PROVIDING IMPROVEMENT ACCESS TO WATER THROUGH HOUSE HOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME SHERKHAN WALA, BLOCK BUDHLADA, DISTT. MANSA

Item Wise Description :

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km (a) Jalalabad Sand (Av. Lead 167 Km) Up to 40 km CSR Item No. 5.2 (i)

41 km to 60 km

61 km to 150 km

150 km to 167 km

(b) Gagger Sand (Av Lead 320 Km.) from Pathankot Up to 40 km CSR Item No. 5.2 (i)

41 km to 60 km

61 km to 150 km

150 km to 320 km

(d) Bajri (Av Lead 320 Km.) Up to 40 km CSR Item No. 5.2 (i)

41 km to 60 km

61 km to 150 km

150 km to 320 km

Cement concrete 1:8:16 with Stone ballast 40mm gauge using concrere mixer volumatric type. CSR Item No. 10.6 (b) (ii)

Reinforced cement concrete M-30 with cement @450/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in superstructure. CSR Item No. 10.23

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth CSR Item No. 11.5

Conglomerate floor 40mm thick cement conc. 1:2:4 CSR Item No. 14.6

12.5mm thick cement plaster 1:2 CSR Item No. 15.7

12.5mm thick cement plaster 1:4 CSR Item No. 15.9

20mm thick cement plaster 1:4 in two coat work CSR Item No. 15.20

Cement rendering on plaster 1mm thick CSR Item No. 15.48

White washing (Three coats) CSR Item No. 16.3

Applying pink primer on aluminum priming coat on wood work including prepration of surface knotting and stopping. a) With Special Quality paint. CSR Item No. 16.17

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. a) With special quality paint. CSR Item No. 16.18

Hollock wood, doors, shutter, windows, shutter including hinges, screws, chocks, cheats, stops, cords etc. complete fixed in position. (ii) 35 mm thick CSR Item No. 17.10 (iii)

Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade as per IS 1786-2008 for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete. CSR Item No. 18.18

115 mm thick brick on edge lining in herringbone bond/zig-zag or other specified pattern laid in 1:3 cement sand mortar over LDPE (b) In Bed CSR Item No. 19.32

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where which of street /Lane from wall is less than 3 meter including trimming and dressing sides levelling of beds of treches to corrorct grade , cutting joint holes, refilling consolldation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing etc. and removal of surplus soil from the side upto 15 meter distance complete in all respects. Earth work upto 1.5 m depth (i) All classes of soil except rocky CSR Item No. 28.1

Supplying and fixing of ISI Marked CI D- joint ( complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting, Jointing and testing etc. But excluding cost of excavation complete. (a) 80mm i/d CSR Item No. 28.10

(b) 100mm i/d

(c) 150mm i/d

Providing, Laying, fixing & jointing of P.V.C Pipes as per ISI-4985 (ISI Marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradlents, cutting, jointing and testing complete as per specifications. Including specials and excavation minimum cover 1 mtr (6kg/cm2 pressure) 63 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2

110 mm o/d CSR Item No. 28.13 b) + 28.18 + 28.2

Supplying and laying D.I. Specials/fitings as per IS: 9523-2000 (ISI marked with the prior approval of Engineer-in-Charge ), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding tools and plants, rops, guye, etc. complete in all respects. (a) D.I specials upto 300mm i/d CSR Item No. 28.24

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410 ) and Bronze ( gunmeted) working parts Sluice Valves ISI marked 14846-2000, including, jointing, testing & cost of Nut, Bolt & insertion sheet all carriage complete ( with the approval of Engineer-in-Charge). CSR Item No. 28.27 A (a) 80mm i/d Sluice Valves

(b) 100mm i/d Sluice Valves Socketted or Flanged

(c) 150mm i/d Sluice Valves CSR Item No. 28.27 A

Bailing out water from the trenches for making new connections in fully charged pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required (a) Upto 300mm i/d CSR Item No. 28.49

Construction of masonary sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (a) 0.60 mtr x 0.60 mtr. CSR Item No. 28.66

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method . Including excavation, stringing and jointing of pipe upto 160mm complete CSR Item No. 28.71

providing orange colour safety footrest of mininum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having mininum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with mininum 112mm space between protruted legs having 2mm tread on top surfacs by ribbing or chequering besides necessary and adequate anchoring projection on tail length on 138 mm as standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4(1 cement 2 sand:4 stone aggragate) complete as per design. CSR Item No. 29.37

Non Schedule Items Silt clearance from RCC pipe Channel of Size 200 mm i/d

Non Shedule Item RCC pipe line taking out form trenches of Size 200 mm i/d

Non Shedule Item Lowring of RCC pipe line of Size 200 mm i/d

Non Shedule Item Providing & fixing of Collar 250mm i/d

Non Shedule Item Repair of leakage of Dome of existing OHRS of Cap. 100 cum

Non Shedule Item Providing & fixing of 6" expansion Joint

Non Shedule Item Pressure gauge fixed on outlet pipe in pump chamber including copper pipe gate valve

Non Shedule Item Providing & fixing 150mm i/d GI floating arm 5.20 mtr long including CI Sluice valve ISI marked, CI servival Bend, rod, drum Complete in all respect.

Non Shedule Item Providing & fixing electric fan 48" and regulator etc. complete.(Reputed make)

Non Shedule Item Providing & Fixing LED Tube Light Fitting 20W on wall etc..(Reputed make)

Non Shedule Item Dismantling brick of flanged stone flooring without concrete base and recondition

Non Shedule Item Providing, installing testing & commissioning of 1No. electrically centnfugel driven pump set capable of delivering 300 LPM against a head of 36 Mtr along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil imersed starter, Main Switch,Voltmeter .Ampere Meter, ELCB, Shunt Capacitor.Single Phase, preventer indicating Lamps , Kit Kat etc including cost of Electronic over current relay complete in all respects. Clear Water Pumping set Discharge = 300 LPM Head = 36 Mtr BHP = 12.50 ( Motor with Pump)

Non Shedule Item Panel Board for Clear Water Motor of 12.50 BHP

Non Shedule Item Panel Board for Raw Water Motor of 3.00 BHP

Non Shedule Item Providing, installing, testing & Commissioning one no. Electronically acturated, Diaphragm operated, Metering system, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Litres of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 kg./ sqcm and suction lift not less than 1.5m as per DWSS standard specifications.

Non Shedule Item Providing house hold connection including laying, jointing, fixing testing below ground level MDPE pipe and above of ground level GI pipes (as approved by Engineer-In-Charge), including cost of excavation, Refilling, CI bib cock as per IS:210 with stainless steel spindle, 15mm i/d GI pipe 2.50 Mtr. & 15mm i/d MDPE pipe 2.00 Mtr. (length on average basis) 3" uPVC clamp, ISI marked G.M. Ferrule as per IS:2692 connection of 15mm i/d ferrule midium, specials such as tees, bends, sockets, elbow, nipples (100 mm & 150mm) Union Copplings, GI hooks etc., cutting, threading, making hole in wall and testing in treanches in the ground all material should be of approved make (to the approval of Engineer-in-charge) complete in all respect including cost of carriage. (Ref. CSR item Nos. 28.1, 28.36, 28.34 B, 30.65 b. Water Connection on Old pipe line

Non Shedule Item Water Connection on New pipe line

Non Shedule Item Repair of old water connection

Non Shedule Item Painting of Sign Board

Non Shedule Item Credit of old material for floating arm

Non Shedule Item Credit of old Sluice Valve

Non Shedule Item Credit of old Expansion Joint

Non Shedule Item Credit of old Pumping machinery

Non Shedule Item Credit of old Panel Board for Clear Water Motor

Non Shedule Item Credit of old Panel Board for Raw Water Motor