Providing Electric Poles and Electric Lights from behind Mahalingeshwar temple to Dhobhi ghat and from Kalpad Hanuman temple to Mallanagouda Patil home and in Mallamma nagar ( SFC 2022-23 Saving amount)

Providing Electric Poles and Electric Lights from behind Mahalingeshwar temple to Dhobhi ghat and from Kalpad Hanuman temple to Mallanagouda Patil home and in Mallamma nagar ( SFC 2022-23 Saving amount)

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

Decorative light poles Fabricating and supply ing and erection of of 9mtrs long hot dip galvanised conical pole with BSEN 10025 grade S 355 JO steel plate for shaft IS 2052 for base plate with door op...

Supply of LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with ...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm Long Barrel (Pg. No. 43, SI No. 6.17.6)

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm (Pg. No. 43, SI No. 6.17.2)

Supply and laying double walled corrugated HDPE Pipe including all necessary connecting Sockets / Couplings / Tees / Bends/End -caps of same materials in existing trench as per IS 14930 part -II suit...

Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. 40mm (P...

Supplying of 1.1 KV LT UG cableXLPE or Heat resistant PVC insulated, PVC extruded, innear sheathed, armoured UG LT cable, as per IS 1554 (Part-1 ) or IS -7098 Part-1,Armouring Strip thickness in aver...

Supplying & drawing Flexible Multicore Cable Manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 - 1984 and (Virgin) PVC insulation sheathed suitable for wor...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers etc. (SR 2023-24 Pg. No. 21, SI No. 5.48)

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40Amp...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63Amps(Page No.24 Item No 5.7.3PWD ELE Belgaum Circle SR 2019-20)

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

Fixing halogen/metal hallide/SVL/IL/ LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (SR 2023-24 Pg. No. 56, SI No. 13....

Supplying and running GI/Copper Conductor for grounding and (along with other wires in conduits system of wiring), using necessary suitable size clamps nails guttas,/ spacers etc 8SWG GI Wire. (P No ...

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS 694 & confirming ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete. (As per Civil SR KSRB I-2, P-7) In soil (ordinary) (SR 2019-20 ...

S & F L.T Cast Iron pot head

Auto manual switch (Market Rate)

Labour charges for Cable etc..( SR 2019-20 P No 41 I No 6.5.1)

SupplyingandFixingof........mmdiaclassAGIpipebracketupto2mslongbentatsuitableangleandfixingtothisbracketstreetlightfittingofallcapacitiestoGIorGIorrailorRCpole/wallusingsuitableclamps,bolts,andnutsand...

Supplyof LED Streetlight 25W luminairewithpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonatematerialdeli...