Construction of Late Sudhakar Waman Chavan Multipurpose Building at Shivai Nagar TMC School No.47 Reserved Plot in Ward No. 5 of Thane municipal Corporation

Amount

Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed, dewaterin, preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete. ( Spec.No. : Bd.A.1Page no 259/ CSR Page No.150

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means

Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stackingitin measurable heaps within a distance of 50metres from the building area including dewatering and backfilling with available earth/murum,watering,ramming,etc.complete. (Lift upto 1.5m) By Mechanical Means

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering complete. (Spec. No. : As directed by Engineer-in-charge /Page No. 154)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite / quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying /pumping cover blocks,compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layersincluding watering and compacting etc. complete.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 Ground Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 1st Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 2nd Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 3rd Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 4th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 5th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 6th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 7th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 8th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 9th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.12 Terrace floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap /granite /quartzite /gneiss metal for R.C.C. beams and as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying /pumping, compaction and roughening the surface if special finishish to be provided and curing etc. complete. (Excluding reinforcement and structural steel). withfully automatic microprocessor based PLC with SCADA enable dreversible Drum Type mixer /concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 24 Plinth Beam

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 25 Ground Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 26 1st Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 27 2nd Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 28 3rd Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 29 4th Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 30 5th Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 31 6th Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 32 7th Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 33 8th Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 34 9th Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 35 Terrace Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 36 Lift machine room

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 as per Itme No. 37 Staircase room

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 1st Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 2nd Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 3rd Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 4th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 5th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 6th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 7th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 8th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 9th Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 terrace Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 Lift machine room

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 staircase terrace slab

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 underground Reservior

Providing and laying Cast in situ/Ready Mix cement concrete M-30 as per Item No.39 terrace reservior

Providing and laying Cast in situ /Ready Mix cement concrete in M-30 of trap /quartzite /granite /gneiss metal for R.C.C. Waistslab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steelprops, laying /pumping, compaction, finishing uneven and honey combed surface with C.M. 1:3 of sufficient minimum thickness to give as mooth and even surface or roughening the surface if special finishish to be provided and curing etc. complete. (Excludinge in forcement, in cluding cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typemixer /concrete Batchmixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ /Ready Mix cement concrete in M-30 as per Item No. 54 Ground Floor to 1st Floor

Providing and laying Cast in situ /Ready Mix cement concrete in M-30 as per Item No. 54 1st To 2nd floor,2nd floor to 3rd floor, 3rd floor to 4th fllor,4th floor to 5th floor

Providing and laying Cast in situ /Ready Mix cement concrete in M-30 as per Item No. 54 5th floor to 6th floor,6th floor to 7th floor,7th floor to 8th floor,8th floor to 9th floor,9th floor to tearrace Floor

Providing and laying Cast insitu/Ready Mix cement concrete in M-30 of trap /granite /quartzite /gneiss metal for R.C.C. Pardi of required thickness including steel entering, formwork, coverblocks, laying /pumping, compacting and rough ening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc.complete.With fine aggregate (Crushedsand VSI Grade)

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 Ground Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 1st Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 2nd Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 3rd Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 4th Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 5th Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 6th Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 7th Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 8th Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 as per Item No. 59 9th Floor

Providing and fixing in position HCRM /CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules .including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part3) -1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc.Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 1st Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 2nd Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 3rd Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 4th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 5th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 6th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 7th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 8th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 71 9th Floor

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 Ground Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 1st Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 2nd Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 3rd Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 4th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 5th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 6th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 7th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 8th Floor

Providing Autoclaved Aerated Concrete Block masonary as per item No. 81 9th Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing sand faced plaster externally in cement mortar as per item no. 92 Ground Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 1st Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 2nd Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 3rd Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 4th Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 5th Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 6th Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 7th Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 8th Floor

Providing sand faced plaster externally in cement mortar as per item no. 92 9th Floor

Providing internal cement plaster 12mm. Thick in Single coats in cement mortar 1:3 with out neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 Ground Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 1st Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 2nd Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 3rd Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 4th Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 5th Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 6th Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 7th Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 8th Floor

Providing internal cement plaster 12mm. Thick in Single coats as per item No. 103 9th Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 with out neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 1st Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 2nd Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 3rd Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 4th Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 5th Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 6th Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 7th Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 8th Floor

Providing internal cement plaster 6mm thick in a single coat in cement mortar 1:3 as per item No. 114 9th Floor

Providing and applying gypsum plaster (with Gypsum materia l) with finishing with gypsum material in 10 to 13 milli meter thickness to previously plastered surface /or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 Ground Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 1st Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 2nd Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 3rd Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 4th Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 5th Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 6th Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 7th Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 8th Floor

Providing and applying gypsum plaster (with Gypsum materia l) as per item No. 124 9th Floor

Providing and applying Royal eLuxury Emulsion of approved make on internal wall surface as detailed be low Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10% or waterby 15 to 20% allowing to dry for 6 to 8hours After applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity.Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45 % or 65 to 70% by role Applying paints Royal eluxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.)

