Construction of 200 bedded BMC Hostel Premises Located at Kantatoli Chowk Ranchi

Jharkhand State Building Construction Corporation Limited Regd. Office: - Building Construction Department, Govt. of Jharkhand, Project Building, P.O. - Dhurwa, Ranchi-834004, Jharkhand Phone No.:- 0651-2446257/2446258/2446259, e-mail:[email protected]

NAME OF WORK : - PROPOSED CONSTRUCTION OF 200 BEDDED BMC HOSTEL BUILDING AT KATATOLI RANCHI, JHARKHAND.

Name of Agency /Supplier/Contractor

Sl. No Item. Item Description. Unit Rate

Non -Scheduled item

1 MR Providing and fixing HEALTH FAUCET of specification:Thickness of Ni-Cr coating-NA,Types of Shower:Hand Shower,:Material-ABS PLASTIC,Inlet Length of Shower Pipe (mm)-100 millimeter Shower Diameter / Length (mm):50,Shower Width (mm):50,Weight of Water Shower in grams (+/- 50 GM) 200gram Each

2 MR Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel of cubical construction, wall mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 42. For Terrace Pump Each

3 MR Providing and Fixing Direct Mounting Pressure Gauge Assemble with Gate/Ball Valve -Nominal Size of the Dial-40mm,Measurement Range-0-400,Material of case-Stainless Steel-Gr 304,Material of Dial Plate-Aluminium,Material for Window cover-Transpartent Acrylic,Overall Dimension-500mmX500mmX50mm Each

4 MR Providing and Fixing Air release Valve 150 mm Dia AIR RELEASE VALVE Double Ball Type PN - 10 - Flanges as per BS:4504 PN 10 FF (Drilled) 15 Bar Hyd. 10 Bar Hyd.Pattern / Type-Double Ball Type,Pressure Rating / Class-PN-10,Body-Cast Iron,End Connection-Flanged End,SUB CATEGORY-CI Air Release Valve Each

5 MR Providing and Fixing MS Structure support for piping,Size: 20 X 20 X 3 mm,Thickness: 3 mm,Shape: L Shaped,Usage/Application: Construction,Material: Mild Steel,Structure: T angle KG

6 MR Providing and fixing 25 mm nominal gun metal gate valve class I with CI wheel of approved quality with union (Screwed end) Each

7 MR Supplying and fixing of hose cabinet of size 450mm x 450mm x 250mm made of 2mm thick M.S. sheet with 6mm thick glazed glass door including necessary locking arrangment suitable to accomodate 1 nos. 15 mtr. long hose pipe, 1 no. branch pipe mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect. Each

8 MR Providing , fixing Dry Chemical Powder (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 20oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (4 Kg Capacity) Each

9 MR Providing , fixing Carbon Di-oxide Type , Gas Confirming to IS ‘15222’ , Cylinder Confirming to ‘IS 7285’ & PESO approved ,Controllable Discharge Mechanism, Discharge Hose & Horn As per ‘IS 15683’ & ‘IS 2878’ ISI mark Fire Extinguishers (Wheel Type or Squeeze Grip Type). Operating Temperature :- (-)20oC to (+)55oC Suitable for ‘B’ ‘C’ Class of FIRE (4.5 Kg Capacity) Each

10 MR Providing , fixing Modular type Fire Extinguishers for electrical rooms (Stored Pressure Type) Mono Ammonium Phosphate 50% powder confirming to ‘IS 14609’ , Nitrogen Pressurized, Controllable Discharge Mechanism, Pressure Gauge, Discharge Hose & Nozzle Epoxy Polyester Powder Coated As per ‘IS 15683’ ISI mark Fire Extinguishers. Operating Temperature: - (-) 10oC to (+) 55oC Suitable for ‘A’ ‘B’ ‘C’ Class of FIRE complete in all respects (5 Kg Capacity) Each

11 MR Providing and placing in position single bed with an overall size - 2030mm (L) X 925mm (W) X 790/430mm (H) with metal frame made out of MS/CRCA steel pipe having cross-section area 25mm X 50mm with 1.2 thick and MS angle having size 19mm x 19mm x 1.0mm thick. The side panel and storage shall be made out of 1mm thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. The mattress panel shall be made up of 12mm thick plywood. The storage should be manual openable with the assistance of mattress panel. The legs shall be made of M.S.E.R.W pipe having cross-section area 40mm X 40mm with 1.2 mm thick. All metal part shall be powder coating finish with DFT(Dry Film Thickness) - 35µ min. The PPCP shoes shall be insert into bottom of legs for avoid skretches on the floors. Nos.

12 MR Supplying & Placing executive table in completely knock down conditions with an overall size 1200mm X 600mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The table top shall be made up of 25mm thick particle board with approved laminate and finish as per approved shade. The profile shall be in rectangle shape with one side post forming edges. The top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. It should be made up of 18mm thick particle board and profile shall be in linear shape. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. One hanging drawer shall be provided with an overall size 400mm X 450mm X 150mm with key locking mechanism. The drawer shall be made up of Pre-laminated particle board of grade II of IS 12823. Drawer side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The drawer shall be operated with Al die cast handle and easily close & open with the assistance of ball bearing channel to enable smooth operation. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Nos.

13 MR Providing and supplying plastic shell chair. The seat and back shall be made up of injection moulded high impact strength polypropylene polymer. The understructure shall consist of MS/CRCA round pipe frame having dia. 22.2mm with 1.6mm thick and 35mmX15mm capsule pipe with 1.6mm thick. It should be powder coated to the thickness of 40-60µ DFT. There shall be plastic show provided at the bottom. The overall size of the chair shall be 845mm(H) X 510mm(W) X 550mm(D). Nos.

14 MR Supplying & Placing Stainless Steel Rectangular Dining Table with Round fixed Chair of specification:Table top / Chair seat / bench seat material:Stainless steel Grade 202 galvanized,Table top / Chair seat / bench seat thickness: 0.8 mm,Leg material for Table and Chair/bench: Stainless steel Grade 202 galvanized,Wall thickness of Leg material (for Table and Chair/bench):0.8 mm Support material for Table and Chair/bench:Stainless steel Grade 202 galvanized,Backrest material for Chair/bench:No backrest,Table - Chair/bench attaching material:MS ERW tubes conforming to IS : 7138 - latest,Product Configuration:Provision for 8 - persons,Mode of supply:Assembled Ready To Use,Table Foot rest:All four sides along the width and depth both.,Chair/bench back rest Without Support for Table top:Widthwise support,Number of support for Table top:1 no.,Support for chair/bench seat Depthwise support:Width of table ± 10 mm,:2150 for 8-seater,Chair/bench Leg size ± 2 mm:25 mm Dia,Size of support pipes/square sections (for table): 25 mm (dia),Size of support pipes/square sections (for chair/bench):15 mm Dia Nos.

15 MR Supplying & Placing Conference table in completely knock down conditions with an overall size 1800mm X 900mm X 750mm that is to be assembled at site. The table top shall have same size made up of 25mm thick Pre-laminated particle board of grade II of IS 12823 with one side laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. Single sided flapper box shall be enclosed at table top that houses video, audio, data and power connection discretely. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The modesty panel shall be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. The table shall be supported on SS pipe leg 202 grade. It shall have cross section area 80mm X 20mm. There shall be buffers provided to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification.The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380. Nos.

16 MR Supplying & Placing Stretcher Trolley, Removable Top, Powder Coated of specification: Overall Dimension - 2050mm x 560mm,Material:SS and Mild Steel,Color:Gray,Shape:Standard,Features Modern,Age Group:Above 12 Years,Castor Diameter Millimetre:150MM,Depth:560MM,Foldable:NO,Gender:Unisex,Handle Type:Easy,Is It Portable:,NO,Lcd Display:No Mounted Nos.

17 MR Supplying & Placing Saline Stand, Height Adjustable, Stainless Steel Frame of specification:Number of Hooks on Rod :2,Number of Castor Wheels: 5,Number of Castor Brakes: 2,Type of Coating :Na For SS,Material of Frame: Stainless Steel (SS 304),Material of Rod: Stainless Steel (SS 304),Material of Base Frame :Stainless Steel (SS 304) Height Adjustment of Rod :1370-2340 Nos.

18 MR Overall Dimension: Overall Sizes Diagonal Leg Dia 538 mm H510 min-690max. The seat shall be made of 15 mm thick plywood upholstered with high resiliance moulded polyurethane foam 50mm thick having density 40kg/m³ with leatherette tapestry 0.8mm thick with spin section of thickness 1mm & non corrosive. It has a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height adjustment of the seat base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is welded with the legs and it accommodate and cover the lead screw mechanism. The under-structure consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg give a round & clean look. All the legs is Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating . Safe working load is 135kg. Company should be ISO-9001, 14001, 45001, 50001, BIFMA, AIOTA and Greenguard certified. European CE certificate should be provided from Notifying body with 4 digit registration code. The bidder should be UFDA registered. The following test reports along with the bid which should be taken from NABL certified lab:1) ISO certificate should be taken from NABCB approved lab. 2) The bidder should having Central Drugs Standard Control Organization registration. Nos.

19 MR Providing, supplying and placing steel Almirah. The overall size of the Almirah shall be 900mm (W) X 450mm (D) X 1830mm (H). The cabinet shall be supplied with 2 nos. of doors and 4 nos. of adjustable shelves. The doors shall be operated with aesthetically appealing snap fit ABS plastic handle and concealed crank hinge. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg maximum. Each rack shall be provided with stiffener at bottom for strength. The entire body panel, shelf shall be made of high yield strength 0.8mm thick CRCA sheet of grade ‘D’ confirming to IS: 513. To protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the Almirah. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-60µ thick. Nos.

20 MR Providing, supplying and Installation of AG Green Pure Chill Storage 120 PSS RO+UV+CuZn Aquaguard Storage Water Cooler Cum Purifier Water Storage Capacity: 120 ltrs. Three Faucets, Approximate External Dimensions (WXDXH) 750 x 690 x 1420 mm, Input Voltage 230 V AC (50 Hz), Power Rating (Max) 850 ± 10%, Water Storage Tank Capacity 120 Ltr., Cooling Capacity at Comfort Level 80 LPH, Water Outlet Temperature at rated condition 17°C±1°C, Refrigerant HFC R 134 a, Thermal Insulation for Storage Tank PUF, 3 Cold Faucets, 7 Stages for Filter cum Purifier, Active Copper Zinc Booster, 25% Purified Water Recovery, 90% (Approx) Rejection of TDS, 50 LPH Permeate (Purified Water) Production Capacity, Storage Tank & Drain Tray Material SS 304, Outer Body Material Front Panel SS 304 and rest CRCA Powder Coated Steel, Concealed Type of Product, Indoor Type Installation, Weight 92 Kg, Nos.