Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 CrAdmitted-Finance | ₹4.9 Cr | L1 | Admitted-Finance |
| 2 | L2₹5.8 Cr+₹87.6 L (17.8%)Admitted-Finance | ₹5.8 Cr+₹87.6 L (17.8%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Luthra Pneumsys L1 | ENGINEERING CONSOLIDATED L2 |
|---|---|---|---|---|---|
| 1.00 | Collection of FIM, handling, transportation, storage, pickling & passivation, physical measurement, checking interferences, fit-up, installation & alignment on supports of SS304L pipelines, inline equipment & fittings at various elevations. This also includes preparation of fabrication ISO drawings, supply of consumables, instruments, set-up of scaffoldings, setting up of fabrication shop, dimensional measurement, providing as built drawings, documentation, FIM accounting etc. as per technical specifications, drawings and as per direction of EIC.
Size of pipes involved are from 8NB to 80NB.
Pipes ≤1" shall be considered as 1 Inch-meter. | 4,000 | lnch-meter | 564 ₹22,56,000 Lowest | 1,200 ₹48,00,000 |
| 2.00 | Butt/Nozzle/Miter welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wires with argon purging and shielding including edge preparation, fit-up, LP examination on root and final pass of joints, weld passivation, along with supply of all consumables and filler wires as per technical specifications, drawings and as per direction of EIC.
Pipe size ranging from 8NB to 80NB.
Pipes ≤1" shall be considered as 1 Inch-dia. | 4,600 | lnch-dia | 1,177 ₹54,14,200 Lowest | 1,800 ₹82,80,000 |
| 3.00 | Radiography of Butt/Miter Joints using X-ray /Gamma ray at shop /site at various elevations. Arrangement of Radiography equipment, tools, darkroom and pits at site. Supply of all consumables like films, chemicals etc. to carryout radiography as per approved procedure and technical specifications. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement. The contractor's scope also includes digitization of radiographs. The contractor shall submit the digitized Radiographs as well as RT films along with other inspection reports. | 8,000 | Number of Exposures | 1,177 ₹94,16,000 Lowest | 1,300 ₹1,04,00,000 |
| 4.00 | Fillet/Flange welding of SS to SS and SS to MS material by GTAW process using ER308L/309L filler wires with argon purging/shielding including edge preparation, fit-up, LP examination on root and final passes, weld passivation, along with supply of all consumables and filler wires as per technical specifications.
Pipes≤l" shall be considered as 1" dia. | 3,200 | Inch-dia | 735 ₹23,52,000 Lowest | 1,100 ₹35,20,000 |
| 5.00 | Fillet welding of MS to MS structural material including edge preparation, fit-up, LP examination on root and final passes along with supply of all consumables and Electrodes/filler wires as per technical specifications. | 1,600 | Inch-dia | 490 ₹7,84,000 | 200 ₹3,20,000 Lowest |
| 6.00 | Cold bending of SS 304L Pipes including cleaning, hydrotesting, LP examination and dimensional measurement as per technical specifications. Bending machine, dies, poison plates and other consumables as required are in the scope of contractor.
Pipe size ranging from 8NB to 50NB.
Pipes ≤ 1" shall be considered as 1 Inch- bend. | 4,400 | Inch-bend | 294 ₹12,93,600 Lowest | 500 ₹22,00,000 |
| 7.00 | Supply, fabrication and installation of SS-304L identification tags of size 100mm (Length) x 25mm (Width) x 1mm (Thick). line number/ fitting designation given by the department engraved with 5mm Text height and highlighted with black paint. Each line tag shall be placed at suitable locations as per technical specification and instruction given by the EIC. | 4,000 | Nos. | 294 ₹11,76,000 | 250 ₹10,00,000 Lowest |
| 8.00 | Hydrostatic testing of Pipe Embedment’s, including cutting of blinds, cleaning, straightening of bend EP's, Measurement of coordinates of EP, Numbering of EP, Preparation of ends for hydrostatic test, testing and air drying, supply and installation of PVC end caps after completion of activity as per technical specification and instruction of EIC. It also includes providing testing setup and other consumables as required.