Providing and applying Royal eLuxury Emulsion as per item No. 135 Ground Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 1st Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 2nd Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 3rd Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 4th Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 5th Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 6th Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 7th Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 8th Floor

Providing and applying Royal eLuxury Emulsion as per item No. 135 9th Floor

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram / 15l). plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist.

Whole building

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 Ground Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 1st Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 2nd Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 3rd Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 4th Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 5th Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 6th Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 7th Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 8th Floor

Providing waterproofing in W.C. and bath including brick bat coba as per item No. 148 9th Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 Ground Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 1st Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 2nd Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 3rd Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 4th Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 5th Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 6th Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 7th Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 8th Floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado as per item No. 159 9th Floor

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and applying a base coat comprising of 1 Kilogram Polydee - MC and 1 Kilogram fresh cement after wetting the surface followed by drying the surface for 2days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2A : 1B)) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Providing and fixing 20 to 25 mm thick rough shahabad boxtype waterproofing treatment to vertical out side faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with waterproofing liquid Algae proof or other a like with one tile lift method, brushing the joints horizontally with cement slurry mixed with waterproofing liquid for width 30 to 35 mm and sloping coping over top most tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8to10 milli meter thickness ( flooring) with bonding chemical and confirming to IS15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints, curing and clearing etc. complete.

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 Ground Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 1st Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 2nd Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 3rd Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 4th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 5th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 6th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 7th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 8th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter as per item No. 173 9th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8to10 milli meter thickness (skirting) with bonding chemical and confirming to IS15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints, curing and clearing etc. complete.

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 Ground Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 1st Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 2nd Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 3rd Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 4th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 5th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 6th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 7th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 8th Floor

Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeteras per item No. 184 9th Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 Ground Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 1st Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 2nd Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 3rd Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 4th Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 5th Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 6th Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 7th Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 8th Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite as per item No. 195 9th Floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite stone for tread sand risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 Ground floor to first floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 first floor to 2nd floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 2nd floor to 3rd floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 3rd floor to 4th floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 4th floor to 5th floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 5th floor to 6th floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 6th floor to 7th floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 7th floor to 8th floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 8th floor to 9th floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite as per item No. 206 9th floor to 10th floor

Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick as per item No. 217 Ground Floor

Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick as per item No. 217 1st Floor

Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick as per item No. 217 2nd Floor

Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick as per item No. 217 3rd Floor

Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick as per item No. 217 4th Floor

Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick as per item No. 217 5th Floor

Providing and laying Polished Tandur Stone Skirting 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and laying Polished Tandur Stone Skirting 25mm to 30mm thick as per item No. 224 Ground Floor

Providing and laying Polished Tandur Stone Skirting 25mm to 30mm thick as per item No. 224 1st Floor

Providing and laying Polished Tandur Stone Skirting 25mm to 30mm thick as per item No. 224 2nd Floor

Providing and laying Polished Tandur Stone Skirting 25mm to 30mm thick as per item No. 224 3rd Floor

Providing and laying Polished Tandur Stone Skirting 25mm to 30mm thick as per item No. 224 4th Floor

Providing and laying Polished Tandur Stone Skirting 25mm to 30mm thick as per item No. 224 5th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes sand confirming to IS.15622 -2006 (GroupBla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 Ground Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 1st Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 2nd Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 3rd Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 4th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 5th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 6th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 7th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 8th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes as per item No. 231 9th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness and confirming to IS.15622 -2006 (GroupBla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete.

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 Ground Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 1st Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 2nd Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 3rd Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 4th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 5th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 6th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 7th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 8th Floor

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness as per item No. 242 9th Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. On C.M. 1:6 including filling joints with polymer base filler no sing / moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 Ground Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 1st Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 2nd Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 3rd Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 4th Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 5th Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 6th Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 7th Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 8th Floor

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite as per item No. 253 9th Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15mm (5 mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5 mm x 2) thick x 30 mm width on other style and bottom rails. Theinner panels laminated with 2 mm thick termiteproof, waterproof and fire resistant moulded PVC sheet with 2, 4, 6 design in different plain and / or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and / or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer incharge and manufacturers specification and drawing etc. complete.

