Provn of PCC flooring at MT area including Veh washing point of 22 Garh Rif and certain sanctioned works under GE (East) Fzr Cantt.

Amount

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil. Complete all as specified and directed.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning, filling in including spreading leveling, watering and wall ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed

M&L for Cement concrete Type E-2 (1:5:10) 40 mm graded aggregate in Foundations filling and mass concrete complete all as specified and directed.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) 100mm thick for hardstanding complete all as specified and directed.

M&L for Forming contraction( Dummy Joints 65mm deepx10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

Excavation in tenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation and getting out in soft/loose soil Complete all as specified and directed.

M&L PCC 1:4:8 type D2 ( using 40mm graded stone aggregate ) as in foundations, filling and mass concrete etc complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in CM 1:4 complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landing, Chajjas and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of conctete flats, treads, breaks in floors, window cills, concrete rialings, openings in conctete walls, floor and roofs horizontal or slopping and similar work exceeding 10cm but not exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L TMT bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per srl item No. 12 here in before but 6mm to 8mm dia complete all as specified and directed.

All as per item No 12 hereinbefore but 8mm TMT bars as in stirrups, spacing and binders etc. complete all as specified and directed.

M&L RCC nominal mix type B1 1:2:4 ( using 20mm graded crushed stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L rendering 15mm thick plaster in CM 1:6 on fair faces of brick work/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L two coats of cement base paint over one coat of cement based primer on walls including preparation of surface complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed portion embeded in concrete, brick work, masonry etc complete all as specified and directed.

Dismantling fencing wiremesh any type Complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate. Complete all as specified and directed.

M&L for use & waste wooden form work (rough finished) to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs, etc also splays between floors and beams, etc Complete all as specified and directed.

M&L Cement concrete (1:1.5:3), type A-1 using 20mm graded stone aggregate as in chajja supported on walls, beams, roofs, landings, balconies, canopies, and in shelves and the like Complete all as specified and directed.

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius Complete all as specified and directed.

M&L PCC type C1 (1:3:6) using 20 mm graded crushed stone aggregate as in bed block & coping Complete all as specified and directed.

S&F for mild steel work as in Post & struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work confirmingto Fe -290 Gde E-165 Complete all as specified and directed.

M&L for painting to new steel surfaces of any description, over 10cm width or girth in two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces Complete all as specified and directed.

S&F GI 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standared rails straining bolts secuning or tying at crossing with and provison of GI mild steel wire staples or steel pins etc Complete all as specified and directed.(each line of wire to be measured)

GS and Co

Kissan contractor and engg works

HAPPY ELECTRICALS

AKASH ELECTRICALS

M/s Surjit Singh and bros

JAWAHAR CONSTRUCTION COMPANY

KAILASH CONSTRUCTION COMPANY

M/s S B Construction Company