GE (W)/HSR-48/2024-25 SPL REPAIR TO BLDG NO P-631 AND MR-1 ROOM

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

Taking down chowkats or frame without taking off shutters(with or without glazing and ventilator) not exc 1.5 Sqm each complete all as specified and directed.

Providing and fixing factory made 100% solid WPC (wood polymer composite)- door frame of size 75mmx50mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified and directed.

Providing and fixing 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed.

S&F Providing and fixing anodised Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, sliding windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate any sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Necessary fittings like lugs, hinges, cleats, rollers, handles, locking arrangement, glazings clips, rollers for sliding and rubber beadings shall deemed to be included in quoted rate and shall not be measured and paid seperately.

S&F Anodised aluminium powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, handle 2 Nos in each door,anodised alumnium snap beading, screws etc, complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Necessary fittings like lugs, hinges, cleats, rollers, handles, locking arrangement, glazings clips, and rubber beadings shall deemed to be included in quoted rate and shall not be measured and paid seperately.

S&F for 5.5 mm thick dark coloured glass for doors Iincluding black film for making glass opaque and windows/ frosted dark coloured glass for ventilators in aluminium door windows and ventilators partitions including ped/gasket complete all as specified and directed.

S&F for 5.5 mm thick ACP Sheet for doors for partition in aluminium door windows and ventilators partitions including ped/gasket complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to powder coated windows and doors complete all as specified and directed.

S&F powder coated aluminium deco grill fixed to powder coated windows and doors complete all as specified and directed.

M&L Aluminium die cast body door closer hydraulically regulated,designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F for Aluminium Motrice lock 4 levers, vertical type 75mm size for aluminium doors complete all as specified and directed.

S&F 150 mm extruded Aluminium handles, cast type,anodised complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S&F butt hinges 100mm, medium weight complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified and directed.

S&F PVC 5mm thick solid PVC of width 30cm pane of louvers shape of wall lining/panelling of wood grain printed colour on one side and inclusive of solvent cement and fixing at site inclusive of framework as required and as per specifications and drawing complete all as specified and directed.

S&F 10 mm calcium silicate Pin holed sound absorbing ceiling tiles made of silicareous and Calcerous material reinforced with cellulose fibre and (ARMSTRONG) of size 600x600mm including of frame work to receive tiles of GI T-section 24x38 mm & angle section 24x24mm including hanging MS flat of size 30mmx4mm thick length to be provided as site requirement, grid at 1mx1m at alternate joints in both the direction and complete all as specified and directed.

M&L 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone including rubbing & polishing complete all as specified and directed.

M&L for coloured Non skid matte finish ceramic tiles 7 to 8mm thick , area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 including dismantling of existing floor hearth or wall tiling complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface in light and dark shade combination set and jointed in neat cement slurry,over and including 10mm thick baking coat in CM 1:3 including dismantling of existing floor hearth or wall tiling complete all as specified and directed.

M&L for coloured vitrified tiles 10mm thick (square/ rectangular) of size 600mm x 1200 mm in floors etc set & including 15mm thick screed bed in cement mortar 1:6 including dismantling of existing floor hearth or wall tiling complete all as specified and directed.

Description all as per item No 23.00 above but in skirting over and including 10mm thick cement plaster 1:4 including dismantling of existing floor hearth or wall tiling complete all as specified and directed.

M&L steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe including taking down of pipe complete all as specified and directed.

M&L steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20mm bore of pipe including taking down of pipe complete all as specified and directed.

S&F in repair vitreous china one piece WC with 10 ltrs capacity flushing cistern floor mounting frame, installation kit, drain pipe connection set, including necessary cutting to wall / floor making good complete all as specified and directed.

S&F in repair bib taps chromium plated caste copper alloy screwed down high pressure 15mm bore fixed to pipe complete all as specified and directed.

S&F in repair vitreous china counter top wash hand basin (Size 560x455x200mm) colour brilliant / off white including waste pipe and waste coupling over and size complete all as specified and directed.

S&F and repairs in 15mm bore angle valve, stop valve, cast copper alloy screwed down, for high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed (concealed type) complete all as specified and directed.

S&F in repair CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair corner glass shelf 300mm (with brass brackets) along with CP railing complete all as specified and directed.

S&F in repair for CP toilet roll holder fixed to wall with chromium plated brass screw complete all as specified and directed.

S&F in repair Health Faucet with hose & hook complete all as specified and directed.

S & F in repair brass chromium plated tubular Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed.

S&F brass CP basin mixer for mixing hot &cold water screwd down for iron pipe and fixed in repair complete all as specified and directed.

S&F in repair PVC connections in repair 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F Looking mirror minimum thickness of 6 mm of size as per requirement and including fixing with proper fastener on walls in toilets walls complete all as specified and directed.

S&F Rotational moulded polythylene water storage tank tripple layer in white colour of capacity 1000 lts (Cylindrical, Vertical with closed top) in position with 20mm float ball in repairs including dismantling of the old unserviceable water tank complete all as specified and directed.

S&F Rotational moulded polythylene water storage tank tripple layer in white colour of capacity 500 lts (Cylindrical, Vertical with closed top) in position with 20mm float ball in repairs including dismantling of the old unserviceable water tank complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI pipe and connecting with tanks with all fittings complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls fixed in repair complete all as specified and directed.

S&F 110mm dia PVC bend any radius including benching of bends provided at ground surface in PCC 1:3:6 and complete all as spd and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps fixed in repair complete all as specified and directed.

S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.

S&F, PVC Nahani trap 75mm bore with grating including jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as directed.

Supply and fixed vitreous china urinal, half stall type white (including flushing cistern, flush pipe and waste pipe and partition for the same) complete all as specified and directed.

Demoliton of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing debries out of MD land as directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M& L for 50mm thick PCC 1:3:6 type C-2 (Using 20mm gradede crushed stone aggregate ) as in plinth protection including mastic filling in joints complete all as specified and directed.

Demolition of reinforced cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, water tanks chajjas and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed.

Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using Product : Rustoff-100 of Sika or equivalent make in Fosroc / Thermax as approved by GE, with density : 1.01 Kg/ltr at 30°C and consumption : 0.2 kg/Sqm/coat complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar.

Supply and apply cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and product requirements: carbonation resistance : 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N/Sqmm according to ASTM C 882-78 complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar.

M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.

M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding upto 10mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.

M&L, 15mm thick rendering upto three storeys in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth w/o using extra cement complete all as specified and directed.

Description all as per item No 61.00 above item but 10mm thick in CM 1:3 as in ceiling, Chajjah, facia and complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 over brick / concrete wall surfaces trowelled to even & smooth without using extra cement for externall wall surfaces upto three storey Bldgs mixed with WPC as per manufacturer instruction complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of OBD using roller over two coat of 1mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surface of walls and applying two coats of weather proof paint using roller of .make : weather coat of Berger / apex utima of Asian paints / Xtrapremium of Shalimar , over and including of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture complete all as specified and directed. NOTE: The work under this item shall be carried out by the contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of four years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be returned only after completion of guarantee.

M & L for complete removal of existing treatment of old surface ofany layer of wall and applying two coats of OBD using roller of make: Shalimar/Asian Paints over two coat of 1mm thick wall care putty of same make on wall complete all as specified and directed.

M&L for preparing old plastered or unplastered surface of walls with and including complete removal of existing treatment of any layer of wall and applying two coats of weather proof paint using roller of .make : apex utima of Asian paints / Xtrapremium of Shalimar , over and including of a coat of exterior wall primer over two coat acryllic wall care putty as aprproved by Manufacture complete all as specified and directed. NOTE: The work under this item shall be carried out by the contractor from authorised applicator of manufacturer. The contractor shall also stand for guarantee of the quality and finish of work under this item for period for a period of three years from certified date of completion of complete work for which an amount Rs 20/Sqm of quantity of work done under this item shall be retained in final bill.This amount shall be returned only after completion of guarantee.

M&L for preparation of old surface of ceilings including pillars etc (plastered or unplastered) by scrapping down smoke spot moulds, moss and efflorescenet salt and treatin oil and greasy spots and applying Two coat of white wash complete all as specified and directed.

S&F prepainted galvalume alumimium zinc coating GI based plain steel sheet 0.50 mm thick of any color having tensile strength of 550 MPA as a roof covering /Cladding to wall and in Chajjah , Fixed with self tapping screw complete all as specified and directed.

S&F mild steel joist ,channel ,angle ,tee fixed independently without connection plates etc (cut to ordinary length i.e. within 20mm of the length indicated ) complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 10mm thick in cement mortar 1:3 and finishing even and smooth on roof surfaces complete all as specified and directed.

M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weighing not less than 3.50Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence) laid by torch application method of overlap 100 on length and 100mm on the width side as per manufacture's instructions over a coat of hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete and applying two coats of aluminium paint over APP membrane complete all as specified and directed.

S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including Dismantling wrought iron or mild steel work complete all as specified and directed.

M&L Exposed metal frame ceilings with 10 mm thick calcium silicate board of silicious and calcerious material reinforced with cellulose fibre for fixing in 600 x 600 mm grid complete all as specified and directed. Note : Frame work for ceiling shall deemed to be included in quoted rate.

S&F windows roller blind made of several horizontal slats of fibre cloth (wooden textured) along a roller and inclusive of all connected items and all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed.

Description all as per item No 78.00 but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on indep board complete all as specified and directed.

Description all as per item No 78.00 but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 78.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F modular fan step regulator 120W-2 module suiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 32Amps,B-curve type, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, B-curve type, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

Supply & fixing in replacement LED light 36/42 watt Surface Mounting/ Recess mounting light, 3 way mounting arrangement (Surface mounted, 2x2) Sheet aluminium housing with high quality LGP and PMMA diffuser. Separate HPF driver 240 volt alongwith fixing arrangements complete all as specified and directed. Note : Colour of light as per direction of Engr-in-Charge.

Supply & fixing sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amp rating 240 Volt complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion, complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

M&L for providing/cutting the round/ square hole of required size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing exhaust Fan plastic body 200/250 Sqmm with plastic louver complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall ) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor complete all as specified and directed.

Shiva Constructin Co. (BID ID -3135183)

m/s krishna engineers1 (BID ID -3135580)

Siya constructions (BID ID -3135325)

B B BUILDERS (BID ID -3135778)