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 Ground Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 1st Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 2nd Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 3rd Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 4th Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 5th Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 6th Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 7th Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 8th Floor

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness as per item No. 264 9th Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick (Toilet) as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 Ground Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 1st Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 2nd Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 3rd Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 4th Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 5th Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 6th Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 7th Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 8th Floor

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per item No. 275 9th Floor

Providing and fixing frame with / without ventilator of size as specified with Country cut teakwood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Providing and fixing frame with / without ventilator CCTW as per item No. 286 Ground Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 1st Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 2nd Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 3rd Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 4th Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 5th Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 6th Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 7th Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 8th Floor

Providing and fixing frame with / without ventilator CCTW as per item No. 286 9th Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window of Three tracks with rectangular pipe 95 X 38.10 X 0.90 mm at weigth 0.637 Kilogram/one Running metre. with window frame bottom track section 92 X 31.75 X 1.30 mm at weigth 1.070 Kilogram/oneRunning metre.Top and side track section of size 92 X 31.75 X 1.30 mm at weight 0.933 Kilogram/oneRunning metre. The shutter should be of bearing bottom 40 X 18 X 1.10 mm at weight 0.417 Kilogram/oneRunning metre. As per detailed drawings and as directed by Engineering charge with all necessary Aluminium section fixture and fastening such as roller bearing in nylon casting and self locking catch fifted in vertical section shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc., complete. with colour Anodising with box.

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 Ground Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 1st Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 2nd Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 3rd Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 4th Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 5th Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 6th Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 7th Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 8th Floor

a) Supplying and fixing in position( as per 1868/1982) Alluminium sliding window as per item No. 297 9th Floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 1st Floor

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 2nd Floor

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 3rd Floor

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 4th Floor

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 5th Floor

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 6th Floor

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 7th Floor

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 8th Floor

Providing and fixing in position powder coated aluminium louvered windows as per item No. 308 9th Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 Ground Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 1st Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 2nd Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 3rd Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 4th Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 5th Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 6th Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 7th Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 8th Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per item No. 318 9th Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 Ground Floor To 1st Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 1ST Floor To 2nd Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 2nd Floor To 3rd Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 3rd Floor To 4th Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 4th Floor To 5th Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 5th Floor To 6th Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 6th Floor To 7th Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 7th Floor To 8th Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 8th Floor To 9th Floor

Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail as per item No. 329 9th Floor To 10th Floor

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983).

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 1st Floor

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 2nd Floor

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 3rd Floor

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 4th Floor

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 5th Floor

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 6th Floor

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 7th Floor

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 8th Floor

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing as per item No. 342 9th Floor

Providing and fixing 45 cm wide mildsteel ladder of 40mm x 6mm mildsteel flat stringers and steps of 18 mm dia. Mildsteel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 cm x 30 cm x 30 cm and painting the ladder complete. (AntiCorossive Paint)

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 Ground Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 1st Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 2nd Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 3rd Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 4th Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 5th Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 6th Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 7th Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 8th Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia as per item No. 353 9th Floor

Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete.

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 Ground Floor

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 1st Floor

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 2nd Floor

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 3rd Floor

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 4th Floor

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 5th Floor

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 6th Floor

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 7th Floor

Providing and fixing European type white glazed earthenware coupled closet as per item No. 364 8th Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings,inletpipe with stop tap,brackets for fixing the cistern,32mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall.

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 Ground Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 1st Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 2nd Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 3rd Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 4th Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 5th Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 6th Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 7th Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 8th Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal as per item No. 374 9th Floor

Providing and fixing white glazed earthen ware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 Ground Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 1st Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 2nd Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 3rd Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 4th Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 5th Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 6th Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 7th Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 8th Floor

Providing and fixing white glazed earthen ware Wash Hand Basin as per item No. 385 9th Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror with 16 mm dia. nickel plated towel rod etc. complete.

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 Ground Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 1st Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 2nd Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 3rd Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 4th Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 5th Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 6th Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 7th Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 8th Floor

Providing and fixing 450 mm x 550 mm size superior type Belgium mirror as per item No. 396 9th Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. In length including all accessories complete.

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 Ground Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 1st Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 2nd Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 3rd Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 4th Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 5th Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 6th Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 7th Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 8th Floor

Providing and fixing chromium plated towel rod 16 mm dia and 75cm. as per item No. 407 9th Floor

Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Providing and fixing 15 mm dia. Screw down bib /stop tap of brass including necessary socket union nut complete.

Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complet

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 25 mm dia. Wheeled stop tap of brass including necessary sockets /union nut complete.

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 50 mm dia. Wheeled stop tap of brass including necessary sockets/ union nut complete.

Providing and fixing screw down for 80 mm. dia. wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing 15mm diameter concussion push button type brass/gun metal self- closing tap including necessary socket complete

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

Ground Floor

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and laying for 225 mm dia salt glazed S.W. pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Providing and fixing 50 mm dia meter water meter with non-return valve including strainer, sockets /union nut and including water meter box making locking arrangement and lock. [without chamber]

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channel shalf round G.S.W. pipes, Brick Masonry, plastering from inside and air tight with 75 mm thick R.C.C. cover medium duty 140 Kilogram etc. complete.

Providing and laying in trenches 80 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes ?of 8.57 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 100 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes ?of 12.43 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti?corrosive oil paint , 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing 75 mm dia stabiliser pipe /P.V.C. soil vent /waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Providing and fixing 90cmx60cm Granite plate engraving 10cm. Height letter,figures including painting the lefters/figures with approved colour and shade complete

Conveying excavated material upto lid of 20KM

Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/colour of 2.5mm thick including 1.5 Refractive index reflectorizing glass beads @250gm/sqm.Thickness of 2.5mm is exclusive of surface applied glass beads asper IRC35:2015. Initial Dry reflectivity RLshallbe>250mcd/sqm/lux measured in the initial 7days and sustained reflectivity RL of 100mcd/sqm/lux and Qd of 100mcd/sqm/lux measured at the end of 2years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC35:2015 clause 15.5.The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(ReferMORTH Clause 803 for technical Specificationand Performance for IRC 35:2015).

BASIC TEST OF CEMENT Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

BASIC TEST OF AGGREGATE.

a) Water Absorption, Specific Gravity,Impact Value, Crushing Value.

b) Sieve Analysis.

c) Abrasion Value.

d) Flakiness Index & Elongation Index.

e) Stripping Value. (for Bituminous Work)

f) Soundness

FINE AGGREGATE.

a) Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

b) Chloride & Sulphate Content.

c) Silt Factor.

CONCRETE

a) Compressive Strength OF C.C. Cube (Set of 3 cubes)

b) Concrete mix design by Accelerated curing method. (By Accelerated curing method)

WATER PH Value, Sulphate & Chloride Content.

STEEL BAR TESTING

a) Upto 16 mm (Set of 3 Bars)

b) Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

SOIL / MURUM Plate Load Bearing Test.(Excluding Transportation)

Providing detailed layout plan of area in scale 1:500 including carrying out contour survey and detailed Engineering plane table Survey with the help of 24 Alidade. The dolomite are a measurement of the plot and structures, trees, over head line and underground service amenities within the area, with triangular method and giving detailesofthestructures,suchastotalarea,typeofbuildinganddistancefromallcornerstakingtrialpit0.5x0.5x2.00m.-2Nos.peracreandcollectionofrecordfromcitysurvey/D.I.L.R.authoritiesandauthentication.Theplanshallbetracedon75micronpolysterfilmandshallbesubmittedalongwiththreeAmoniaprints.Thecontourlevelsshallbemarkedat0.5Meterintervals.Note:-Theitemsincludes-1)Traversingworkwiththeodoliteandsteeltape.2)LevellingGridWorkoftheterrain.3)DetailedEngineeringSurveyandcontouringworkoftheterrain.4)Plottingwork.5)CollectionofRecord.a)upto1Acre

Supplying and Fixing Car Parking Elevator upto 4 floor capacity 1.5 ton., Lift time 0.05 m/sec, 4 post

SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- G+4 floor (5 Stops/5 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 800 mm wide x 2000 mm high · Clear Car size of 1100 mm wide x 1400 mm deep x 2250mm high · Lift shaft available having clear size of 2000 mm wide x 1800mm deep. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min.18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and drawing of 2x1.5 sq.mm. FRLSH grade copper wires with 1.5 sq.mm earth wire in provided concealed pipes and terminating on modular accessories in box for point wiring for independent plug as per specification No WG-PW/SW

Supplying and erecting modular type 5 pin socket with safety shutters 3 module socket 6A 240V AC supply, duly erected on provided plate and box with wiring connections complete duly erected.

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

Providing and back filling carbon based environment friendly back fill earth conductivity enhancing compound of 25 kg bag complete.

Supplying, installing and testing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.I. cover complete with all accessories of G.I. materials & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/orany other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP.

Supplying and erecting bulk head LED fitting max. 10W (including 10W LED)with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness up to 3.3 kV

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB.

Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B22/E-27 base as per specification no. FG-LP.

Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/1200/ 1400 mm. sweep, complete erected on provided switch board.

Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying pedestal type air circulator 450 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator, metallic blades, overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 meter length and hand shield type 3 pin 5A. plug top complete with moisture proof treatment and ‘E’ class insulation.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m octagonal / conical GI pole).

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mmdia. G.l. Rod complete with all materials as per specification no. EAEP

Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with U shaped bracket with minimum 2 Years warranty as per specification No. FGODF/FL.

Supplying and erecting 6 to 32A, 10kA, SPMCB suitable to fix in 1 module of modular switch in provided box complete & duly concealed with necessary material and connected.

Providing PU paint to Octogonal poles as required of desired colour duly finished in an approved manner for 7 mtrs octogonal pole

Supplying and erecting integrated LED street light fitting 85-90W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 9300 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL.

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. APWCR/WC

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying and erecting midget type 3.0 litres instant type water heater of rustproof & shockproof ABS plastic body, high grade SS inner tank & 3kW heating element with corrosion & hard water protection, with minimum 3 safety protections (i.e. thermostat & thermal cut-out, function valve) complete with 6.5 bar pressure withstanding capacity 230/250V, 50Hz, A.C. supply with inlet and outlet, with 3 core PVC flexible copper wire leads duly tested and marking sr. no. and date of erection complete

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 320 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 54.89 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 480 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 250 kVA up to 320 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT

MSEDCL METER Charges

Supply Installation Testing & commissioning Of 4MP Network IR Dome/ Bullet camra ,Smart IR ,Optical glass window with higher light transmittance, 3D DNR (Digital Noise Reduction)ONVIF Conformance, Structure.WDR 120 or Above Wide temperature range: -35°C to 60°C31°F to 140°F)IP66, Lens 3.6mm/4 mm,Angle of view (H): 80.5°Day/Night ,IR Range Up to 30m (98 ft) WDR Digital Max. Resolution 1920×1080,ROI Supported,vedio Compression H.265/MJPEG OSD Up to 8 OSDs, Power12 V DC, or PoE

Supply Installation Testing & commissioning Of Network Video Recorder 32 channel input,Support 2-ch HDMI Up to 12 Megapixels resolution recording, Support RAID 0, 1, 5, 6, 1&,8 SATA HDDs, Up to 8TB for each HDD, Support N+1 Hot spare, Support for 12V Power output, HDMI/VGA Output, Recording Resolution, Resolution 12MP/6MP/5MP/4MP/ 3MP/1080p/960p/720p/D1/2CIF/CIF, Compression H.265/H.264, 8 SATA interfaces,Capacity up to 8TB for each HDDs, Array Type RAID 0, 1, 5, 6, 10.

Supply Installation Testing & commissioning of 43"TV Equivalent to:- LG

Supplying & erecting UPS of 1 KVA capacity complete with standard features, along with necessary SMF batteries for 20 mins. batterv backup

Supplying, erecting, testing and commissioning of 2kVA capacity online pure sine wave, with backup time. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS

Supply Installation Testing & commissioning of 8000 GB Hard Disk for video Surveillance Equivalent to:- Western Digital /Seagate

Supplying, fixing, and configuring 8-ports 1 G unmanaged gigabit POE switch erected in provided rack complete

Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch,10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supply, Installation, Testing UTP Connector (RJ-45) as per specification No.WG-NAS/UTPC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supply, Installation, Testing and Commissioning of 8 Zone Microprocessor base conventional type fire alarm control panel includes power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. Main product Make of Agni/ Apollo/Ravel / or Equivalent

Supply, Installation, testing & commissioning of conventional type smoke Detector complete . to be installed under / above false ceiling, roof and concealed space, etc. Smoke Detectors with Base Make of Agni/ Apollo/Ravel or Equivalent

Supply, Installation, testing & Commissioning of conventional Hooter Make of Agni/ Apollo/Ravel or Equivalent.

Supply, Installation, testing & commissioning of conventional manual call point complete with push button, enclosed in box with provision for cable or conduit coupling. The unit to be painted fire red outside, Make of Agni/ Apollo/Ravel or Equivalent

Supplying and erecting XLPE armoured cable 2 core 1.5 sq. mm FRLS copper conductor complete erected on wall / celling as per specification

Supply, Installation, testing & Commissioning of multi sensor heat detector with smoke and heat combination (RoR + fix temperature) with base on back box, necessary connections complete as per specification no. FF-FAS/HD

Supply, Installation, Testing and Commissioning of Response indicator

SITC of Power Coated M.S. Junction box for Smoke Detector

Gajanan Construction