Size of pipes involved are from 8NB to 80NB. | 300 | Nos. | 1,960 ₹5,88,000 Lowest | 2,000 ₹6,00,000 |
| 9.00 | Collection from departmental stores within 2 km distance, identification, Loading, Unloading, Handling, Transportation, Pickling & Passivation and Erection of Equipment’s (like LAS, RSW and Its components, etc.) on staging members at various elevations. It includes physical measurement, alignment, assembling of components, levelling, chipping of concrete if required for levelling, erection on plate EPs / staging member as per Orientation drawings/ equipment layouts, technical Specification and as per directions of EIC. All the lifting tools & tackles, cranes/ hydra with operator and riggers, handling equipment’s and necessary safety gadgets and other consumables & non-consumables as required. | 68,700 | Kg | 113 ₹77,63,100 | 110 ₹75,57,000 Lowest |
| 10.00 | Supply of material, Fabrication, Installation/ erection of MS support structure for LAS, compensatory shielding for LAS drain pipe, made from angle, channel, box section, plates and pipe. This includes cleaning, transportation, handling, lifting at required elevation, cutting, Machining, drilling holes, edge preparation, fit-up, levelling, welding, final pass LP examination etc as per Drawings, technical specification and as per directions of EIC. | 20,750 | Kg | 280 ₹58,10,000 | 220 ₹45,65,000 Lowest |
Tender Value
₹3.7 Cr
EMD Value
₹7.4 L
Closing Date
31 Jul 2025, 3:00 pmClosed
Project Director, INRPC, NRB, BARC, Tarapur
INRPC, NRB BARC Tarapur, Palghar, Maharashtra - 401502
Sampling Blister Internal Piping and LAS Installation of Block-102A and 110 at INRPC, BARC, Tarapur
2025_NRB_869250_1
BARC(T)/NRB/INRPC/MPT- 547/2025/1210
Open Tender
Metal Fabrication
Works
210 days
INRP, BARC, TARAPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹7.4 L
Meeting Room, Project Director office, INRPC
19 Aug 2025
17 Jul 2025
1 Aug 2025
17 Jul 2025
31 Jul 2025
17 Jul 2025
17 Jul 2025 - 22 Jul 2025
23 Jul 2025
Amount
Collection of FIM, handling, transportation, storage, pickling & passivation, physical measurement, checking interferences, fit-up, installation & alignment on supports of SS304L pipelines, inline equipment & fittings at various elevations. This also includes preparation of fabrication ISO drawings, supply of consumables, instruments, set-up of scaffoldings, setting up of fabrication shop, dimensional measurement, providing as built drawings, documentation, FIM accounting etc. as per technical specifications, drawings and as per direction of EIC. Size of pipes involved are from 8NB to 80NB. Pipes ≤1" shall be considered as 1 Inch-meter.
Butt/Nozzle/Miter welding of SS304L pipes, fittings, etc. by GTAW process using ER 308L filler wires with argon purging and shielding including edge preparation, fit-up, LP examination on root and final pass of joints, weld passivation, along with supply of all consumables and filler wires as per technical specifications, drawings and as per direction of EIC. Pipe size ranging from 8NB to 80NB. Pipes ≤1" shall be considered as 1 Inch-dia.
Radiography of Butt/Miter Joints using X-ray /Gamma ray at shop /site at various elevations. Arrangement of Radiography equipment, tools, darkroom and pits at site. Supply of all consumables like films, chemicals etc. to carryout radiography as per approved procedure and technical specifications. Re-shoots, retake, repair and 3% audit radiography joints will not be counted for measurement. The contractor's scope also includes digitization of radiographs. The contractor shall submit the digitized Radiographs as well as RT films along with other inspection reports.
Fillet/Flange welding of SS to SS and SS to MS material by GTAW process using ER308L/309L filler wires with argon purging/shielding including edge preparation, fit-up, LP examination on root and final passes, weld passivation, along with supply of all consumables and filler wires as per technical specifications. Pipes≤l" shall be considered as 1" dia.
