Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAccepted-AOC | ₹2.9 Cr | L1 | Accepted-AOC Being lowest and reasonable |
| 2 | L2₹3.3 Cr+₹40.6 L (14.0%)Rejected-Finance | ₹3.3 Cr+₹40.6 L (14.0%) | L2 | Rejected-Finance Not being lowest |
| 3 | L3₹3.5 Cr+₹55.6 L (19.1%)Rejected-Finance SHREE KUNJ HOUSE NO 22B JIBAN KRISHNA PATH NEAR L P SCHOOL HENGRABARI GUWAHATI PIN 781036 | GUWAHATI | KAMRUP | ASSAM | 781036 | ₹3.5 Cr+₹55.6 L (19.1%) | L3 | Rejected-Finance Not being lowest |
| 4 | L4₹3.5 Cr+₹57.5 L (19.8%)Rejected-Finance C O GUPTA EMPORIUM AR BAZAR HAPPY VALLEY SHILLONG 793 004 | EAST KHASI HILLS | MEGHALAYA | 793004 | ₹3.5 Cr+₹57.5 L (19.8%) | L4 | Rejected-Finance Not being lowest |
| 5 | L5₹3.6 Cr+₹71.1 L (24.5%)Rejected-Finance BANSAL BHAWAN STATION CHARALI AT ROAD SIVASAGAR ASSAM 785640 | SIVASAGAR | SIVASAGAR | ASSAM | 785640 | ₹3.6 Cr+₹71.1 L (24.5%) | L5 | Rejected-Finance Not being lowest |
Tender Value
Refer Docs
EMD Value
₹4.1 L
Closing Date
1 Feb 2021, 6:00 pmClosed
Chief Engineer Shillong Zone
HQ CE Shillong Zone, SE Falls, Shillong-793011
CONSTRUCTION OF DOUBLE STORIED ACCOMMODATION AT CSD DEPOT NARANGI UNDER GE GUWAHATI
2020_MES_387524_1
CESZ/NAR/06 OF 2020-2021
Open Tender
Civil Works
Lump-sum
365 days
NARANGI
As per tender document
2 documents required · 2 mandatory
₹2,000
GE Guwahati
₹4.1 L
13 Mar 2021
17 Oct 2020
3 Feb 2021
17 Oct 2020
1 Feb 2021
20 Jan 2021
19 Oct 2020 - 28 Oct 2020
Amount
NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.
Lumpsum price workedout by the tenderer for BUILDING & STRUCTURE WORKS as listed in Schedule ‘A’ Part-I
Lumpsum price worked out by the bidder/ tenderer for SITE CLEARANCE, SITE DEVELOPMENT, EXCAVATION AND EARTH WORK as listed in Schedule 'A' Part-II.
Lumpsum price worked out by the bidder/ tenderer for INTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-III.
Lumpsum price worked out by the bidder/ tenderer for ROAD AND PATH as listed in Schedule 'A' Part-IV.
Lumpsum price worked out by the bidder/ tenderer for AREA DRAINAGE as listed in Schedule 'A' Part-V.
Lumpsum price worked out by the bidder/ tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-VI.
Lumpsum price worked out by the bidder/ tenderer for DEMOLITION AND DISMANTLING as listed in Schedule 'A' Part-VII.
Sch 'A' Sec-VIII (Miscellaneous Items)Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 signifies this fact only.
M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for One light/fan point controlled by one,one way switch all as specified and directed by Engr-in-Charge
M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for One socket outlet point 6/5 A on independent board complete all as specified and directed by Engr-in-Charge
M & L for concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches & socket, including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for three light point controlled by one, one way switch 6 amps complete all as specified and directed by Engr-in-Charge
M & L for Concealed Point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for four light/exhaust fan point controlled by one,16amps one way switch all as specified and directed by Engr-in-Charge
M & L for Concealed Point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for five light point controlled by one,16amps one way switch all as specified and directed by Engr-in-Charge
M & L for Concealed Point wiring with 4 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including sunk mild steel terminal boxes with 3mm thick plastic laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for One 16amps socket outlet on independent board complete all as specified and directed by Engr-in-Charge
M&L sub main wiring (concealed type) single core FRLSH PVC insulated unsheathed cable, 1100 volts, grade having multi stranded copper conductor of 6 sqmm nominal cross sectional area each drawn into and all accessories including one No single core 4 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified & as directed by Engr-in-Charge. (Note - Two run single core cable, One run of earth conductor and one run of PVC conduit shall be measured as a unit length.)
M&L sub main wiring (concealed type) single core FRLSH PVC insulated unsheathed cable, 1100 volts, grade having multi stranded copper conductor of 4 sqmm nominal cross sectional area each drawn into and all accessories including one No single core 4 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified & as directed by Engr-in-Charge. (Note - Two run single core cable, One run of earth conductor and one run of PVC conduit shall be measured as a unit length.)
Supply & fixing epoxy powder coated distribution board VTPN, 4 way , vertical type (IP 43) with incomer as MCCB and outgoing MCBs with copper bus bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and directed by Engr-in-Charge
Supply & fixing epoxy powder coated distribution board TPN, 4 way , horizotal type (IP 43) with incomer as MCB and outgoing MCBs with copper bus bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and directed by Engr-in-Charge
Supply and fixing MCB SPN 6-32Amps , rupturing capacity 10 KA, C curve ISI marked complete all as specified and as directed by Engineer in Charge.
Supply & fixing blank plate MCB DB complete all as specified and directed by Engr-in-Charge
Supply and fixing MCB single pole 6-32Amps , rupturing capacity 10 KA, C curve ISI marked complete all as specified and as directed by Engineer in Charge.
Supply and fixing MCB triple pole 32Amps 415volt, rupturing capacity 10 KA, C curve ISI marked complete all as specified and as directed by Engineer in Charge.
Supply and fixing MCB TPN 32Amps 415volt, rupturing capacity 10 KA, C curve ISI marked complete all as specified and as directed by Engineer in Charge.
Supply and fixing MCCB 4pole 63Amps 415volt, capacity with adjustable thermal and magnetic release rupturing capacity 16 KA, marked complete all as specified and as directed by Engineer in Charge.
Supply and fixing energy saving ceiling fan 1200 mm(minimum) sweep three blade, 5 star BEE rating including clamp set, hanging rod and necessary connecting PVC insulated Flexible cable of size 0.75 sqmm copper conductor for connection from ceiling rose to fan and connecting complete all as specified and as directed.
Supply, & fixing exhaust fan 450 mm sweep, 1400RPM metal body 230 volts, single phase, AC supply , industrial type, eletrically connecting with twisted 3 core PVC insulated unsheathed flexible cord copper of size 0.7 sqmm copper conductor cable from ceiling rose to exhaust fan including louver made out of MS sheet 3mm thick of required size as per ground complete all as specified. Note:- (a) cost for making suitable opening in wall for fixing of exhaust fan is deemed to be included in the lumpsump cost of building.
S&F LED battten with extruded aluminium housing and extruded aluminium heatsink for mounting LEDs, Mercury free, Inbuilt driver and decorative end cap. Maximum power consumption 20W with minimum system level efficacy 100 lumens/watt @ 6500 CCT and CRI>80. Operating voltage of 140 - 270V AC, P.F >0.9, 3KV surge protection and current THD<=15% complete with all accessories, including connection with twin core PVC insulated 0.75 Sqmm copper conductor cable upto ceiling rose complete all as specified and directed.
S&F industrial Well glass (clear glass type) LED luminarie 70W , aluminium die cast heat sink for efficient heat dissipation. Maximum power consumption 70W with minimum system level efficacy 100 lumens/watt @5700K CCT and CRI>70. P.F 0.95, 5KV surge protection, THD <10%, IP -65 complete with all accessories, including connection with twin core PVC insulated 0.75 Sqmm copper conductor cable upto ceiling rose complete all as specified and directed.
Supply , Fixing & testing LED street light fitting of 25 Watt with electronic driver and made of pressure die cast aluminium housing with high power LED's as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP65 protection and impact resistance of IK07 with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver with efficiency > 85% with inbuilt protection against lightning, over voltage, short circuit and surge/spike protection upto 10 KV ensuring longer life (THD <10%, PF shall be > 0.95, colour temperature 5700±300 K), Life expectancy of LED's minimum 50,000 burning hrs, warranty of complete luminaries fitting shall not less than three years. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture. The light fitting shall be fixed on pole with and including 32 mm dia (or size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr long complete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer including internally pre-wired connecting up with twin core 1.5 sq. mm copper conductor flexible wire/cableconnection complete all as specified and directed.
Materials and labour for Earthing complete with GI earth plate electrode 60 cm X 60 cm X 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.50 mtr below normal ground level connected to GI earth lead 4 mm dia by means of GI bolts, nuts, check nuts, washers made out of GI/steel, all as shown on electrical plate No 3 of MES schedule part-I, earth lead strip connected to indicated position including 7.5m long 15 mm bore GI pipe for earth wire protection and concrete pit in PCC(1:3:6, C1),Precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mesh including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil and testing on completion complete all as specified and as directed by Engineer in Charge.
ITEM NO 8.23 CONT.... (v) Phase indicator lamp R-Y-B, neon type (Set of Three)- 01 Set Outgoing ((i) MCCB 63 amps, 4 pole, breaking capacity 16 KA suitable for operation of 415 volts AC 50 HZ - 01 No (ii) MCB 6-32amps, 2 pole, breaking capacity 10 KA, C curve suitable for operation of 240 volts AC 50 HZ - 02 Nos
Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality laid dry in trenches for protection of underground cable all as specified and directed.
Material and labour for liquid seal coat, applying evenly binder @9.8 Kg per 10 sqm blinding with 6.3mm size stone chippings @ 0.09Cum per 10sqm and rolled to a uniform smooth surface complete all as specified and directed.
Taking down old aluminium XLPE cable of any size and from any position complete all as specified and directed.
Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes etc. for area filling / forming embankments including raising (any height from existing OGL) by approved earth and including raising earth spreading in layers not exc 30 cm thick each layer, watering, compaction with 8 tonne to 12 tonne power roller and finished to required size and shape etc, any high / depth from OGL. Notes :- (i) Earth required for the item, shall be supplied by contractor, from out side MOD land of any lead, at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor. (iii) With reference to clause 3.6 of MES schedule Part-II on serial page No.21 it is clarified that measurement of the above item shall be of finished embankment/traverse of filled earth after consolidation/compaction and 5% deduction shall be made from measured and calculated volume to allow for increase in bulk. (iv) Total quantity / partial quantity of earth may not be available in Guwahati/Narangi area. The contractor shall bring the earth outside area and it is advised to quoted the rate considering availability of soil and its lead involved.
shassengineers
M/S PRASANTA MAHANTA
M/S UTTAM SAHA
Brahmaputra Commerce and Trade
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .