GE(P)AF/GUR-28/2021-22 SPECIAL REPAIRS TO CERTAIN GARRAGES, BLDG NO T-3, T-4, T-8, POL STORE, PROVN OF SUN SHADE TO STORAGE SECTION AT 27 ED AND WATER SUMP OF SEKHON VIHAR AT AF STN PALAM UNDER GE( P) AF GURGAON

Amount

Schedule-A

Desilting and cleaning of earth/Mud, Scaling on wall and floor for 7.50m depth under Ground Sump and cleaning with clean water for further repairing and removing of all debris out side the MD land complete all as specified and as directed by Engr-in-charge.

M&L for cleaning the surface of RCC wall and floor surface with wire brush, scraping loose cover of concrete, detecting the sources of leakages for repairing complete all as specified and directed by Engr in Charge.

M&L for drilling 15mm holes into the RCC wall/Slab up to 75mm or D/2 as per site requirement and fixing the metallic packer of dia10/12mm dia Aqua TP grouting Nipple and sealed as per manufacturers instruction all as specified and as directed by Engr in Charge.

M&L for grouting of grouting material in Nipple/Metalic Packer using DR MIRACLE WAC @ 5Kg/Sqm of grout, prepared by mixing DR MIRACLE WAC powder with water as per manufacturer and 2% DR MIRACLE RETROMER (part-B) to make grout material and applying by grouting pump @ 5-7 Kgf/SqCm pressure and as per manufacturer instruction complete all as specified and as directed by Engr-in-charge. These operations shall be done by authorised applicator as approved by GE.

M&L for drilling 20mm holes into the RCC Raft/Floor up to 75mm or D/2 as per site requirement and fixing the metallic packer of dia19mm dia Aqua TP grouting Nipple and sealed as per manufacturers instruction complete all as specified and as directed by Engr-in-charge.

M&L for grouting by three stage methodology for grouting by using DR MIRACLE SS/WAC/RTF powder mixed with water and add 2% DR MIRACLE RETROMER (Part 'B') and grout the material @ 25Kg/Sqm material by grouting pump @ 10 to 12 Kgf/SqCm pressure and as per manufacturer instruction complete all as specified and as directed by Engr-in-charge. These operations shall be done by authorised applicator as approved by GE.

Removing/Cutting of Packers/Nipple and making good in CM 1:3 and level the wall and floor surface without damaging structural elements complete all as specified and as directed by Engr-in-charge.

M&L for application of two coats of polymerized cementious water proofing coat by using DR MIRACLE HYFLEX (2 component) @ 4.0 Kg/Sqm (1.50Kg Polymer: 2.50Kg DR MIRACLE Part 2) complete all as specified and as directed by Engr-in-charge. These operations shall be done by authorised applicator as approved by GE.

Demolition of cement concrete of any description and in any position complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster of any description on brick walls or on concrete surfaces including racking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick in CM 1:3 mixed with water proofing compound @ 2% by weight of cement/or as per manufacturer instruction, surface finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. (Water proofing compound will be measured and paid separetely)

Supply only water proofing liquid compoundcomplete all as specified and directed by Engr-in-Charge. :Make : DR. FIXIT PIDE PROOF LW, CICO, FOSROC.

M&L for 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in Apron, hard standing and floor finished even and smooth without using extra cement laid in panels not exc 4sqm each and 8mm wide joints shall be filled with sealing compound Gde-A complete all as specified and as directed by Engineer-in-Charge.

M&L for applying evenly two coat cemetious/liquid waterproofing coating as per manufacturer instructions including cleaning surface complete all as specified. Make :- SIKA/FOSROC/STP/CHOKSEY CHEMICAL/APURVA INDIA/BOSTIK INDIA/STP/MARUTI BITUMEN.

Dismantling of mild steel work of any description not other wise provided for MH frame and cover including removing to the store complete all as specified and as directed by Engineer-in-Charge.

M&L for Mild steel framed work as in door frame and cover of manhole of water tank, valve pit etc by using MS of grade Fe-290 (Gde - E 165) including cutting, welding, purpose made hing, locking arrangement and MS covering sheet complete all as specified and as directed by Engr-in-charge.

M&L for applying two coat synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel and iron surfaces exc. 10Cm in width or girth complete all as specified and as directed by Engr In Charge.

Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MOD land, complete all as specified and directed.

M&L for 15 mm thick cement plastering in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately.

Cleaning top surfaces by brooming, wire brushing, removing grass, raking out joints to receive plaster and removing debris, grass etc outside the defence land complete all as specified and directed by Engineer-in-Charge. Note :- 1. Plaster shall be measured and separately under appropriate item of Sch ‘A’. 2.Rate of this item is inclusive of diconnect fitment at water tank or solar heater etc and refixing in the same position after compeleting of roof treatment.

M&L for water proofing treatment of roof consisting as under:- (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified. (c) A layer of 3mm thick APP polymeric membrane of weight not less than 3.00 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed by Engr-in-charge.

Supply only 38mm wide and 3mm thick glass diving strip including fixing in position complete and all as specified and as directed.

M&L for 75mm thick PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in Floor/hard standing in line and laid in panel including tamping and top surface make rough, whilst the concrete is green complete all as specified and as directed by Engineer in Charge.

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including skefolding and all safety measures)

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.

M&L for 10mm thick rendering in CM 1:4 on concrete Ceiling surfaces including finish even and smooth w/out using extra cement complete all as specified and as directed by Engineer in charge.

M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newely plastered Wall surface and applying three coats of white wash complete and all as specified and as directed.

M&L for preparation of newely plastered ceiling surface and applying three coats of white wash complete and all as specified and as directed.

M&L for preparing new plastered wall surfaces by brooming down or steel wire brusing, scraping down and applying two coat of exterior emulsion paint 100% acrylic of approved colour and shade by accepting officer complete over a coat of primer and over 2 to 3 mm thick birla putty punning complete all as specified and directed by Engineer-in-charge. Make-Asian (Apex Ultima), Berger (Whether coat long life) and equivalent including necessary scaffolding upto 4th floor.

M&L for Mild steel work as column etc. for frame work of rafter/purlin for roof including cutting welding and all necessary drilling,bolting or riveting etc. Complete conforming to Fe 410 W as in replacement complete all as specified and directed by Engineer-in-charge.

Dismantling Plain or corrugated steel sheeting any guage, thickness, including removing complete all as specified and directed by Engineer-in-charge.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks including dismantling of existing sheet in any position complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coping, benching, bed block, window cills etc complete all as specified and as directed by Engr-in-charge.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

M&L for 20mm thick prepolished granite (any type) slab laid with 15 mm thick CM 1:4 bedding in door Cill, plateform etc in floor and skirting/dado surface and jointed with grey cement slurry and pointed in white cement with pigment to match the shade of granite stone including Moulding/rounding and polishing complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) as in plinth protection and court yard, finished cement surfaces even and smooth with out using extra cement in panels and providing grooves fealed with bitumen sand mixture complete all as specified and directed by Engineer-in-charge.

Taking Down old unserviceable rolling Shutter/Steel Gate of area n exc 25 Sqm each of any description and refixing after over hauling including, necessary welding of iron flats, replacement of bottom strips, replacement of springs, replacement of Gear, replacement of ball bearing, replacement of MS Sheet Hood, making good surfaces, applying two coat Synthetic enamel paint over a coat of primer and refixing with smooth functioning complete all as specified and directed by Engineer-in-charge.

M&L for Complete removal of existing old treatment by scraping down with steel brush/steel patty preparing old plastered surface of walls and applying two coats of white wash complete all as specified and directed by Engineer-in-charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and removing complete all as specified and directed by Engineer-in-charge.

M&L for GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30 mm web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intrmediate channel 0.90 mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofits at approx 900 mm centre to centre with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurld web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate chennel with connecting clip across the intermediate chennel at 600 mm centre to centre, complete all as specified and directed by Engineer-in-charge.

M&L for 12mm thick Glass reinforced Gypsum Board (GRG) as in false ceiling fixed in grid as per manufacturer's instructions, complete all as specified and directed by Engineer-in-charge.

Dismantling of CGI/GI/Galvalume/AC sheet from the roof of any description and removal complete all as specified and directed by Engineer-in-charge.

Dismantling timber scantling 40Sqm cm and over in section an any position including removing to store complete all as specified and directed by Engineer-in-charge.

M&L for mild steel rolled section as in main and cross beams hip and jack rafters; purlins where conneted to common rafter and running rails and guides for sliding door fixed with angle cleats or other connecting plates, Fe 290-W (Gde-E-165) complete all as specified and directed by Engineer-in-charge.

S&F pre painted galvanised aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

S&F in repair for Aluminium Composite Panel of 3 mm thick exterior grade in wall/column panelling/cladding with PVDF coating over aluminium frame of section 37.5 mm x 25 mm x 1.6 mm (16 guage) fixed on the wall complete as per manufacturer's instruction colour/texture/pattern as directed by Engr-in-Charge. Make : Alles or Equivalent as approved by GE.

M&L for Sealing of J hooks by epoxy sealent as approved in GI sheet roofing,including removing of washer/nut/bolts and fixing new bolt as required complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered wall surfaces/Old decorated surface after scrapping and applying two coats of Distemper Oil Emulsion by Auto roller over putty and primer as required after complete removal of existing treatment/newely plastered surface including applying 2 to 3mm thick wall care putty all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered ceiling surfaces and apply two coats of Distemper Oil Emulsion over putty and primer as required all as specified and as directed by Engr-in-Charge.

Dismantling of floor, hearth or wall tiling including cement morter bedding and (but not backing), and rubbish off the premises, complete all as specified and as directed by Engr-in-charge.

M&L for Non–Skid Ceramic Coloured Tiles, size 300x300x7 or 400X400X7 to 8mm, Laid on floor, over and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed by Engr-in-charge.

M&L for Glazed Ceramic Coloured Tiles of size 300X450X7mm to 8mm, set on vertical surfaces such as Skirting, Dado, etc, over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White Cement with pigment to match the shade of the Tiles, complete all as specified and as directed by Engr-in-charge.

S&F for 25 mm dia SDR-11 CPVC pipe fixed to concealed in wall, ceilling, laid in floor etc incl all fittings and jointing with solvant and brass threaded fittings for fixing taps etc including Taking down unserviceable Steel Water Tubing with Fittings and Connections, etc., complete all as specified and as directed by Engr-in-charge.

S&F in repairs water closet Pedestal pattern vitrous china wall mounted with flushing cistern integrated type, seat cover and internal accessories (including ‘P’/'S' trap) white colour of make Coral of Hindware Cat part No 20040 or equivalent/makes specified in list of makes and fixed as per manufacturers’ instructions and complete all as specified and as directed by the Engineer in Charge.

S&F in repair Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Couplin, UPVC 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed by Engr-in-Charge.

S&F in repair Bib cock , CP brass long body with capston head suitable for 15mm dia complete all as specified and directed by Engr in charge. Cat part No: MMO-1020A of Make-marc or equivalent out of makes specified in list of makes.

S&F in repair pillar cock, CP brass capston head with Hot/Cold on top complete all as specified and directed by Engr in charge. Cat part No: MMO-1020A of Make-marc or equivalent out of makes specified in list of makes.

S&F in repair, CP brass angle cock with Capston head suitable for 15mm dia complete all as specified and directed by Engr in charge. Cat No-MOR-1060A of Make-Marc/Prima or equivalent out of makes specified in list of makes.

S&F in repair, 15mm dia High pressure connection pipes 24" longwith chrome plated Check nuts with washer, complete all as specified and directed by Engr in charge. Cat No-AE-06 of Make-nixo/Shakti or equivalent out of makes specified in list of makes.

Excavation in post holes n exc 0.5 cum each, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, ramming and removing surplus soil to a distance n exc 50 m and making good surface for soft/loose soil, completed all as specified as directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc., all as specified.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified.

Taking down carefully copper/aluminium sub main wiring ( socket or power) complete including fixture and fittings removing material to store for keeping in safe custody for taking credit ( credit for above items shall be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc including white/colour wash to match wall surface complete all as specified and as directed by Engr-in-Charge.

Taking down of old unserviceable copper / aluminium point wiring (light, fan, socket or power) complete including fitting & fixture such as switches, ceiling roses, pendants, regulators, sockets,g etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc complete.

M&L wiring sub main wiring concealed along with earth wire with the following size of HRFR PVC insulated and unsheathed multistranded copper conductor single core cable in concealed through 25 mm rigid not metallic PVC conduit heavy duty with 2 x 4 sqmm + 1 x 2.5 sqmm earth wire complete all as specified and directed by Engineer-in-charge. including cutting chesses pinning in making good to facing and pointing in cement morter 1:3 to the ends or cutting chesses for conceled point wiring and making good distrubed surface complete cutting not exceeding 4 cm girth and 4 cm width. Note:- Two run of cable and one length of PVC conduit with earth conductor shall be measured as a one length complete all as specified and as directed by Engr-in-Charge.

Material and labour for point wiring concealed in and including rigid non metallic PVC conduit, medium grade, ISI marked, 20 mm dia, with 1.5 sq mm FRHR PVC insulated & unsheathed, multi stranded copper conductor cable, single core, 1100 volts grade, including flush metal terminal boxes and factory fabricated (same make of modular type switches and sockets etc.) modular metal box, cover plates inner & outer, frames of suitable size and depth for modular wiring, FRHR insulated and unsheathed Multi standared copper conductor of 1.5 sqmm and connected to common earth dolly as continuous earth wire (Contractor shall concealed the conduit by making chases by cutter machine then after chiselling only) for one light point controlled by one switch complete all as specified and as directed.

S&F Switch modular 10 Amps, single pole one way complete all as specified and directed by Engineer-in-Charge.

S&F Replacement of DB DD TPN 415 Volts 04 ways double door vertical type load line DB fixed on MCCB complete all as specified and as directed by Engr-in-charge. Note : MCCB Paid Seperately.

S&F MCB, SP, Breaking capacity min 10KA,'C' curve 230V, 6 to 32 Amps complete all as specified and as directed by Engr-in-charge.

Labour only for taking out unserviceable DBs by carefully disconnecting the existing connections, complete all as specified and as directed by Engr-in-charge.

Material and Labour only for cleaning and reconnecting old unserviceable point wiring to LED fitting and fixtures mounted in ceiling or wall by making serviceable existing point wiring by replacement of old unserviceable lugs, cleat or any other accessories complete to render the point wiring serviceable and making relevent connections to switches etc. complete all as specified and as directed by Engr-in-charge.

M&L for recess/ surface mounting LED flat panel 2'X2' light fitting, fabricated out of CRCA sheet steel housing duly powder coated with high efficient LEDs & glare free full opal diffuser, IP20 complete with all accessories internally pre-wired and including conneting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-charge. Make: Halonix, CAT No: HLFPR22-02-36 CW-R or equivalent of Bajaj/Philips/CG)

M&L for flameproof LED luminaries 1 x 16W/20W, CMRI Certified, recommended for gas/vapour group of IIA & IIB, and for zone 1 & 2 with IP 65 protection complete with suitable lamp and all accessories internally pre-wired and including conneting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-charge. (Make: Crompton, CAT No: EXTN1LT8-16/20 or equivalent of Bajaj/Philips/Halonix)

Note The amount of Rs 59,365/- against Schedule of Credit on Page No 141 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

M/S PRADEEP ENTERPRISES

Sumit Enterprises

JAIPAL and BROS