Fillet welding of MS to MS structural material including edge preparation, fit-up, LP examination on root and final passes along with supply of all consumables and Electrodes/filler wires as per technical specifications.
Cold bending of SS 304L Pipes including cleaning, hydrotesting, LP examination and dimensional measurement as per technical specifications. Bending machine, dies, poison plates and other consumables as required are in the scope of contractor. Pipe size ranging from 8NB to 50NB. Pipes ≤ 1" shall be considered as 1 Inch- bend.
Supply, fabrication and installation of SS-304L identification tags of size 100mm (Length) x 25mm (Width) x 1mm (Thick). line number/ fitting designation given by the department engraved with 5mm Text height and highlighted with black paint. Each line tag shall be placed at suitable locations as per technical specification and instruction given by the EIC.
Hydrostatic testing of Pipe Embedment’s, including cutting of blinds, cleaning, straightening of bend EP's, Measurement of coordinates of EP, Numbering of EP, Preparation of ends for hydrostatic test, testing and air drying, supply and installation of PVC end caps after completion of activity as per technical specification and instruction of EIC. It also includes providing testing setup and other consumables as required. Size of pipes involved are from 8NB to 80NB.
Collection from departmental stores within 2 km distance, identification, Loading, Unloading, Handling, Transportation, Pickling & Passivation and Erection of Equipment’s (like LAS, RSW and Its components, etc.) on staging members at various elevations. It includes physical measurement, alignment, assembling of components, levelling, chipping of concrete if required for levelling, erection on plate EPs / staging member as per Orientation drawings/ equipment layouts, technical Specification and as per directions of EIC. All the lifting tools & tackles, cranes/ hydra with operator and riggers, handling equipment’s and necessary safety gadgets and other consumables & non-consumables as required.
Supply of material, Fabrication, Installation/ erection of MS support structure for LAS, compensatory shielding for LAS drain pipe, made from angle, channel, box section, plates and pipe. This includes cleaning, transportation, handling, lifting at required elevation, cutting, Machining, drilling holes, edge preparation, fit-up, levelling, welding, final pass LP examination etc as per Drawings, technical specification and as per directions of EIC.
Collection of FIM, fabrication, fit up, welding and LP Examination of SS304L end blinds to the pipe/ pipe Eps as per Drawings, technical specification and as per directions of EIC. 1010 nos for size ranging 8NB to 25NB & 60 nos for 80NB pipe size.
Collection of FIM, fabrication and erection of piping supports, Top & bottom cubicle cover plates, including handling, transportation, pickling & passivation, cutting, drilling hole/tapping, edge preparation, fit-up, welding, inspection, leak testing of cover plate, as per Drawings, technical specification and as per directions of EIC.
Supply and installation of Bolts with wing Nut and washer of size M-8-35mm long SS304 as per Drawings, technical specification and as per directions of EIC.
Supply and installation of Neoprene gasket as per Drawings, technical specification and as per directions of EIC. Each gaste Size length-2400x width-30mm- thickness 3mm.
Pickling and passivation of Sampling blister cubicles, as per Drawings, technical specification, approved procedure and as per directions of EIC. All the consumables and testing chemicals are in the scope of contractor.
Supply and Painting one coat each of epoxy primer and epoxy paint on MS Structural of approved brand and manufacture, it includes preparation of surfaces as per Drawings, technical specification and as per directions of EIC.
Supply, fabrication and erection of SS Angle cover plate angle frame of top & bottom cubicle, including handling, transportation, pickling & passivation, cutting, drilling hole/tapping, edge preparation, fit-up, welding, testing as per Drawings, technical specification and as per directions of EIC.
Supply, fabrication and installation of Lead wool, packing of duct after piping with lead wool & sealing with SS cover plate. It includes handling, transportation, edge preparation, fit-up, leak testing as per Drawings, technical specification and as per directions of EIC.
ENGINEERING CONSOLIDATED (BID ID -3258362)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
BOQ.xls
BOQ • 0.33 MB
BOQ_2.xls
BOQ • 0.11 MB
Tenderdocument.pdf
Tender Documents • 8.84 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .