel - Silver brushed. Car Panel finish - Stainless Steel -Hairline AISI441. Hand rail - Round bend handrailstainless steel at rear wall. Ceiling & Lighting- Integrated Roof LS4 Stainless Steel Ring Lighting LED Flooring - 20 mm Car Skirting Material:Stainless Steel Hairline AISI441 Car door finish - Stainless Steel - Hairline AISI441 Landing door finish - Stainless Steel - Hairline AISI441. Car operating panel - 1 Full Height stainless Steel Face plate Square Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Other Features - Car emergency light,Fireman drive,Curtain of light 169 Beams, Accurate Relevelling, automatic clossed door, Emergency Rescue Device ,2 way dedicated Intercom, attendent service,lift announcer,ring lighting LED , 2 side handrails inside car.

Supplying installation, testing and commissioning of Passenger Elevator KONE make for G + 3,4 Stops (1020 Kg) 15 persons, auto door,machine room less type having contract speed of 1.0 Metre Per Sec(Approx.) Serving different floor in the existing lift shaft including dismantling and scaffolding work as per detailed specifications as under including annual maintenance upto fifth year after SITC. Product - 1 Monospace Load & Capacity - 1020 Kg or 15 Persons Speed - 1.0 Metre/Sec (approx.) Stops & Opening - 4 Stops & 4 openings.Sigle entrance car. Travel Height - 20.4 m Elevator grouping - Simplex.Full Collective Control. Well Dimension - 2300 mm width and 1900 mm depth (Required) Head Room Height - 4300mm (Required) Pit hieght - 1600 mm(Required) MAP Floor Position - Topmost floor(TOP) Car Dimension - 1300 mm wide x 1350 mm deep x 2200 mm height Door type - Two Panel Centre Opening plain panel with small vision panel.Car design - Stainless Steel - Silver brushed. Car Panel finish - Stainless Steel -Hairline AISI441. Hand rail - Round bend handrailstainless steel at rear wall.Ceiling & Lighting- Integrated Roof LS4 Stainless Steel Ring Lighting LED Flooring - 20 mm Car Skirting Material:Stainless Steel Hairline AISI441 Landing door finish - Stainless Steel - Hairline AISI441. Car operating panel - 1 Full Height stainless Steel Face plate Square Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Landing signalization - Stailess Steel 7 segments display Flush mounted Silver brushed StSt Segmented LCD Display Square Surface Mounted Buttons with braille KDS90. Other Features - Car emergency light,Fireman drive,Curtain of light 169 Beams, Accurate Relevelling, automatic clossed door, Emergency Rescue Device ,2 way dedicated Intercom, attendent service,lift announcer,ring lighting LED , 2 side handrails inside car.

Supplying including laying of 1 core 240 Sq.mm heat resisting XLPE aluminum armoured Cables for working voltage upto and including 11000 Volts as per IS 7098 part 1 to be laid through direct in ground as specified and directed by the Department.(GLOSTER/POLYCAB/FINOLEX or equivalent make)(Make APDCL Approved or equivalent as approved by this department) (considering 100 Mtrs.of Length)

Supplying and fitting fixing Bi metalic Lugs 240 Sq.mm as required and as directed by the department.(Make APDCL Approved or equivalent as approved by this department)

Supplying and fitting fixing Termination Kit for 11 KV 1C X 240 Sq mm Conductor as required and as directed by the department.(Make APDCL Approved or equivalent as approved by this department)

Payment for bulk supply to be made to the APDCL as Load Security by the conrtractor at per Kilowatt basis for intial 800(Eight Hundred) Kilowatt of Load to be drawn including contractor profit and GST following the latest norms of APDCL.

Design, engineering, manufacturing, testing and supply of Outdoor type 11KV, 1000 KVA Compact Sub-station (CSS) suitable for 11kV, 50Hz, with HT Switchgear, Transformer and LT Switchgear, Cable termination facility for HT & LT side, internal illumination, earthing, interconnection of Transformer with HT & LT equipments, suitable for ready Plinth and comprising of the following. STRUCTURE:- Outdoor type enclosure having modular construction of 1.6/2 mm GI sheet steel. The enclosure shall have IP54 degree of protection for HT & LT compartment & IP23 degree of protection for Transformer compartment. The enclosure exterior shall be painted with Pure Polyester based powder coated paint (colour RAL 7032). The bottom base frame shall be welded and black painted Channel structure with lifting arrangement for the completely assembled CSS. Each Compartment is provided with door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for each compartment. HT SECTION:- SF6 gas insulated Compact VCB: Sheet steel enclosed, free standing, indoor mounted, 11 kV, 630A, 21kA/3s, 3-WAY Non - extensible RMU, consisting of 2Nos. Load Break Switch (Motorised operated) and 1No. Fixed VCB (Motorised charging & closing) in series with LBS between VCB and Transformer, mechanical ON/OFF indicator, trip coil , Manual Close & Trip PB, live cable indicator, mechanical interlocks, pad locking facility, SF6 gas manometer, cable boots, CTs ratio: 60/1+1A, 2.5VA/2.5VA, CL: 1.0/5P10.Self Powered Relay 3O/C + 1E/F ( 50,50N,51,51N) Numerical Relay.Air Insulating Metering Unit .FIX type PTs ratio: 11kV/?3 / 110/?3, CL: 1.0, 100VA.FIX type PTs ratio: 11kV/?3 / 110/?3, CL: 1.0, 100VA.Digital Multifunction Meter, CL:1.0, type Elite-442/EM6436H .Indicating Lamps: R, Y, B, ON, OFF, TRIP .Battery & Battery Charger Cable connection arrangement from outgoing of HT section to primary of Transformer by 11kV (E) XLPE armoured 1C x 95sq.mm. alumminium cable per phase along along with heat shrink cable kit. Incomming supply Cable, termination lits, lugs , glands etc required for Cable termination shall not from part of our scope.. Transformer Section:- 1000KVA , 11KV/0.433KV DYn11 Cast resin Dry type transformer with TAP Links having tapping range of +5% to -5% in steps of 2.5%, Z% : 4% (IST) with max loss @50% loading at 120°C (AN) 4.50kW and max loss @100% loading at 120°C (AN) 12.00kW, Class F insulation , temp rise : 90 DegC , 3nos. Surge arrestors 9kV 10kA polymeric make Asiatic make/ Eq, 1 no. Digital WTI with Alarm & Trip contacts. LT SECTION:- Aluminium PVC sleeved Busbar from transformer Secondary to LT Section (100% for phase & 50% for N, Current density - 1A/ sq mm). Incomer: ACB, 1600A, MF, 4P, 50KA, with mp based release.Tape wound LT CT ratio: 1600/5A, 15VA, Cl-1.0.Digital Multifunction Meter, EM6436H, Cl-1.0 with RS485 Port.Indicating Lamps for R, Y, B, ON, OFF, TRIP.Outgoing : ACB, 1600A, MF, 4P, 50KA, with mp based release .ACB, 1000A, MF, 4P, 50KA, with mp based release.400 kVAR APFC Panel comprising: (100kVARX1 + 50kVARX2 + 25kVARX7 + 10kVARX2 + 5kVARX1) MPP Type Capacitor with 1 no, 800A TP, TMD, 50kA MCCB, 14 stage APFC Relay with suitable Capacitor duty contactors (L&T), ON/OFF Push buttons, ON/OFF indication Lamps, A/M Switch, APFC CT. Bottom Cable termination arrangement of adequate size and qty for outgoing LT cable termination. Cable, lugs , glands etc required for Cable termination shall not from part of our scope..EARTH Busbar Aluminiumn size 50 x 6 sq mmMisc item - Lugs, Terminals, Heaters, CFL, Sleeve,insulator .Hardware ,locks,handle,gasket, tie rods and other boughtout itmes.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying cement concrete in retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers,abutments, pillars, posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor etc., up to floor five level, excluding the cost of centering,shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand),including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge).. Granite stone of any colour and shade

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete.

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). 0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.

SHREE GAUTAM CONSTRUCTION CO. LTD.