Renovation work of the lipik office at the Nagar Palika Bilhaur Office

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster Including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying in cement concrete 1.5:10 (Icement: 5 coarse sand 10 graded stone aggregate 40mm

12mm Plaster in 1:4 cement coarse sand mortar including all material, labour T&P, curing etc complete

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of 5 neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (40 mm thick floor

Providing and laying matt finished vitrified tile of size 300x300x9.8nun having with water absorption less than 0.5% and conforming to 15: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade two or more 7 coats applied 1.43 Itr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Mild steel or iron work of small sizes and sections such as holding down bolts,hold fast tierods.gratings etc. when not Included in an over all rates) wrought to required from including supply of steel and its 8 wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing, Grill

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick

Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).