COMPREHENSIVE MAINT BHAGAT COLONY AREA OF AGE B/R-I UNDER GE N BIKANER AT MIL STN BIKANER

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

M&LSand stone slab 25-35mm thick set jointed and pointed self faced punched dressed laid as in chhajas, sunshade and man holes covers set in cement mortar 1:4 incl.making chases in wall including dismantling of exhisting rcc /stone complete all as specified.

M&L brick work with fly Ash bricks straight or curved on plan to any radius built in CM 1:6 including Demolition of brick/stone masonry built in CM all as specified and directed.

M&L for Rendering 10+5 mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth any hight of building without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete and also including scaffolding and Taking down cement plaster, any description on brick or stone or cement concrete walls all as specified. (Water proofing compound to be measured and paid for separately).

Supply only liquid water proofing compound ISI marked @ 200ml per 50Kg of cement content.

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement including Taking down cement plaster, any description on brick or stone or cement concrete wallsall as specified.

M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement incl Taking down cement plaster, any description on brick or stone or cement concrete walls all as specified.

Providing and Laying glazed ceramicDark shade/ Double charged/ultra charge vitrified tiles 600 x 600 x 8 to 9mm thick square or rectangular, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor, tiles laid over and including 20mm thick bedding layer confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement including dismantling floor,hearth or wall tiling including cement mortarcomplete all as specified and directed by Engineer-in-Charge.

Ditto all as above item No 8 but as in skirting over 10 mm cement screed bed backing ( 1:3) complete all as specified and directed by Engineer - in - Charge.

M & L for glazed ceramic tiles (coloured) 450x300x7mm thick on vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 10 mm thick rendering in Cement Mortars 1:4 on fair faces of brick work or concrete surfaces including dismantling floor,hearth or wall tiling including cement mortarcomplete all as specified and directed.

M & L for non skid ceramic colour (light shade) joint free tiles with matt finish size 400x400x7mm thick ( square/ rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. confirming to IS-15477:2004 including necessary cutting as per site requirement including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes includind dismantling floor,hearth or wall tiling including cement mortar complete all as specified.

M&L Baroda green marble 15mm thick with polishing, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in platform and including screed bed of 20mm thick in cement mortar 1:4 laying floor /platform finishes including Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc also including dismantling floor,hearth or wall tiling including cement mortar Complete all as specified and directed

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection complete all as specified.

Mild steel framed work such as grills, gratings, tank staging etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 all as specified .

S&F 3 mm thick sheet glass/frosted glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane including Hacking out old broken glass (any thickness size quality or desc.)from wooden frames or stone conc. or brick surroundsglazed with putty or fixed with beads all as specified

M & L for water proofing treatment to RCC sunken slab and adjoining vertical slab as described following any one method Method 1 (A) - Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent , having 100 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5.Clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 Cement : 1Polymer : 4 Sand).Making Gola of size 75X75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 . (1 Cement : 1Polymer : 4 Sand). The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc., complete as per manufacturers specifications. (B) Bore Packing: All the borehole gaps between concrete surface and pvc pipe of various dia upto the neck level shall be filled with non-shrink free flow grout - SmartCare GP Grout or approved equivalent having dual shrinkage compensation property.

Before the bore packing, surface of the pvc pipe and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (c) Apply 12-15mm 1:3 cement plaster on slab and vertical surface admixed with SmartCare Vitalia Neo @200ml per bag of cement Method 2 (A) Providing & applying two component cementitious & acrylic flexible waterproofing & protective coating, two coats with 1mm DFT, having Hydrostatic (positive) water pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sqm or equivalent with a paint brush over existing roof surface. The Polyester reinforced coated net of 45g/m2, 2.5mmx2.5mm is Laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k or equivalent. After removal of all loose materials like dust etc. With wire brush coir brushes from roof surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based repair mortar/micro concrete, repairing with 15 mm thick cement plaster after the repairing work making the gola on surrounding wall’s junction and seal the vertical walls up to 2100 mm. In case of core cutting on the surface, the joint is seal with non-shrink grout. The work complete as per the direction of Engineer-in-Charge. (Work shall be executed through specialized agency)

M&L plain cement concrete type D2 1:4:8 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete such as sunken floors

Supplying and laying of 20 mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing 15 mm/20mm bore with connections removing to store yard complete all as specified

Supplying and laying of 25 mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down steel tubing 15 mm/20mm bore with connections removing to store yard complete all as specified

S&F in repair 20mm/ 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S&F Vitreous china wash down water closet Orissa pattern white padestal pattern of size 550x440mm including integral foot rest excluding flushing cistern and flush pipe) incl. P or S trap comp all as specified and fixed in repairs. Make Parryware/Cera/Hindware

S&F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, and flush pipe ,incl P or S trap including seat cover Spray jet ,brass chromium plated ,with and including 1.5 metre long PVC flexible reinforced pipe for EWC ,for bore dia of pipe 15mm ,comp all as specified and fixed in repairs.

