NIT NO:94/ZONE 07/2026 RAIPUR DATED:08/06/2026

MUNICIPAL CORPORATION RAIPUR

Name of Work :- संत रामदास वार्ड क्रमांक 25 अंतर्गत आबकारी विभाग के लिए गोदाम सीमा एवं अन्य निर्माण एवं मरम्मत कार्य।

AS PER SCHEDULE OF RATES -2015 (C.G. P.W.D.)

S.N. PARTICULARS Qty. UNIT RATE

Excavation for all types and sizes of foundations, trenches & drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift & lead upto 50m (at least 5m away from the excavated area), i/c dressing & leveling of pits. 127.30 CUM 185.00

* Columns 129.60 CUM 185.00

2 SOR Item No. - 16.3.3

Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead. 429.60 CUM 263.00

3 S.O.R. Item No. - 1.26

Carriage by mechanical transport upto 5 km lead: Earth 386.64 CUM 91.50

Dismantled Building debris (Mulba) 81.00 CUM 91.50

4 S.O.R. Item No. - 1.18

Providing & filling in plinth with sand,crusher dust or moorum under floor under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, i/c dressing etc. complete. . 98.75 CUM 371.00

5 SOR Item No. - 3.1.2

Providing & laying nominal mix cement concrete 1:4:8 with crushed stone aggregate using concrete mixer 40mm nominal size. 170.46 CUM 2659.00

6 SOR Item No. - 3.4.2

Providing & laying mechanically mixed c.c.mix with 20 mm metal. 1:1½:3 (M20)

* Column's trapazoidel portion - h/6{ A1+A2+4Am}

* Column's up to plinth level

* Plinth beam 45.00 CUM 4163.00

* Column's above plinth level

* door beam 37.80 CUM 4260.50

7 SOR Item No. - 3.12.4

Steel required for R.C.C.work fixed in position with complete cutting & bending I/c cost of binding wire 3129.84 KG 54.50

8 SOR Item No. - 7.5.4

Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS: 12894-2002 of class designation 4.0 in---- 14.00 CUM 3384.00

9 SOR Item No. - 11.2.4

Plaster work - 12 mm thick cement plaster on brick work with 1:6 c.m. 2890.00 SQM 91.50

10 SOR Item No. - 14.45

Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth i/c necessary repair to scratches etc. complete. 2625.00 SQM 5.20

11 SOR Item No. - 14.52

Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete 5515.00 SQM 63.00

12 SOR Item No. - 14.16.2

Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish. On old work (One or more coats applied @ 0.83 ltr/ 10 sqm) 5515.00 SQM 47.50

13 SOR Item No. - 9.3.1

Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work i/c cutting,hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof & bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. 37991.28 KG 88.50

14 SOR Item No. - 10.16.1

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns --- Ridges plain (500-600mm) 240.00 RM 552.00

15 SOR Item No. - 10.11

Supply and fixing of precoated galvanized iron profile sheets (size, shape & pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120 gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation andshould be supplied in single length upto 12 metre or as desined by Engineer-in-charge. ----- 1663.50 SQM 636.00

16 SOR Item No. - 1.1 (Elect. SOR 2020)

Wiring for light/fan/exhaust fan /call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp piano type switch, phenolic laminated sheet, suitable size M.S. box etc as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

1.1.1 Short Point 40.00 NO 240.00

1.1.2 Medium Point 60.00 NO 376.00

1.1.3 Long Point 45.00 NO 469.00

17 SOR Item No. - 12.65.2

Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring. 19.20 SQM 1570.00

18 SOR Item No. - 6.1.3

Supplying, installation, testing and commissioning of following sizes ceiling fan i/c wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star & above, IS: 374: 2019 i/c all amendments. 1200 mm sweep 20.00 NO 1697.00

19 SOR Item No. - 6.15.3

Supplying, installation, testing and commissioning of following LED fitting (luminaries) Panel Light in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 40.00 NO 528.00

20 SOR Item No. - 9.28

Providing and fixing 27.5cm long wire spring for rolling shutters. 8.00 NO 352.00

21 SOR Item No. - 6.21.1

Supplying, installation, testing and commissioning of following LED tube light fitting {Inverter Type: with builtin battery backup} i/c batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification. IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 40.00 NO 997.00

22 SOR Item No. - 8.13.3

Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade,commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 6.99 SQM 1197.00

23 SOR Item No. - 12.50

15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) 90.00 SQM 1796.00

24 SOR Item No. - 12.7.2

Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours , shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm i/c pointing in white cement mixed with matching pigment complete. 95.04 SQM 946.00

25 SOR Item No. - 12.3.2

Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick 1050.00 SQM 254.00

26 SOR Item No. - 19.42

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 8000.00 SQM 7.30