S&F in repairs PVC flushing cistern 10 ltrs capacity incl flushing pipe and connections complete. as approved by Engineer in charge,low level, white with inlet, ball valve ,complete including connection to pipe all as specified.

S&F vitreous china wash hand basin white flat back, size 550x400 including cp waste coupling with pvc waste pipe and include 15 mm bore Brass CP mixer for mixing hot & cold water etc complete all as specified.

S & F in repair sinks made of stainless steel 1.0 mm thick kitchen sink without drainage board, plugs washers and waste copling including bedding in cement mortar to dwarf wall or including supply and fixing cantilever brackets of MS angles and connecting union to 800 mm long PVC waste flexible pipe 40 mm dia, over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.

S&F stainless steel plate racks, glossy finish, for kitchen overall size 600mm x750mm complete fixed in position as recommended by manufacturer with SS screws/fasteners etc all as directed.

S&F in repair chromium plated Bib Tap, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule, fancy type, CP, 15mm dia complete all as spfd.

S&Fin repair 15mm bore PVC connection with PTMT nuts length 450 mm/600mm complete all as spfd.

S & F in repair angle valve cock (one way /two way as directed) chromium plated fancy type half/full turn for iron pipe 15 mm bore screwed down high pressure, with capstan head, screwed both ends for iron pipe or for union complete all as specified & directed.

S&F in repair Brass chromium plated shower rose 125 mm size with and incl shower arm complete all as specified & directed.

S&F in repair 15 mm bore brass fancy concealed type stop valve chromium plated with long shank and cup complete screwed for iron pipe

S&F in repair 32 mm/40mm size cp waste coupling incl waste Pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as spfd.

S&F of Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm/25mm complete all as spfd.

S&F in repair health faucet with 1 mtr long tube and hook and knab all as specified and directed by Engineer-in-Charge

S&F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor or fixed to wall including stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts incl dismantling cast iron /PVC pipes in any position all as specified and directed

S&F 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor or fixed to wall including stack clamps out of 100mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts dismantling cast iron /PVC pipes in any position all as specified and directed

S&F of 110 mm bore PVC (SWR) bend or ,(Single T) equal or unequal Provided with access door complete all as specified

S&F of 75 mm bore PVC (SWR) bend or ,(Single T) equal or unequal provided to access door complete all as specified

S&F 75 mm bore PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified

S&F 125/110 mm bore PVC(SWR) gully trap, plain with grating including jointing with solvent cement complete all as specified

S&F PVC (SWR) vent cowl for 75mm dia pipe complete all as specified

S&F PVC (SWR) diminishing pieces or Reducers/ Sockets 110 mm/75 mm bore complete all as specified

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer. all as specified.

M&L for Preparing plastered or unplastered surfaces of ceiling/wall including complete removal of existing treatment by mechanical equipment like electric sander and applying two coats of oil bound distemper over a coat of wall care putty, white or tinted complete all as specified and directed by Enginner in charge.

Material & labour for applying two or more coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, alkaili & fungul resistance dirt resistance exterior paint of required shade(company depot tinted) with silicon additives @ 1.43liter/10 sqm over and including priming coat of exterior primer applied @.90 liters/10 sqm over surface complete all as specified and as directed by Engineer-In-Charge.

Taking down chowkhats or frames not exc. 1.50 sqm each but with shutter (w/o taking of shutter from the frame ) including Windows /ventilators complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

Taking down chowkhats or frames exc. 1.50 sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and refixing in the same opening including repairs and easing/adjustment to existing shutter complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and romoving to store complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

S & F in repairs stainless steel tubular curtain/drapery rod 25 mm dia ( in length as directed) with & including pair of projecting type fancy stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on wall/beam complete all as specified and as directed .

S&F as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F 4.8 mm thick sheet glass/frosted glass ordinary quality and glazing with oil putty fixed in window or ventilator complete all as specified

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

S&F Flush Shutters 35 mm thick , solid core construction, with block board core and plywood face panel , commercial type on both side complete. Including edges of door covered with teak bid and makng provision for fixing mortice lock if required and hinges including both face is covered with decorative face veneer with lipping /frame to match including supply and fixing ss tower bolt,ss handle,ss door stopper,ss sliding door bolt etc complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification including all necessary stainless steel fitting complete all as specified and directed by engg in charge

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed .

Ditto all as per item No-59 above but single extruded & size of WPC Chowkhat/frame of size 65 x 125mm complete all as specified and as directed

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed/gauge skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including S&F of stainless steel 304 Grade (natural finish) wire cloth, all as per direction of Engineer- In- Charge including supply and fixing following items :

(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm -3 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf (f) Stainless Steel (304 Grade) wire cloth fixing as per manufacture (g) 300mm mild rat tail rod pattern springs including roller and, roller plate

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Repair of Iron door/gate of any type any height and anylength making functional by providing greasing oiling , welding etc.including taking down iron door/gate or hood if required complete all as specified and as directed.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or +F9:F16ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed. M & L for Modular point wiring with and including single core FRLSH PVC insulated and unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade drawn through and including suitable size of PVC concealed conduit with accessories with laminated top cover fixed on MS sunken box for housing of switch, socket, regulator etc complete with and including 1.5 sqmm FRLSH PVC insulated and unsheathed stranded copper conductor cable as earth wire and connected to common earth dolly and making good to the disturbed surfaces of wall, floor, ceiling etc and making good to the disturbed surfaces of wall, floor, ceiling etc to match with exisiting surface complete all as specified and as directed by Engr-in-Charge as per following. Note :- (i) Cost of cutting/leaving forming chases for conduits, sinking for modular metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed to include for moduar metal flush boxes of requiste module and modular cover plates with frame of requisite module of colour as approved by GE. (a) One Light/fan/ex-fan point controlled by one switch.

(b) one socket point on the same board with other switch complete.

(c) One 3 pin 5 amps socket on independent board.

Ditto all as per item No-66 above but with 2.5 sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed by Engr-in-charge.

Ditto all as per item No 66 above but but one light point controlled by two 02 way switch board complete and all as directed by Engr-in-charge.

Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed. M & L for submain (single phase) wiring complete with and including 6.0 sqmm two single core,(FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through Existing PVC conduit including accessories and fixed on walls and 6 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr Note :- (i) Two runs of 6.0 sqmm PVC insulated wire and one run of 6 sqmm wire and one run of PVC conduit shall be measured as one unit length.

Ditto all as per item no 67 but submain (single phase) wiring complete with and including 6.0 sqmm two single core,(FRLSH) fire retardant, PVC insulated and unsheathed multistranded copper conductor cable, 1100 Volts grade, drawn through PVC concealed conduit of suitable size including accessories and fixed on walls and 6 sqmm, fire retardant, PVC insulated, multistranded copper conductor cable for earthing and connected to common earth dolly complete all as specified and as directed by Engr-in-Charge.

Taking down old U/S existing DB any type including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed. S&F MCCB TPN DB,4 way Vertical type,440V,3 phase with rated busbar 200 Amps, double door type suitable for MCCB as a incomer and MCBs as out going double door type ,grouted in walls with Fixing arrangemant complete all as specified and directed. Make-Legrand cat No-5077 50 or equivalent in C&S,Havells, bentex.

Ditto all as per item no 68 above but double door, sheet metal enclosure, powder coated for MCB DB SPN 12 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991

Ditto all as per item no 68 above but double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

Ditto all as per item no 68 above but double door, sheet metal enclosure, powder coated for MCB DB SPN 4 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB SPN, 6-32 Amps , 240/415 volts, breaking capacity 16KA in replacement complete all as specified and as dircted by Engr-in-charge.

Ditto all as per item no 69 above MCB SP, 6-32 Amps , 240 volts, breaking capacity 10KA in replacement complete all as specified and as dircted by Engr-in-charge.

S&F MCCB 40 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA in replacement complete all as specified and as directed by Engr-in-charge.

Ditto all as per item no 70 above but MCCB 63 amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

Ditto all as per item no 70 above but MCCB 100 amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

Ditto all as per item no 70 above but MCCB 125 amps, 4 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

Ditto all as per item no 70 above but MCCB 63 amps, 3 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

Ditto all as per item no 70 above but MCCB 100 amps, 3 pole, 415 volts, overload and Short circuit adjutable type breaking capacity 25 KA .

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts complete all as specified and as directed by Engr- in -charge. Make-Havells SAP Code AHFSXXW061, Legrand Cat no- 679200, C&S Cat no- CG2011PWNR.

Ditto all as per item no 71 above but switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts . Make-Havells SAP Code AHFSXXW161, Legrand Cat no- 679209, C&S Cat no- CG20573PWNR.

Ditto all as per item no 71 above but Bell push Modular type, 6 Amp, 1 module single pole , 230 Volts . Make-Havells SAP Code AHRSBXW061, Legrand Cat no- 679229, C&S Cat no- CG20509PWNR.

S&F socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge. Make-Havells SAP Code AHFKCXW163, Legrand Cat no- 679218, C&S Cat no- CG20352PWNR.

Ditto all as per item no 72 above but socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts. Make-Havells SAP Code AHFKPXW063, Legrand Cat no- 679235, C&S Cat no- CG20370PWNR.

supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge. Make-Havells SAP Code AHLREFXW005, Legrand Cat no- 679241, C&S Cat no- CG20826PWNR.

S&F in repair modular white cover plate with frame but 1 module complete all as specified and as directed.

Ditto all as per item no 74 above but 2 module .

Ditto all as per item no 74 above but 3 module .

Ditto all as per item no 74 above but 3&4 module .

Ditto all as per item no 74 above but 6 module .

Ditto all as per item no 74 above but 8 module .

S&F in repair modular metel flush box but 1,2, module to suit as existing make complete all as specified and as directed Note :- (i) Cost of cutting/leaving forming chases for conduits, sinking for modular metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) making good to the disturbed surface of wall ,floor,ceiling etc to stretch with existing surface.

Ditto all as per item no 75 above but 4 module .

Ditto all as per item no 75 above but 6,8 module .

M&L single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified & directed by Engr-in-Charge. Make :- ABB/C&S/Legrand

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified & directed by Engr-in-Charge.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with LED bulb 9watt complete all as specified & directed by Engr-in-Charge.

S&F LED tube light fitting, 20 watt/10 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm.

Taking down fan,sealing cable end,dismantling blades and removing fan and blades & refixing ceiling fan of any make, any sweep , keeping side in store in safe custody for painting of ceiling fan complete,in situ with synthetic enamel paint by spraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete including writing MES No at the site.

Taking down Exhaust fan,sealing cable end,dismantling blades and removing fan and blades & refixing Exhaust fan of any make, any sweep , keeping side in store in safe custody for painting of Exhaust fan complete,in situ with synthetic enamel paint byspraying including filling cavities with filler,one coat after cleaning all dust and reassembling the fan complete including writing MES No at the site.

Removing and refixing water heater storage type, puff insulation type of 25 ltrs capactiy and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary fixing arrangement complete all as specified and directed.

M&L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, earth electrode, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per all as specifed and directed.

PU water proofing treatment - 1-Removal of exiting PCC/brick Bat coba/Mud phuskar/ App Membrane from the roof stacking the reusable material and disposal of unserviceable rubbish outside the campous as direction by engr in charge but outside in 3Km (applicable for maint old work) 2- 15 mm thick rendering in CM 1:4 over existing/ old RCC slab/ surfaces after dismantling /demo/taking down roof treatment. 3-Cleaning of surface of loose dust and grit and cement slurry etc. by means of wire brush dust removing and scrapper etc .Pot holes/cracks shall be repaired with cement admixed with polymer as per manufacturer instructions 4-Providing PCC coving /gola along vertical parapets of size 75 mm x 75 mm with concrete mix (1:2:4) type B1 using WPC of approved make etc complete all as specified and directed by Engg In Charge. 5-The surface shall be treated with PU Elastoseal primer with Epoxy primer to seal the pores and enhance the adhesion of the coating,supplying and applying single component waterproofing liquid membrane based on pure,elastomeric,polyurethane resin

cold applied of spray/brush applied membrane with an elongation of (650%+,- 50 ) and tensile strength not less than 2 Mpa ,crack bridging ability not less than 2 mm.No leakage upto 5 bars of water pressure.shore hardness > 50 shore. The Minimum thickness to be applied shall be 1.5 mm,( overall )in two layers (each layer 750 micron) or as per manufacurer's instructions so as acheive thickness not less tha 1.5 mm. 6-Providing and laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75 mm before laying SRI Roof tiles . 7-Providing and laying SRI (Sun Resistance Index ) roof tiles (size 300x300x9-10 mm) with 20 mm thick cement plaster in CM (1:4) mixed with liquid WPC as per manufacturer's instructions confirming to required slope Makes of PU Primer /Membrane :- SIKA/BASF,BERGER/STP FOSROC/ SAINT GOBIN /PIDILITE

General Note :- 1. Reapir and maintanace intimated to the contractor or his rep at any time day or night, through complaint slip or telephonically must be rectified by the contractor within 8 Hrs. If contractor fails to rectify the fault with in 8 Hrs a panelty of Rs 200 per day per complaint will be deducted till the fault/complaint is rectified. 2. All Material required for the repair and matainance work considered in the CA will be made available by the contractor with in 3 Hr. 3. Contractor will arrange two teams of electrician and helper inside of the cantonment for rectification of complaints 24/7 Hours through out the contract prrovision. 4. Contractor will deposit at least 90 % of material on immediate acceptance of the contract included in this contract in MES Store and same will be issued based on the complaint cell. 5. All item retrieved from replacement will be deposited to MES store and cost of same shall be included in quoted rate

HARPREET SINGH CONTRACTOR (BID ID -3386919)

M S GROUP (BID ID -3395980)

BIG B CONSTRUCTION (BID ID -3395742)